View:

 
PR1MA™ Standard Petri Dishes

 

PR1MA™ Standard Petri Dishes feature stackable lids for increased stability, flared lid skirts and squared corners for one-hand operation. Growth area 21cm2. Working volume 7-8 mL. 

  • Stronger, heavier construction
  • Surface is hydrophobic and does not facilitate cell attachment
  • Available in four diameters: 35, 60, 100 and 150 mm
  • 35 mm dish has an off-set bottom for improved handling
  • Lids contain molded spacers for gas exchange
  • Stackable lid design for increased stability
  • Packaged sterile (gamma irradiated)
  • Petri Dishes are manufactured in high-capacity automated production lines resulting in high-quality, value-priced products
  • Ventilation ribs reduce condensation and allow air circulation
  • Consistent flatness allows for even media distribution
  • Stackable – Lids contain stacking rings for increased stability
  • Stackable/Slideable – Features partial edge ring on the base which allows a single dish to be slid from a large stack and enhances stability when stacked
  • Slippable – Designed for automated filling and streaking systems, features side arrows and ISO Mark Target for automation



 

Item#:
ASPETRIDISH1

Transfer Pipettes
  • Transparent, nontoxic and inert
  • Precise, uniform drop size
  • Shatter-proof and unbreakable
  • Can be used with LN2 (-196° C)
  • Heat Sealable

These unbreakable, one-piece pipettes eliminate contaminated rubber bulbs, broken glass and exposure to infectious materials. They are made of ultra-clear, low density polyethylene (LDPE) and are ideal for microbiology, blood banking, hematology, immunology, and urinalysis. Sterile pipettes are excellent for tissue culture application. Their low-affinity surface reduces sample, cell or protein loss.
 
Whether you make your selection based on length, build draw, pipette capacity or number of drops per ml, one of these ten designs is likely to be suitable for your application. Some have ultra-fine extended tips (P4113, P4117,P4121, P4122, P4133) that allow for extremely precise dispensing and access into the narrowest vessels. They can also be heat sealed for airtight sample storage. Their uniform drop size can be used for reproducible spotting of gels & TLC plates, and for dispensing into test plates, ID strips, PCR tubes or 96 well plates.

Item #DescriptionQuantity
P4111-005 mL Large Bulb, Graduated, non-sterile, Bulk250
P4111-115 mL Large Bulb, Graduated, sterile, Individually Wrap500
P4111-145 mL Large Bulb ,Graduated, sterile, 20/pk500
P4113-005 mL Large Bulb Graduated to 1ml, Bulk250
P4113-115 mL Large Bulb Graduated, Individually Wrapped500
P4114-007 mL Graduated to 3ml Large Bulb, Bulk250
P4114-117 mL Graduated to 3ml Large Bulb, Individually Wrapped500
P4114-147 mL Graduated to 3ml Large Bulb, 20/pk500
P4115-005 mL Graduated to 2ml Blood Bank, Bulb250
P4115-115 mL Graduated to 2ml Blood Bank, Individually Wrapped500
P4115-145 mL Graduated to 2ml Blood Bank, Bulb, 20/pk500
P4117-003 mL Graduated to 1ml Short Bulb, Bulk250
P4117-113 mL Graduated to 1ml Short Bulb, Individually Wrapped500
P4121-011.5 mL Small Bulb Extended Tip, Bulk500
P4121-111.5 mL Small Bulb Extended Tip, Individually Wrapped500
P4122-015 mL Capacity, Extended Tip, Std Bulb, Bulk500
P4122-115 mL Capacity, Extended Tip, Std Bulb, Individually Wrapped500
P4123-017 mL Capacity, Extended Tip, Large Bulb, Bulk400
P4123-117 mL Capacity, Extended Tip, Large Bulb, Individually Wrapped500
P4132-004 mL Capacity, Short Stem, Bulk250
P4132-114 mL Capacity, Short Stem, Individually Wrapped500
P4132-144 mL Capacity, Short Stem, 20/pk500
P4133-004 mL Capacity, Bulk500
P4133-114 mL Capacity, Individually Wrapped500
Item#:
ASTRANFPIPETS

5-Layer Polystyrene Cell Culture Flask

 
Description
  • Nest Multi-Layer Flasks provide 870 cm2 cell growth surface area. The tissue culture treated NEST Multi-layer Flasks enable you to grow more cells faster and easier, thereby making your cell culture workflow more productive, easier, and in a more convenient manner.
 
Product features
  • Vacuum plasma TC treatment for the best cell attachment
  • Sterilized by E-Beam
  • Non-Pyrogenic, DNase/RNase FREE
  • Both plug seal cap and vent cap are available
  • Growth area: 870cm2
  • TC treatment for better cell attachment
  • Sterilized by E-Beam, non-pyrogenic
  • Tips: To avoid foams and bubbles causing the media in upper layer flowing into the bottom layer, users should be gently when operating the multi-layer flasks.
Item#:
AS5LAYERPOLCECUFK

Suspension Cell Culture Non-Treated Multiple Well Plates

  • Plates are labeled with alpha-numeric markings for easy identification of individual wells
  • Each well has a raised rim which nests into the rings on the single direction lid to reduce evaporation and limit the risk of cross contamination
  • Lids have a stacking feature for added stability when handling tall stacks of plates
  • 1 Well Plate has the same footprint as standard multiple well plates and is useful for high volume and robotic screening of DNA libraries and manual plating; it is also suitable for dot-blotting bacterial clones on 11.4 x 7.3cm (4.5 x 2.875in) nylon membranes
  • 4 well plate is a smaller footprint option which offers well size similar to that of a 24 well plate, but has expanded well spacing to reduce cross contamination
  • 384 Well Plates are ideal for automated applications, colorimetric assays, compound storage or small volume applications


Part Number

Product Description

Pack Description

Qty/Case

229501

1 Well Non-treated Plate with Lid, Individual, Sterile

Individual

50

229503

4 Well Non-treated Plate with Lid, Individual, Sterile

Individual

50

229506

6 Well Non-treated Plate with Lid, Individual, Sterile

Individual, 50/Pack

100

667512

12 Well Non-treated Plate with Lid, Individual, Sterile

Individual, 50/Pack

100

229524

24 Well Non-treated Plate with Lid, Individual, Sterile

Individual, 50/Pack

100

229548

48 Well Non-treated Plate with Lid, Individual, Sterile

Individual, 50/Pack

100

229590

96 Well Non-treated Plate, Round Bottom with Lid, Individual, Sterile

Individual, 50/Pack

100

229596

96 Well Non-treated Plate with Lid, Individual, Sterile

Individual, 50/Pack

100

229538

384 Well Non-Treated Plate with Lid, Individual, Sterile

Individual

50

 
Item#:
ASMULTIPLTSUT

Petri (Non-treated Cell Culture Dishes)

  • Cell Culture Dishes are available in Tissue Culture Treated and Non-treated Cell Culture versions
  • Petri (Non-treated Cell Culture Dishes) have thicker and more durable plastic than standard Petri Dishes  both can be used for the same applications
  • 60, 70 and 100mm dishes available with a pronounced grip ring for improved handling
  • Vented lids contain molded spacers to allow gas exchange


 

Part Number

Product Description

Pack Description

Qty/Case

229638

35mm x 10mm Petri Dish, Sterile

10/Bag

960

229663

60mm x 15mm Petri Dish w/Grip Ring, Sterile

10/Bag

500

229692

100mm x 15mm Petri Dish w/Grip Ring, Sterile

10/Bag

300

229693

100mm x 15mm Petri Dish w/Grip Ring, Sterile

10/Bag

500

229623

100mm x 20mm Petri Dish w/Grip Ring, Sterile

10/Bag

300

229656

150mm x 15mm Petri Dish, Sterile

10/Bag

100

229653

150mm x 20mm Petri Dish, Sterile

5/Bag

100



 
Item#:
ASNTDISHES

Non-Treated Suspension Cell Culture Flasks

  • Non-treated Suspension Culture Versions
  • Uniform hydrophilic surface ideal for consistent cell attachment
  • Convenient zip-closure bag is a practical alternative to folding and taping open bags
  • Large opening, canted neck design and moderate angles allow easy access to entire flask surface; ideal for cell scrapers
  • Stable base enables filling with flask standing upright
  • Thick, durable walls
  • Flask is printed with lot number and expiration date for easy identification and tracking
  • Molded, interlocking T design for improved stacking on 75, 182, & 300cm2 and 250, 600 & 850mL size flasks
  • Vent caps feature 0.22µm hydrophobic membrane
  • 182cm2 flask offers more growth area than standard 175cm 2 flasks
  • 182cm2 Deep Volume Flask has extra depth, allowing more media volume; you can leave cell cultures to grow for longer without drying out or depleting all nutrients (maintain your cell cultures over the weekend)


Part Number

Product Description

Pack Description

Qty/Case

229500

25mL Suspension Culture Flask - Vent Cap, Sterile

10/Re-sealable Bag

200

229510

50mL Suspension Culture Flask - Vent Cap, Sterile

10/Re-sealable Bag

200

229520

250mL Suspension Culture Flask - Vent Cap, Sterile

5/Re-sealable Bag

100

229530

600mL Suspension Culture Flask - Vent Cap, Sterile

5/Re-sealable Bag

40

229540

850mL Suspension Culture Flask - Vent Cap, Sterile

3/Re-sealable Bag

18

Item#:
ASNONTSUSFLKS

Accuris SmartReader™ UV-Vis Microplate Reader
 
The Accuris SmartReader™ UV-Vis Microplate Reader (model MR9610) has been designed with ease-of-use and fast results in mind. This instrument brings extensive capabilities to the lab bench and is designed for the busy lab with multiple users. The large touch screen command center is extremely user-friendly and allows for fast set up of new protocols, as well as modifying and running existing protocols.

  • Intuitive, 10-inch color touch screen control panel
  • Accepts both 96 & 384-well plates
  • Monochromator-based system
    • No filters required
    • Wavelength range from 200 to 1000 nm
  • Stand-alone design
    • No PC or special software required
    • USB port for flash drive data transfer


Monochromator technology … no filters needed

The monochromator-based optical system allows for precise selection of wavelengths from 200nm to 1000nm, with no filters required. This range makes the SmartReader UV-Vis™ useful not only for typical ELISA , Bradford Lowry, and turbidity assays but also for more advanced applications such as quantitation of nucleic acids and proteins. The SmartReader™ UV-Vis can be set for Endpoint, Kinetic and Spectral Scanning assays.

High Throughput Capability

The MR9610 is designed for efficient processing of multiple samples and
accepts standard 96 well plates as well as 384 well plates for high density
screening. The plate layout interface allows for a quick and intuitive setup of a plate well’s contents. Users can highlight and label multiple wells to save time. The display shows a graphical representation of the plate. Users can label each well as required for: “known standard”, “unknown sample”, “blank well” , “QC Control well”, “positive control”, “negative control”, and “empty”.

Optimized results with plate shaking and incubation

Controllable plate shaking and incubation allow for optimization of assay results. The shaking speed can be controlled at different intensities with options for timed and pulsed shaking before a reading, or in between readings when performing a kinetic assay. The linear motion efficiently and uniformly mixes all samples in both 96 and 384 well plates. Temperature can be controlled from ambient +5C up to 45C, allowing for the processing of enzyme kinetics, and bacterial growth assays.”


SmartDrop™ Accessory Plate

Absorbance measurements of exceptionally small volumes (<0.5ul) can be achieved using the SmartDrop™ Accessory Plate. The SmartDrop™ plate accommodates up to 16 samples and is ideal for checking nucleic acid concentrations and purity for Next Gen Sequencing, or protein concentrations.


 
 SmartReader™ UV-Vis Microplate Reader Specifications

Model

Accuris SmartReader™ UV-Vis

Plates Accepted

96-well and 384-well flat bottom

 Display

10-inch color touch screen

Controls

Touch screen and mouse

Light Source

Xenon Flash Lamp

Wavelength range

 200-1000nm

Wavelength Precision

± 2 nm

Wavelength Accuracy

 ± 2 nm

Wavelength selection

Monochromator

Read-out range

0 – 4.0 OD

Detector

Dual silicon photoelectric detectors for measurement and reference

Linearity  @ 450nm

R2 ≥ 0.999, [0.0 – 3.0]

Accuracy  @ 450nm

1.0% + 0.003 Abs (0 – 2.0]
2.0% (2.0 – 2.5 Abs]

Precision@450nm

CV < 0.5% or SD<0.003 (Precision mode); CV < 1.0% (Fast mode)

Stability@450nm

< 0.005A , (0.0 – 2.0]
< 2%   (2.0 – 2.5 Abs)

Measurement speed

96 well plate:  <6 seconds (fast mode); <25 seconds (precision mode)
384 well plate: <74 seconds (only precision mode available for 384)

Plate shaking

Linear; three levels of shaking speed

Incubator

From ambient + 5°C to 45°C

Temperature Uniformity

± 0.5°C @ 37°C

Storage

16G memory, more than 10,000 test records can be stored

Connection Ports

3 USB ports, for PC, printer and USB-flash drive

Power supply

DC24V  6.5A

Dimensions (WxDxH)

300 x 500 x 260mm | 11.8 x 19.7 x 10.25 inches

Weight

15.5kg | 34 Lbs


Ideal for rapid, accurate counts.

The all-in-one eCount combines a multifunction electronic counter with a Sharpie® pen for marking petri dishes to prevent missing or double-counting colonies. Light, ergonomic body is balanced for easy manipulation. Touch controls for multiple counts, sums, counting up or down, and more! Includes fine-point Sharpie® pen and weighted stand. 

Item#:
HS15092A
Your Price:
243.00
Each
This item is discontinued

Disposable Spreaders

  • Spread cultures and liquids evenly
  • Smooth-edges – minimize “gouging”
  • 3 configurations: “L”, “T”, or Triangle
  • Ideal for bacterial CFU Counts
  • Pre-sterilized – no flaming required

All versions are supplied in sterile packaging, but are also autoclavable and have smooth, rounded edges to prevent unwanted cutting, scraping or gouging of agar during inoculation.  

L-Shape: 

The original spreaders are ideal for spreading bacteriological cultures evenly. The shape allows the user to rotate and apply easily throughout an entire round plate or dish. They are made of ABS and have a slight upward curve at the edge to prevent dragging or scraping.  


T-Shape:

This shape ensures that consistently even pressure can be applied across the entire span of the 34 mm spreading surface. Designed for spreading and dispersing liquids across the surface of agar culture plates, they are made of ABS and commonly used for CFU plate counts on water, milk, urine, etc.  

 

Triangle Shape:

This new design is also used for CFU count applications, but has a grooved handle that improves grip and orientation. Made of polypropylene, they are available with a 30 mm span or an extra large 60 mm span.

Item#:
ASBACSPREAD1

Sterile Disposable Inoculating Loops & Needles

These sterile disposable plastic loops and needles are designed for use in quantitative procedures such as sampling, urine counts and serial dilutions, as well as for bacterial inoculation. Because they are pre-sterilized and designed for single use, there is no risk of cross contamination and no need for flaming. They are flexible enough for streaking, yet rigid enough for subsurface inoculation.

The unique hexagonal shape of the shaft makes it easier to grip, orientate and guide through a smooth streaking process. The loop surfaces are extremely smooth with no rough edges and no flashing or burrs on the loop head. This results in the elimination of cutting or gouging of the agar surface.

Sterile, disposable and verifiably accurate, these loops provide an efficient, cost-effective and time-saving alternative to traditional metallic loops.

 
   
 
 
 
   
Item#:
ASSTERILEDILOONEED
  • Pressure-sensitive counting
  • Average count facility
  • Bright white energy saving LED lighting
  • With BioCote antimicrobial protection
  • Audible confirmation
  • Choice of light or dark background
  • Connectivity to printer or computer


Touch pressure with felt tip marker on petri dish registers cumulative count on the digital display with confirmation by audible tone (can be turned on or off). The pressure required to register a count can be adjusted to suit each user. Averaging facility calculates average count over multiple plates. Counting results as well as useful statistics including SD can be sent directly to the accessory printer or to a computer via a USB cable supplied.

Sub-stage illumination by low energy bright LED's allows glare-free optimum viewing. A switchable black background is provided to enhance viewing of translucent and difficult to see colonies. Supplied with a Wolffhuegel graticule, segmentation dish and dish centering adapters to facilitate use with 50mm to 90mm dishes. A choice of magnifiers and a printer are available as optional accessories.

 

Technical Specifications

Lighting White LED array
Digital display 3 digit LED
Count 0 to 999
Dimensions (w x d x h), in. 12 x 12 x 5.5"
Mass, lbs 3.3
Electrical supply 120 to 230V, 50 / 60Hz, 70W
Item#:
SC6PLUS
Your Price:
844.63
Each

Our Inoculating Loops and Needles are smooth and flexible to facilitate uniform, smooth streaking without damage to media/gel surfaces. The needles are straight and suitable for removal of single colony specimens. The loops are extra-smooth and constructed of polypropylene and rubber. Both the loops and needles are packed sterile in safe, tamper-proof, zip-seal resealable bags. Cross contamination due to improper sterilization is eliminated. They can be used under hoods without danger, are color coded for ease of size identification, and are extra long to reduce the risk of contamination. Certificate of conformity is available upon request.

Total Length: 22.7cm (9)

Item#:
ASLOOPS4
View: