Capp Rondo Plate Shaker

Benchmixer™ XL Multi-Tube Vortexer

• Hands-free, high-capacity vortexing
• Up to 2500rpm, a true vortex in every tube
• Assortment of accessories for a variety of tubes, flasks & plates
• Pulsing program for interval mixing
• Fits almost any tube rack

The Benchmixer™ XL is a heavy-duty vortex mixer designed to facilitate hands-free mixing in tubes, flasks, vials, or cylinders. It is ideal for the QuEChERS pesticide analysis method and is instantly adaptable to a broad range of vessels and racks. The precisely balanced drive system includes an oversized motor that delivers accurate, reproducible speeds up to 2500 rpm with rattle-free operation and minimal vibration. The programmable pulsing function allows for time-specific interval mixing and increasing agitation.

The 7 x 12 inch platform accommodates a wide variety of standard, pre-drilled tube racks and can be easily adapted to almost any type of vessel commonly found in the laboratory.
Using BenchMixer™ XL is easy-after loading the sample rack and tightening the locking knobs, select the desired speed and run time on the large digital control panel, then press Start. The BenchMIxer™ XL can run unattended for up to 100 hours.
 
BenchMixer™ XL's large capacity and adaptability make it an ideal choice for the medium to high throughput laboratory.

Specifications

Speed Range	500 to 2,500 rpm
Max Capacity	6 X 250 mL
Orbit	3.6 mm
Timer	1 min. to 99 hr 59 min.
Platform Dimensions	12 X 7 in | 30 X 17.8 cm
Exterior Dimensions	15 X 9.2 X 16.5 in 38.5 X 23.5 X 42 cm
Operating Temp. Range	4 °C to 65 ° C
Weight	13 kg/29 lbs
Electrical	100 to 240 V, 50/60 Hz
Warranty	2 years

 

Item #	Description
BV1010-05	Tube Rack, 96 x 0.5 mL (8 mm)
BV1010-1520	Tube Rack, 96 x 1.5/2.0 mL (10 mm)
BV1010-12	Tube Rack, 50 x 12 mm (included)
BV1010-13	Tube Rack, 50 x 13 mm
BV1010-150	Tube Rack, 50 x 15 mL (16.58 mm)
BV1010-500	Tube Rack, 15 x 50 mL (29 mm)
BV1010-25	Tube Rack, 15 x 25 mm
BV1010-50H	Tube Rack, 9 x 50 mL Horizontal (QuEChERS method)
BV1010-V50	Tube Rack, 6 x 50 mL Volumetric Flask
BV1010-V125	Tube Rack, 6 x 125 mL Volumetric Flask
BV1010-V250	Tube Rack, 6 x 250 mL Volumetric Flask
BV1010-MP	Rack for up to 3 Microplates or 96-well Micro Tube Racks
BV1010-MP02	Carrier for above, 96 x 0.2 mL Tubes or Strips (3pk)

 

LabDoctor^™ is being discontinued. These items are on clearance for your benefit!  

If you would like to purchase other available Mini Vortex Mixers please visit this Mini Vortex Mixers page Or check out our PR1MA™ Mini Vortexer

Valid while supplies last.

Not to be combined with any offers or discounts. No institutional pricing. All terms apply.

LabDoctor™ Mini Mixer

The Mini vortex mixer is the ideal vortex mixer for every lab with its compact size, ease of use, and its economic price point. The 3,000 rpm fixed speed ensures there is no sacrificing any mixing power.

• Extremely compact and easy operation.
• Powerful vortexing for tubes up to 30 mm.
• The head is made of durable material to ensure a long life.
• The refined steel base is designed to ensure product stability.
• Choice of different colored working heads.

Specifications
 

Speed	3000rpm
Speed Accuracy	± 10%
Oscillation Mode	Circumference Oscillation
Orbital Diameter	Ø4.5 mm (Ø0.18 in.)
Capacity	Max. 80 mL
Max Tube Diameter	≤Ø30 mm (≤Ø1.2 in.)
Ambient Temperature	5~40°C
Power Supply	AC100V-240V / 50Hz-60Hz
Maximum Power	5W
Outside Dimensions (xH)	96x85mm
Weight	0.6 kg (1.2 lb)
IP rating (DIN EN 60529)	IP40

 

• Continuously variable speed for gentle mixing or vigorous vortexing
• Optimized counter balance for minimal vibration
• Touch or continuous operation
• Multiple attachment options
• 1 year warranty

Labnet's new variable speed Vortex Mixer VX-200 provides fast, efficient mixing with minimal vibration. The unit features a true circular orbit that allows for even distribution of vortexing across the entire speed range. The CombiCup® head, supplied with the unit, accepts many different tube sizes. A full range of accessories is available to accommodate most common laboratory tubes and plates.

Multi-Therm™ Shaker

• Two models available: Heat only and Heat/Cool
• Interchangeable blocks for tubes 0.2 mL to 50 mL
• Precision contoured wells for uniform heat transfer

The MultiTherm™ Shaker is a temperature-controlled vortexer useful for a variety of molecular biology applications. Despite its modest 8 x 11 in. footprint, all popular tubes and plates are compatible, including as many as six 50 mL tubes. Speed, time, and temperature settings are continuously visible on the LCD, simultaneously showing both actual and selected values. Integral over-temperature control ensures long life, safety, and sample integrity.

Specifications

• Shake and incubate samples simultaneously
• Complete with platforms for tubes and plates
• Intelligent control
• Broad temperature and speed range

Designed for simultaneous heating and mixing of small samples, the VorTemp 56 features interchangeable platforms for microtubes and microplates. Both platforms are supplied with the unit. Temperature in the VorTemp 56 is adjustable over a broad range, making the unit useful for a variety of applications, including bacterial cultures in tubes and microplates. Mechanical convection provides a uniform and stable environment within the chamber. The VorTemp 56 may also be used in the cold room for subambient applications.

Shaking speed as well as acceleration rates are adjustable. Acceleration can be set to three different levels to protect delicate samples.

A microprocessor controls all parameters including temperature and timed operation. Self-diagnostic software continuously monitors the unit for proper temperature and shaking speed, alerting the user to any errors. Heating and shaking are controlled by feedback loops which precisely maintain chosen parameters, independent of load or voltage fluctuations.

The sturdy construction of the VorTemp 56 gives it stability during high speed shaking. The chamber is insulated to maintain temperature and reduce operating noise.

• Large capacity - process 60 microtubes or 4 microplates
• Resuspending, homogenizing, mixing or vortexing
• Sturdy, compact construction
• Suitable for cold room or incubator use
The smallest of the Orbit digital shakers, the M60, P2 and P4 feature variable speed across a broad range, making them useful for a variety of applications. Both time of operation and shaker speed are set and displayed digitally, with their values shown on the large 3 digit LED. Parameters are selected with an easy turn knob. A sturdy base encloses the motor for quiet, vibration free operation. All three models can be used in temperature controlled environments. Their compact size makes them ideal for incubator use.

Orbit P2 Orbit M60 Despite its small size, the Orbit M60 can process up to 60 microtubes at one time. The platform is removable to function as a transfer rack or workstation. 1.5/2.0 ml tubes are accommodated directly while smaller tubes can be used with adapters, sold separately.

Orbit P2 and Orbit P4 These vortexers accept all sizes of standard microplates, including deep well plates. Retaining springs on the contoured steel platform hold samples in place. The Orbit P2 holds two microplates while the Orbit P4 holds four.

Product Specifications
Speed range	100 - 1400rpm
Timer	0 to 99 minutes or continuous
Motion/orbit size	Horizontaly circular, 3mm
Maximum capacity	M60: 60 x 1.5/2.0 ml microtubes
Maximum load	0.66 lb/0.3kg
Ambient operating range	+4° to 65°C
Dimensions (W x D x H)	6.6 x 11 x 6 inches/16.8 x 27.9 x 15.3 cm
Weight	9.5 lb/4.3 kg
Electrical*	120V~, 60 Hz
*Other voltages available upon request

Grant-bio V-32 Vortex Mixer

• Handles up to 32 tubes in three different sizes/combinations
• Additional VP-1 flat head for single tube mixing supplied with unit
• Compact rugged design plus powerful motor delivering consistent performance and quiet operation - fits neatly and unobtrusively into the workspace
• Rubber suction pads hold tight to the work surface and prevent the unit from "walking" - they also absorb vibration and prevent its transmission to the workbench
• Extremely easy to operate - select either "continuous" or "touch" operation and turn the knob to adjust the speed from 500 rpm to 3000 rpm
• The 32-socket universal platform for three tubes sizes (16 x 1.5ml, 8 x 0.5 ml, 8 x 0.2ml) and a tip for mixing individual tubes up to 15ml provide maximum flexibility for different applications.
• Operating temperature range: + 4°C to 40°C

The Grant bio V-32 is a versatile multi-vortex mixer for vigorous re-suspension of cells or chemical pellets in tubes up to 1.5 ml, with the facility to mix individual tubes up to 15 mL.

Applications
Typical applications include intensive stirring of bacterial and yeast cells, extraction of metabolites and enzymes from cells and cell cultures, and various DNA operations such as deproteinization of DNA/protein complexes and purification of low molecular weight DNA/RNA fragments in PCR diagnostics.

Specifications

BenchMate VM-D Digital Vortex Mixer

• Adjustable speed from 300 to 4,200 rpm
• Digital display - Shows speed and time alternately every 5 secs
• Unique programmable pulse mode function
• An orbital diameter of 4 mm
• Can be used in fume hoods and cold rooms

The Oxford Lab Products BenchMate VM-D Digital Vortex Mixer is one of the most powerful vortex mixers on the market with a 4,200 rpm max speed. The BenchMate VM-D Digital Vortex Mixer also comes with a pulse mode programming feature, allowing scientists to complete more complex and aggressive mixing with one unit. The speed range of this vortex mixer, from 300 rpm to 4,200 rpm, allows for gentle to vigorous mixing.

The BenchMate VM-D has a built-in counterbalance for smooth operation and a three-way switch - touch activate, standby and continuously active - with a status indicator LED. This vortexing unit has a timer setting from 1 to 999 mins. It has optional vortex mixer attachments for microtubes, a microplate or a beaker.

This vortexer has a digital display that shows speed and time alternately every 5 secs. The vortex mixer has user enabled run time and off time settings. The unit has an orbital diameter of 4 mm for optimal vortexing. It can be used in fume hoods and cold rooms for added convenience. Each attachment has a sticker indicator for permissible speed for that attachment.

• Shake and incubate samples simultaneously
• Interchangeable platforms for tubes and plates
• Fine-tune Speed Control
• Rapid heating and cooling

AccuTherm is a temperature controlled vortexer that uses peltier technology to rapidly heat and cool precious samples. The combination of heating/cooling with mixing makes the AccuTherm ideal for many life science research applications in the fields of molecular biology, biochemistry and clinical chemistry.

Eight interchangeable aluminum blocks accommodate PCR plates and tubes ranging in size from 0.2mL to 15mL. Designed to meet the high-paced demands of today's lab, the exceptional performance of this product make it an essential part of your daily research.

Inquire about additional accessories:
1-4000-A, 1-4000-B, 1-4000-C, 1-4000-D, 1-4000-E, 1-4000-G, 1-4000-H, 1-4000-J

• Shake and incubate samples simultaneously
• Complete with shaking racks for 15ml and 50ml conical tubes
• Intelligent, digital control
• Broad temperature and speed range

Designed for simultaneous heating and mixing of small samples, the VorTemp 1550 is supplied with interchangeable platforms for standard 15ml and 50ml conical tubes. Maximum capacity is 8 x 50mL or 18 x 15mL. Temperature in the VorTemp 1550 is adjustable over a broad range, making the unit useful for a variety of applications, including bacterial cultures and digestions. Mechanical convection provides a uniform and stable environment within the chamber. The VorTemp 1550 may also be used in the cold room for subambient applications.

Shaking speed as well as acceleration rates are adjustable. Acceleration can be set to three different levels to protect delicate samples.

A microprocessor controls all parameters including temperature and timed operation. Self-diagnostic software continuously monitors the unit for proper temperature and shaking speed, alerting the user to any errors. Heating and shaking are controlled by feedback loops which precisely maintain chosen parameters, independent of load or voltage fluctuations.

The sturdy construction of the VorTemp 1550 gives it stability during high speed shaking. The chamber is insulated to maintain temperature and reduce operating noise.