Home  >  PCR, Protein, RNA, DNA  >  PCR  >  Equipment  >  Electrophoresis
|◀ ◀ 13 - 24 of 37 ▶ ▶|
View:

Extra Wide Large Format Gel System, 23.5cmW x 40cm

 
Extra wide large format gel system, 23.5cmW x 40cmL gel size with buffer exchange ports, UVT gel tray with fluorescent ruler and 12 tray slots, (2) 25 teeth combs, 1.5 mm thickness and (2) 50 teeth combs, 1.5 mm thickness.
System Description

For long run lengths, maximum resolution, and really large sample capacity, look no further than the Galileo 2340 device. This unit also features the Galileo ExpressCast system for quick tape-less gel pouring.

The 2340 is our maximum capacity system. With a maximum run length of 25cm, the unit can provide very high resolution of complex analytes. Or, fitted with maximum capacity combs in all of the tray's 12 comb slots, the unit can handle up to 600 samples. The 2340 features the Galileo ExpressCast gel casting system for quick, tape-free gel casting and includes a built-in bubble level and leveling screws for convenient level adjustment. You may choose from a wide variety of comb options to customize your order.
System Features

The Galileo 2340 complete system includes these features:

  •     Heavy duty lower buffer chamber
  •     Interlock safety lid with attached leads
  •     End gated 23cm wide x 40cm long ExpressCast™ UV-transparent gel tray with built-in fluorescent ruler and 12 comb slots.
  •     Two 1.5mm x 25 tooth combs
  •     Two 1.5mm x 50 tooth combs
Item#:
ASEXTRAWIDELGFOR23

MaGELin Mini Protein System

  • For 10 cm x 10 cm cast-your-own polyacrylamide gels
  • Comes with dual casting system
  • 3 sets of glass plates and 2 sets of 0.8 mm thickness spacers.
  • Buffer tank, dual gel capture, vented lid and power cords included

The IB94000 MaGELin Mini protein system comes complete with everything you need to pour 10 cm x 10 cm cast-your-own gels. This highly versatile system will also accommodate the IB95000 Western Transfer module so when you’re not running gels the unit can be used as a dedicated Western transfer system.
 

The IB94000 comes complete with:

  • Dual gel capture device for running two gels simultaneously.
  • Dual gel casting system that allows casting outside of the running unit.
  • Three sets of glass plates for pouring and running gels
  • Two sets of special 0.8 mm side spacers to seal the gel sandwich during pouring
  • Buffer tank
  • Vented lid
  • Power cords.
  • Two 0.8 mm x 12-tooth combs.

The IB94000 utilizes a unique spacer and casting system to make it easy and fast to cast your own gels. The special side spacers are made specifically to accommodate the thickness of each glass slide that comes with the unit. These side spacers will produce a 0.8 mm thick gel. Once the glass plates have been assembled using the side spacers, they can now be inserted into the gel casting unit. This unit accommodates two sets of glass plates simultaneously. The bottom of the gel casting unit contains a very soft gel-like gasket that will seal the bottom of the gel sandwich. Once the gel sandwich is placed inside the casting unit, place the lid of the casting unit on top and press gently to fasten using the included thumb screws. Once fastened the lid will provide the correct amount of down pressure on the gel sandwich to seal the bottom and hold them in place. The polyacrylamide solution can now be introduced through the opening in the casting fixture lid. 

Item#:
ASMAGELINMINI

Extra Wide Format Gel System, 23.5 cm x 25 cm

 ExpressCast extra wide format gel gystem for 23.5cmW x 25cmL gel size. Includes UVT gel tray with fluorescent rulers and 14 comb slots, (2) 25 tooth combs, 1.5 mm thickness, and (2) 50 tooth combs, 1.5 mm thickness and gasketed end-gates.
System Description

Need long run lengths for maximum resolution, and large sample capacity too? Look at the features of the Galileo 2325 unit and we think you will find just what you need.

The 2325 is a full sized large capacity system. With a maximum run length of 25cm, the unit can provide high resolution of complex analytes. Or, fitted for maximum capacity, the unit can handle up to 500 samples. The 2325 features the Galileo ExpressCast gel casting system for quick, tape-free gel casting and includes a built-in bubble level and leveling screws for convenient level adjustment. You may choose from a wide variety of comb options to customize your order.
System Features

The Galileo 2325 complete system includes these features:

  •     Heavy duty lower buffer chamber
  •     Interlock safety lid with attached leads
  •     End gated 23cm wide x 25cm long ExpressCast™ UV-transparent gel tray with built-in fluorescent ruler and 14 comb slots.
  •     Two 1.5mm x 25 tooth combs
  •     Two 1.5mm x 50 tooth combs
Item#:
ASEXTRAWIDEFOR23

Double sided water cooled vertical system, 20cmW x 10cm


The Galileo Bioscience Reflection 2010 is a wide, high capacity gel electrophoresis separation system that allows users to run up to two protein gels simultaneously on a 20 cm wide x 10 cm tall format.  The large gel format makes this unit ideal for users who have a large number of protein samples to run simultaneously.  Galileo's unique casting base allows users to both cast and run gels without ever having to unclamp the upper buffer chamber.  This makes handling gels safer and more convenient, especially for those who may be prone to ripping their gels between the two activities. 

The 2010 vertical gel box also includes a water cooling feature for electrophoresis protocols that require lower temperature.  This water can be provided by the tap or other temperature controlled source and is easily connected by attaching standard tubing over the 3/8" barbed in/out ports on the device.  Users may also facilitate cooling efficiency and uniformity using Galileo's optional alumina backer plates (see accessories below).

System Features

Each Reflection 85-2010-V vertical system includes the following features:

  • Heavy duty upper buffer chamber with cooling port connections
  • Lower buffer chamber
  • Interlock safety lid with attached leads
  • Casting base
  • Four-pack each of plain and notched glass plates
  • One acrylic blocker plate (used when only one gel is being run)
  • Eight 0.8mm thick side spacers
  • Four combs of your choice
  • System Accessories

Alumina cooling plate for use with cooling systems. This plate can be sandwiched between the gel and the inner buffer chamber to improve overall temperature uniformity.
 
Casting base for quick, efficient and leak-proof gel casting.
Item#:
ASDOUBLESIDEWATVER20

Double sided non cooled vertical system, 20cmW x 10cm


 The Galileo Bioscience Reflection 2010 is a wide, high capacity gel electrophoresis separation system that allows users to run up to two protein gels simultaneously on a 20 cm wide x 10 cm tall format.  The large gel format makes this unit ideal for users who have a large number of protein samples to run simultaneously.  Galileo's unique casting base allows users to both cast and run gels without ever having to unclamp the upper buffer chamber.  This makes handling gels safer and more convenient, especially for those who may be prone to ripping their gels between the two activities.

The 2010 vertical gel box also includes a water cooling feature for electrophoresis protocols that require lower temperature.  This water can be provided by the tap or other temperature controlled source and is easily connected by attaching standard tubing over the 3/8" barbed in/out ports on the device.  Users may also facilitate cooling efficiency and uniformity using Galileo's optional alumina backer plates (see accessories below).

System Features

Each Reflection 85-2010-V vertical system includes the following features:

  •     Heavy duty upper buffer chamber with cooling port connections
  •     Lower buffer chamber
  •     Interlock safety lid with attached leads
  •     Casting base
  •     Four-pack each of plain and notched glass plates
  •     One acrylic blocker plate (used when only one gel is being run)
  •     Eight 0.8mm thick side spacers
  •     Four combs of your choice

System Accessories

  •     Alumina cooling plate for use with cooling systems. This plate can be sandwiched between the gel and the inner buffer chamber to improve overall temperature uniformity.
  •     Casting base for quick, efficient and leak-proof gel casting.
Item#:
ASDOUBLESIDENONCO20

ENDURO VE20 Vertical Gel Electrophoresis System


Enduro VE20 Vertical Electrophoresis System (20 x 20 cm), includes glass plates, 2 x 24 well combs, cooling coil and casting base

  • Large format vertical gel system
  • Electroblotting and gel electrophoresis in same universal gel tank
  • Quick assembly system for ease of use
  • Complete system allows casting of gels and running of gels at same time increasing efficiency

The ENDURO VE20 is Labnet's new large format vertical gel electrophoresis system. It distinguishes itself in its flexibility of applications and ease of gel casting and set-up requiring only 4 screws to secure 4 gels. The same gel tank can house a large format electroblotting assembly sold separately. This system is ideal for first- and second dimension SDS-PAGE, native, preparative, gradient and high-resolution nucleic acid electrophoresis.


Innovative screw-clamp technology consists of only four screws to secure up to four 20 x 20cm gels. This vertical screw clamp technology distributes pressure evenly along the height of gel rather than in the center to eliminate plate bowing and gel compression, while maintaining a leak-proof seal during casting.

NO TANK TOP ASSEMBLY
A built-in inner buffer chamber within the PAGE insert allows set up to be completed without inclusion of an upper buffer chamber.

CASTING ADVANTAGES

  • Dual purpose PAGE insert eliminates time consuming transfer of glass plates between separate casting and gel running components.
  • Glass plates with bonded spacers assure clean well formation, correct alignment for leak-free casting and eliminates manually aligning spacers.
  • Casting stand design ensures leak-free casting even if glass plates are misaligned.

Specifications:


Plate Dimensions (w x h x t)

20 x 20 x 0.4 cm

Standard Spacer (w x h)

2 x 20 cm

IPG Spacer (w x h)

0.6 x 20 cm

Unit (w x d x h)

30 x 18 x 27 cm

Unit weight

5.5 lbs

Number of gels

4

Total volume inner buffer chamber

640 mL

Total buffer volume for 2 gels

5.3 L

Total buffer volume for 4 gels

4.8 L

Standard run time for SDS-PAGE without coolling

4-5 hr

Standard run time for SDS-PAGE with coolling

3-4 hr

 

Order#

Description

E2020

Enduro VE20 Vertical Electrophoresis System (20 x 20 cm), includes glass plates, 2 x 24 well combs, cooling coil and casting base

E2020-CU

Enduro VE20 Dual Casting System, includes 20 x 20 cm Dual, 2 sets of glass plates, 1 mm think bonded spacers, 2 x 24 sample, 1 mm thick combs, cooling coil, dummy plate; also includes caster and external casting

E2020-IEF

Enduro VE20 IEF Conversion Kit for 18 cm IPG strips and Tube gels

E2020-TB

Enduro VE20 Blotting System, 20 x 20 cm System Including tank and lid, 4 cassettes, 18 fibre pads, cooling coil
Item#:
ASPCRELCTP23

ENDURO™ Semi Dry Blotter

  • Western, Southern, and Northern Blots
  • Rapid transfer times
  • Uniform head dispersion
  • Variable gel thickness
  • Minimal buffer volume

The ENDURO™ Semi-Dry Blotter provides great flexibility in a lab since it can be used for all types of blotting: Western, Southern, and Northern. Blotting with the ENDURO™ Semi Dry Blotter typically can be done in 15 to 30 minutes making it a fast and easy way to do all your blotting applications. Set up procedures are easy and economical with little buffer needed. The screw down lid adjusts to varying gel thicknesses and sizes while the platinum coated electrodes provide uniform pressure ensuring even transfers. To provide your lab with total blotting solutions use with our ENDURO™ 250V, 3000mA high current power supply.


Specifications

Dimensions

32.5 x 25 x 5.5 cm | 12.8 x 9.8 x 2.2 in

Buffer Volume

20 mL

Sample Capacity

4 Blots: 8 x 8.5 cm | 2 Blots: 16 x 8.5 cm | 1 Blot: 16 x 17.5 cm
Item#:
ASDRYBLOT

Semi-Dry Blotting Systems, 10cm x 10cm


Choose Galileo Insight™ semi-dry sytems for rapid and efficient molecular transfer.
Galileo semi-dry electroblotters provide quick and efficient transfer of nucleic acids and proteins from agarose or acrylamide gels. Since only the tranfer "sandwich" of gel, membrane and blotting papers must be kept wet, much less buffer is required than traditional tank transfer systems. Solid plate style electrodes (stainless steel cathode and platinum anode) assure even and complete molecular transfer.

Item#:
ASSEMIDRYELECT1010

Wide Format Gel System 23.5 cm x 14 cm


 Horizontal Wide Format Gel System for 23.5cm x 14cm gels. Includes UVT gel tray four comb slots and end gates & (4) 50 Tooth combs, 1.5 mm thickness.
System Description

A high-capacity system in a mini-gel size, the Galileo 2314 unit enables rapid separation of large numbers of samples.

The 2314 wide format system accomodates up to 200 samples per run, for quick separation and high thru-put. Because of the wide format of the Galileo 2314 unit, the 23cm wide by 14cm long tray is non-gasketed. Gel casting can be accomplished by taping, or we recommend the G-80-WADJ-CST multi-casting unit for even quicker and more convenient gel casting. The gel tray is UV transmissible, includes an imprinted fluorescent ruler, and has 4 comb slots. Choose from a wide variety of comb options, all with micro-titer spacing for easy loading with multi-channel pipets.
System Features

The Galileo 2314 complete system includes these features:

  •     Heavy duty lower buffer chamber
  •     Interlock safety lid with attached leads
  •     Non-gasketed 23cm wide x 14cm long UV-transparent gel tray with built-in fluorescent ruler and 4 comb slots.
  •     Four 1.5mm x 50 tooth combs
  •     Opaque well visualization plate.
Item#:
ASWIDEFORGELSY23

Minigel System 9cm x 11cm & (1) 10 and (1) 14 tooth comb


Horizontal gel electrophoresis minigel system for 9cm x 11cm minigels. Includes gasketed UVT gel tray with fluorescent ruler, and (1) 10 and (1) 14 tooth comb, 1.5 mm thickness. Comb substitutions are available. Four year manufacturer warranty.

System description

The standard 0911 mini gel system includes a RapiCast™ gasketed gel tray for convenient gel casting right in the buffer chamber.

System features

The 0911 complete system includes these features:

  •     Heavy duty lower buffer chamber
  •     Interlock safety lid with attached leads
  •     Gasketed (cast in place) 9cm wide x 11cm long UV-transparent gel tray with built-in fluorescent ruler and 2 comb slots.
  •     One 1.5mm x 10 tooth comb
  •     One 1.5mm x 14 tooth comb
Item#:
ASMINGEL9AND11S

Double sided non- cooled vertical system, 10cm x 10cm


 Reflection double sided water cooled vertical system, 10cm x 10cm with or without casting base, two pack each of plain and notched glass, one acrylic blocker plate, (2) 10-well 0.8mm thickness combs, (4) 0.8 mm spacers. Four year warranty.
System Description

Run either one or two gels simultaneously on these versatile separation systems. The 10x10cm size of the system also accomodates most pre-cast gels.

Complete double sided vertical system for running one or two gels, in a 10 x 10 cm format. Unique casting bases allows both casting and running of gels without unclamping from the upper buffer chamber, providing for safer and more convenient gel handling. In addition the 1010 device will accommodate most precast gel cassettes on the market.

Water cooling feature is included for protocols that require it. Connections are easily made by attaching standard tubing over the 3/8" barbed in/out ports provided on the device. Water may be provided by tap or other temperature controlled water source. Optional alumina backer plates may be used to facilitate cooling efficiency and uniformity, and are available in the accessories list below.
System Features

The Galileo Reflection™ 85-1010 complete system includes these features:

  •     Heavy duty upper buffer chamber with cooling port connections.
  •     Lower buffer chamber.
  •     Interlock safety lid with attached leads.
  •     Casting base.
  •     Two-pack each of plain & notched glass plates.
  •     One acrylic blocker plate (used when running only one gel).
  •     Ttwo 10-well, 0.8mm thick combs
  •     Four 0.8mm thick side spacers.

System Accessories

Choose amoung these accessories to customize each system for your specific needs.

  •     Alumina cooling plate. For use with cooling systems. This plate can be sandwiched between the gel and the inner buffer chamber to improve overall temperature uniformity.
  •     Casting base. For quick, efficient and leak-proof casting.
  •     Multiple gradient caster.
Item#:
ASDOUBSIDNCVER10

ENDURO Modular Vertical Gel System


A modular system allowing PAGE, electroblotting and 2D gel electrophoresis to be carried out in the same tank, simply by changing the inserts. Users can purchase only the parts they need, or a complete combined system for a cost savings over buying all three systems separately.

  • Modular Design
  • PAGE, Electroblotting and 2D Electrophoresis
  • Quick and easy set up
  • Wide range of accessories
 
MODULAR SYSTEM 
 
The modularity of the ENDURO™ System is based on three operational inserts and a common buffer tank. All three inserts, PAGE, electroblotting and 2D electrophoresis, have their own electrode assembly that connects into the lid of the buffer tank. PAGE INSERT Set up of gels is quick and easy with the PAGE insert. A set of plates are placed on either side of the insert and held into place by the pressure bar. An additional gel may be run on each side by stacking the plates. The assembly is then placed into the casting stand for pouring the gel. After the gel is polymerized, the insert is removed from the casting stand and placed in the buffer tank.
 

ELECTROBLOTTING INSERT
 
The electroblotting insert has a capacity for 3 gels. Setting up blots is easy - gels are sandwiched in the blotting cassettes with the transfer membranes. The cassettes are then placed in the insert, which is in turn placed in the buffer tank. Coiled electrodes in the insert generate a high intensity current, allowing transfer to take place in about an hour.
 

2D ELECTROPHORESIS INSERT
 
This insert is used for running the first dimension of IEF gels. Up to ten 8 cm gels are poured in disposable capillary tubes and placed in this insert. Gasketed ports allow for easy insertion and removal of tubes. Blocking plugs are included for closing off ports that are not in use.
 

BUILT FOR SAFETY AND ENDURANCE
 
For leak-proof performance and a long service life, the buffer tank is molded from high quality acrylic. Pins on the top of the inserts ensure that the lid is placed onto the insert in the proper orientation. These pins also aid in removal of the lid. Removing the lid disconnects power to the electrodes.

 
ACCEPTS MOST PRE-CAST GELS
 
Most precast gels, including NuSep™, Bio-Rad™, Invitrogen™, and Cambrex™, can be used with the ENDURO™ PAGE System. The use of precast gels saves time by eliminating the need to pour gels and wait while they polymerize.

 
WIDE RANGE OF ACCESSORIES
 
A variety of combs and spacers of varying widths are available to customize your ENDURO™ system. All are color coded and clearly marked for easy identification. Both notched and plain plates can be purchased with spacers permanently bound for easy set up. Additional fiber pads and replacement cassettes are also available as well as capillary tubes, blanking ports and tube supports. Cooling packs are also available to help reduce buffer temperature during higher voltage or longer runs.
Item#:
ASEDIROMOVERGES
|◀ ◀ 13 - 24 of 37 ▶ ▶|
View: