S2K Commerce - Products Dropdown
ActionsS2K Commerce - Shopping Cart
ActionsS2K Commerce - Order Entry
ActionsIncu-Shaker™ - Stackable Shaking Incubator
Highlights:
- Stainless steel chamber provides premier temperature uniformity
- Proven reliable, maintenance-free Incu-Shaker™ motor drive system
- Bright, intuitive touch-screen controls
- Instantly change flask clamps with MAGic Clamp™ accessories
- Included pull-out adjustable shelf for static incubations
Stackable MiniRoller
Specifications:
|
Benchmark™ Mini Nutating Rocker
- Includes dimpled mat; ideal for mixing in blood & centrifuge tubes
- Tri-directional motion for thorough, uniform mixing
- Cold room and incubator safe
The Mini Rocker is a multi-functional shaker that provides a three-dimensional nutating motion for thorough foam-free mixing in tubes as well as a variety of flat vessels. The model comes standard with an autoclavable dimpled mat and optional flat mats are available for mixing with other vessel types. This mixer features maintenance-free, brushless motors and is capable of loads up to 2 kg, and is safe for use in cold rooms or incubators.
The Benchmark™ Mini Nutating Rocker comes with a flat cord and an 8 x 6-inch platform with dimpled and flat mats. The rocker is designed to fit inside Digital Mini Incubators (H2200-H/H220-HC)
Specifications
Speed | Fixed 24 rpm (20 rpm for 230v) |
Tilt Angle | Fixed; +/- 20° |
Platform Size | 8 x 6 in. |
Load Capacity | 4 lbs./ 2 kg |
Operating Temp Range | +4 to +65° C |
Electrical | 115V or 230V, 50-60 Hz, 50W |
Warranty | 1 year |
This Single-Deck, compact unit is a conventional type roller designed to hold two vessels, 108 to 121mm in diameter and up to 290mm long. The two outside rollers can be adjusted inward to accomadate bottles as small as 75mm in diameter. A maximum of 2 additional decks can be added to increase capacity. Use of unit in CO2 incubator may necessitate more frequent replacment of the motor brushes. Supplied without vessel and conforms to UL, CSA, and CE standards.
Bottle Speed | 0.1 to 3.8rpm |
Bottle Size Accepted | 75 - 121mm D x 290mm |
L Max Temp | 40°C |
Dimesions (L x W x H) | 32cm x 32.5cm x 18cm
|
Weight | 18lbs |
Bottle Benchtop Roller, Small
- CO2 incubator compatible
- Digitally controlled speed, up to 80 cycles/min
- Adjustable tilt from 1 to 18 degrees
- Multiple sizes and with 2, 3 and 4 platforms
- 4 year warranty - designed to last, rugged construction
- Made in the USA
- Infinity Rocker Pro (IR101) - 11x14 inch platform
- Infinity Rocker Mini (IR102) - 8x9 inch platform
- Infinity Rocker XL (IR103) - 20x16 inch platform
- 11 x 14, 8 x 9, and 20 x 16 inch (28 x 36, 20 x 23, and 51 x 41 cm) platforms.
- Removable TIER 2 stacking trays double the support surface area. The trays just snap onto the platform and their spring loaded legs hold them securely in place.
Double, Triple and Quadruple Deckers:
- Stack 2, 3 & 4 versions provide 2 - 4 times as much capacity. The 2, 3 & 4 platforms each tilt about their own axis
- Offer a microcontroller to accurately control the speed to within 1 RPM. With the digital speed control, you can set the speed in increments of 1 RPM, from 1 to 80 RPM.
Unit |
Platforms |
Stacking Tray(sold separately) |
Size(inches) |
Weight(lbs.) |
Available Speeds(cycles/minute) |
Max Load |
IR101 Pro |
11 x 14 in. |
ST201 or ST405 |
11 wide x 14 deep x 6.5 high |
17 |
1 - 80 |
11 lb. |
IR102 Mini |
8 x 9 in. |
ST02 |
8 wide x 9 deep x 6.5 high |
12 |
1 - 80 |
11 lb. |
IR103 XL |
20 x 16 in. |
ST203 |
20 wide x 16 deep x 6.5 high |
26 |
1 - 80 |
11 lb. |
IR211 |
2 levels |
ST201 |
11 wide x 14 deep x 22 high |
18 |
1 - 80 |
11 lb. |
IR301 |
3 levels |
ST201 |
11 wide x 14 deep x 22 high |
18.5 |
1 - 80 |
11 lb. |
IR401 |
4 levels |
ST201 |
11 wide x 14 deep x 22 high |
19 |
1 - 80 |
11 lb. |
Clearance between levels on rockers:
IR211-12 inches of clearance in between the platforms; ideal for using 2 Stabilizers
IR301- 6.5 inches of clearance in between the platforms
IR401- 4 inches of clearance in between the platforms
Frequently Asked Questions:
Specifications:
Will these rockers work with different voltages (in different countries)?
Yes. The rocker uses 24V DC supplied by a small external power supply that plugs into a wall outlet. Next Advance will supply the appropriate power supply for the local power and wall outlet configuration.
What is the maximum load?
The rocker can handle 11 lbs. (5 kg).
What is the range for the tilt angle?
The amount that the rocker platform tilts back and forth can be adjusted from as little as +/- 1 degree to as much as +/- 18 degrees.
What is the difference between Infinity Rockers and Next Rockers?
Infinity Rockers and Next Rockers are both rugged, quiet, rockers with lots of power. Infinity Rockers have digital speed control and a digital display of the rocking rate in cycles per minute (cpm). Because Infinity Rocker motors are brushless, i.e. do not have brushes that can wear out, they will last for many years.
What is the rocking rate?
For Infinity Rockers, the rocking rate can be as slow as barely moving to a maximum speed of 80 cycles per minute (160 rocking motions per minute). Next Rockers are available in a regular speed range (4 to 80 cycles per minute) or super slow (1 to 20 cycles per minute).
What are the Super Slow versions?
The Next Rockers come in standard and super slow versions. For those applications that require slow, smooth rocking, we recommend the super slow (up to about 20 cycles per minute) versions. They provide finer speed control at the lower speeds. The motor in these versions is geared down for slower operation and greater power, just as gears on a bicycle allow for more power at lower speeds.
Can I use these rockers in incubators or cold rooms?
Our rockers can operate in incubators (up to 60°C) or cold rooms (down to 4°C) if the temperature is kept constant and the humidity is not excessive. Temperature swings which cause condensation will damage the electronics and void the warranty. In fact, the electronic circuitry includes additional heat sinks to ensure reliable operation at elevated temperatures.
Operation:
How do I adjust the tilt angle?
To adjust the angle, use a flat blade screwdriver to loosen the labeled screw on the rear of the instrument, slide the linkage to the desired position, then tighten the screw.
How do I adjust the rocking rate?
You can turn the knob on the front of the instrument to adjust the rocking speed.
Can I clean the rubber mat?
Yes. You can remove the rubber mat from the platform and clean it with soap and water. Let it dry before placing it back on the platform.
The Stovall Low Profile Roller is designed as a compact, space saving, non-dedicated instrument which performs multiple functions in the biological research laboratory. It operates on benchtops, in high humidity and CO2 incubators, high temperatures ovens (up to 65°C) and in refrigerated units (up to 0°C).
The low profile roller provides a convenient fit into laboratory incubators, ovens and refrigerated units without rearranging shelves or disturbing other materials. The variable speed control allows speeds of 2-38 rpm during use. With its industrial grade drive train and chemical resistant finishes this low profile roller will provide many years of great service to your lab!
Warranty: 1 year
Input Voltage: 90-240V
Roller Speed: 2-38 rpm
Max Load: 4L of liquid
Ambient Temp. Operation: 0°C to 65°C
Technical Data:
- Dimensions: 14-¼ " W x 15" D x 2 3/8" H
- Weight: 10.5 lbs ~ 4.8 kg
- Rollers: 1 1/8" diameter
- Speed: 3 - 30 rpm
Available platforms increases capacity.
ACCRL0001 |
Single Platform Stack |
ACCRL0002 |
Double Platform Stack |
ACCRLSR10 |
Single Roller |
ACCRLRN30 |
O-Ring Packet |
3D Stackable Mini Roller
- Wide range of speed adjustments for a variety of applications
- Anti-corrosive and wear-resistant construction for use in humid and CO2 environments
- Easy to add or remove rollers to fit different-sized tubes or bottles
- A stackable mechanism allows two units to be stacked for space savings
- A remote control box makes it easy to operate the unit while it is in an incubator
Specifications:
Model | MR-03UA |
Number of Roller Bars | 11 pcs |
Speed | 0.5~80 rpm |
Speed Accuracy | ±1 rpm |
Roller Dimensions (D×L) | Ø28 x 269 mm (Ø1.1 × 10.6 in.) |
Swing Dimensions | 18 mm (0.71 in.) |
Available Tubes or Bottles | Max. Ø120 mm (4.72 in.) bottles/tubes |
Max. Load | 6.5kg (14.33 lbs) with the container, 3 × 1,500 mL bottles |
Digital Display | Roller Speed Display |
Timing Range (Control Box) | 0~999 min or continuous operation |
Included Accessory Standard in Packaging | MRA02, MRA03, MRA05 |
Ambient Temperature | 5 ~ 60 |
Relative Humidity | ≤95% |
Power Supply | AC110 / 60Hz |
Max. Power | 10W |
Dimensions (D×W×H) | 360 x 378 x 72 mm (14.17 x 14.88 x 2.83 in.) |
Net Weight | 6.5kg (14.33 lbs) |
Stacking | Optional |
Protection Level | IP21 |
Certifications | cCSAus, WEEE, RoHs, CE |
Aspire Aspirator
- Compact Design
- Built-in Vacuum Pump
- Adjustable Vacuum Pressure
- Vacuum Gauge
- Safe and Precise Aspiration
The Accuris ASPIRE Laboratory Aspirator incorporates a quiet, maintenance-free pump inside a sturdy, yet compact base. The vacuum is fully adjustable, with a pressure gauge that displays the vacuum level, allowing full control of aspirating speed. The ASPIRE is an ideal choice for a wide range of laboratory aspirating applications, including removal of media from tissue culture vessels or plates, and supernatants. An ergonomic, hand held aspirating device is included, and holds standard 200 to 300ul disposable pipette tips.
Comes complete with:
- Base with internal vacuum pump
- 2 Liter, Polycarbonate Collection Bottle (autoclavable and break resistant)
- Antibacterial / Hydrophobic Filter
- Silicone Tubing
- Handheld Vacuum Controller
- 2 Pipette cone adapters (for 200 ul pipette tips and 40mm stainless steel)
The collection bottle incorporates a reliable Overflow Protection Valve that closes off the tube to the vacuum in the event of a full bottle. In addition, the replaceable in-line filter protects the vacuum pump from contaminants and any moisture that comes through the bottle. Graduations on the collection bottle indicate the amount of fluid collected and when it's ready to be emptied. The Handheld Vacuum Pipette has an ergonomic design that's comfortable in the hand during prolonged use. Pressing the button applies the vacuum. The pipette accepts Pasteur pipettes, serological pipettes, and also comes with 2 accessory pipette cones. One cone is designed to accommodate 200/300ul pipette tips, the other has a thin, stainless steel capillary for fine control aspirating.
Specifications
Max. Aspiration | 14 mL/sec |
Max. Flow | 15 L/ min. |
Vacuum Range | -30 to -750 mbar |
Noise Level | 59.6 db |
Vacuum Pump | oil free piston |
Dimensions | 9.5 x 7.9 x 13.5 in. |
Weight | 4.8 lbs |
Warranty | 2 years |
Item # | Description |
V0020 | 115 V ASPIRE Aspirator |
V0020-E | 230 V ASPIRE Aspirator |
V0020-1SL | Extra Long Single Channel Stainless Steel Adapter |
V1002-8 | Eight channel adapter for 200 µl pipette tips |
V1002-S8 | Eight channel adapter, fine tip, stainless steel |