PR1MA™ Mini Gel Electrophoresis System

• Complete system, includes gel box, power supply and casting sets
• Quick and easy gel casting, no tape, clamps or spacers required
• Compact design, footprint: 7 x 5.1 in.

The PR1MA™ Mini Gel electrophoresis system includes all of the equipment that you need to get up and running: gel tank, power supply, and two casting sets. Ideal for personal use, small laboratories, or the classroom, this gel box/power supply combination is compact and easy to use.

The mini gel box attaches directly to the power supply for a secure connection every time. Selectable parameters include 3 preset voltages – 35V, 50V or 100V – and a 99-minute timer. All are set using the membrane keypad.

The safety lid is vented to help dissipate heat generated during electrophoresis and features a viewing area above the gel. Current will only run through the system when the lid is properly in place on top of the gel box.

Trays and casting stands for both 10.5 x 6 cm and 5 x 6 cm gels are included with the PR1MA™ Mini system, as are double-sided combs. The smaller tooth combs are compatible with multi-channel pipettes. Casting is quick and easy – just place the tray in the casting stand and pour. The trays feature a dark contrast strip to help visualize wells while loading and lines that fluoresce under UV and blue light to track the progress of the run.

Specifications

myGel InstaView™ System | Complete System with Power Supply

• View DNA migration and separation as it happens
• Blue light illumination - won't damage DNA
• Capture high-resolution images without removing the gel from the tank

The myGel InstaView^™ comes complete with everything needed to cast, run, and view mini electrophoresis gels, including an integrated power supply. One large (10.5 x 10 cm) or small (10.5 x 6 cm) gel is accommodated by the gel tank. Gels are easily poured using the supplied trays, combs, and leak-proof casting stand. The power supply connects directly to the gel tank – no more leads to contend with. The connection is guaranteed to be right, every time.

Output voltage can be adjusted to 35V, 50V, or 100V and run time can be set for up to 99 minutes. A magnetic interlock between the gel tank and the lid prevents current from running through the system when the lid is not properly in place.

Once the myGel InstaView System is set up, simply slide the mini LED transilluminator into place under the tank and at any time turn it on to view the run in real-time. An array of blue LEDs emits bright blue light at a wavelength of 465 nm for optimal excitation of common green fluorescent stains such as SmartGlow^™, SYBYR^™ Green, and Gel Green, without damaging DNA. An orange filter is incorporated into the lid for visualizing DNA bands without any additional equipment or special glasses. When it’s time to document results, place the included gel imaging enclosure over top of the myGel InstaView, and use the camera app on any smartphone to capture high-resolution images without removing the gel from the tank.

Images are easily shared via email or text message or printed.
 

Specifications

InstaView Gel Tank

For labs that prefer to use a separate power supply, the InstaView Gel Tank is the perfect choice for running, viewing, and documenting electrophoretic separations. The InstaView Gel Tank accommodates one large (10.5 x 10 cm) or one small (10.5 x 6 cm) gel tray and is supplied with trays, combs, and a leak-proof casting stand. The gel tank lid includes attached power leads which prevent the unit from operating without the lid properly in place.

Any standard power supply can be connected, including the Accuris myVolt^™ Mini and myVolt Touch. The InstaView Gel Tank is shaped to allow the mini-LED transilluminator (included) to slide underneath. Blue light, at a wavelength of 465 nm, provides excitation of common green fluorescent stains such as SmartGlow^™, SYBR^™ Green, and GelGreen. An orange filter is incorporated into the gel tank lid for visualizing the DNA in the gel box without any additional equipment or glasses. The transilluminator can be turned on at any time during a run to track progress and automatically shuts off after 5 minutes.

After electrophoresis, simply place the included imaging enclosure over the InstaView Gel Tank to capture high-resolution images with a smartphone. Images are easily printed or shared via email or text message.

Specifications 

Safety	Physical interlock between lid and tank
Buffer Volume	230 mL
Gel Capacity	1-10.5 x 10 cm or 1-10.5 x 6 cm gels, 0.5 cm thick
Transilluminator	Blue LED, 465 nm
WxDxH (w/enclosure)	7.5 x 8.25 x 5 in /19 x 21 x 14 cm
Weight	1.65lb/0.75kg
Electrical	115V, 60Hz or 230V, 50Hz
Warranty	2-year

  

System & Accessories

Double sided water cooled vertical system, 10cm x 10cm

Extra Wide Large Format Gel System, 23.5cmW x 40cm

•     Heavy duty lower buffer chamber
•     Interlock safety lid with attached leads
•     End gated 23cm wide x 40cm long ExpressCast™ UV-transparent gel tray with built-in fluorescent ruler and 12 comb slots.
•     Two 1.5mm x 25 tooth combs
•     Two 1.5mm x 50 tooth combs

Extra Wide Format Gel System, 23.5cmW x 25cmL

•     Heavy duty lower buffer chamber
•     Interlock safety lid with attached leads
•     End gated 23cm wide x 25cm long ExpressCast™ UV-transparent gel tray with built-in fluorescent ruler and 14 comb slots.
•     Two 1.5mm x 25 tooth combs
•     Two 1.5mm x 50 tooth combs

Double sided water cooled vertical system, 20cmW x 10cm

Double sided non cooled vertical system, 20cmW x 10cm

•     Heavy duty upper buffer chamber with cooling port connections
•     Lower buffer chamber
•     Interlock safety lid with attached leads
•     Casting base
•     Four-pack each of plain and notched glass plates
•     One acrylic blocker plate (used when only one gel is being run)
•     Eight 0.8mm thick side spacers
•     Four combs of your choice

•     Alumina cooling plate for use with cooling systems. This plate can be sandwiched between the gel and the inner buffer chamber to improve overall temperature uniformity.
•     Casting base for quick, efficient and leak-proof gel casting.

ENDURO VE20 Vertical Gel Electrophoresis System

Enduro VE20 Vertical Electrophoresis System (20 x 20 cm), includes glass plates, 2 x 24 well combs, cooling coil and casting base

• Large format vertical gel system
• Electroblotting and gel electrophoresis in same universal gel tank
• Quick assembly system for ease of use
• Complete system allows casting of gels and running of gels at same time increasing efficiency

The ENDURO VE20 is Labnet's new large format vertical gel electrophoresis system. It distinguishes itself in its flexibility of applications and ease of gel casting and set-up requiring only 4 screws to secure 4 gels. The same gel tank can house a large format electroblotting assembly sold separately. This system is ideal for first- and second dimension SDS-PAGE, native, preparative, gradient and high-resolution nucleic acid electrophoresis.

Innovative screw-clamp technology consists of only four screws to secure up to four 20 x 20cm gels. This vertical screw clamp technology distributes pressure evenly along the height of gel rather than in the center to eliminate plate bowing and gel compression, while maintaining a leak-proof seal during casting.

NO TANK TOP ASSEMBLY
A built-in inner buffer chamber within the PAGE insert allows set up to be completed without inclusion of an upper buffer chamber.

CASTING ADVANTAGES

• Dual purpose PAGE insert eliminates time consuming transfer of glass plates between separate casting and gel running components.
• Glass plates with bonded spacers assure clean well formation, correct alignment for leak-free casting and eliminates manually aligning spacers.
• Casting stand design ensures leak-free casting even if glass plates are misaligned.

Specifications:

ENDURO™ Semi Dry Blotter

• Western, Southern, and Northern Blots
• Rapid transfer times
• Uniform head dispersion
• Variable gel thickness
• Minimal buffer volume

The ENDURO™ Semi-Dry Blotter provides great flexibility in a lab since it can be used for all types of blotting: Western, Southern, and Northern. Blotting with the ENDURO™ Semi Dry Blotter typically can be done in 15 to 30 minutes making it a fast and easy way to do all your blotting applications. Set up procedures are easy and economical with little buffer needed. The screw down lid adjusts to varying gel thicknesses and sizes while the platinum coated electrodes provide uniform pressure ensuring even transfers. To provide your lab with total blotting solutions use with our ENDURO™ 250V, 3000mA high current power supply.

Specifications

Semi-Dry Blotting Systems, 10cm x 10cm

Wide Format Gel System 23.5 cm x 14 cm

•     Heavy duty lower buffer chamber
•     Interlock safety lid with attached leads
•     Non-gasketed 23cm wide x 14cm long UV-transparent gel tray with built-in fluorescent ruler and 4 comb slots.
•     Four 1.5mm x 50 tooth combs
•     Opaque well visualization plate.

Minigel System 9cm x 11cm & (1) 10 and (1) 14 tooth comb

•     Heavy duty lower buffer chamber
•     Interlock safety lid with attached leads
•     Gasketed (cast in place) 9cm wide x 11cm long UV-transparent gel tray with built-in fluorescent ruler and 2 comb slots.
•     One 1.5mm x 10 tooth comb
•     One 1.5mm x 14 tooth comb