PR1MA™ Vortex Mixer with Multi-Head™

• A traditional cup head for general-purpose mixing of conical tubes plus it holds up to 8 microcentrifuge tubes
• Powerful motor for instant vortexing
• Continuous or "touch" operation
• Increased vortexing speed up to 3,400 rpm
• Q-Drive™ technology provides smooth vortexing action

The PR1MA™ Vortex Mixer is MORE than your standard vortex mixer. The unique design of the Multi-Head™ (included) features a traditional cup head for general-purpose mixing, plus holds up to eight microcentrifuge tubes.

The drive system is balanced with Q-Drive™ technology, providing a smooth vortexing action, while minimizing noise and excessive vibration. This results in quieter, more efficient, and longer lasting operation. Increased speed, up to 3,400 rpm produces an instant vortex of even the largest sample sizes, including full 50 mL tubes.

Other features include: “no-walk” suction feet, cold room/incubator compatibility, and spill-proof electronic controls.
 
 

Specifications
 

Speed Range	200 to 3,400 rpm
Operating Modes	Touch or Continuous
Operating Temperature Range	+4°C to +65°C
Dimensions	5 x 6.3 x 6.7 in.
Weight	8.4 lb | 3.8 kg
Electrical	115V AC, 60 Hz, 1.5A
	230V AC, 50 Hz, 0.75A
	230V AC, 60 Hz, 0.75A
Warranty	2 years

 
 
Accessories

Item #	Description
BV1000-FLAT	Vortexer Flat head
BV1000-COMBO	COMBO™  head
BV1000-H15	Horizontal head, for 12 x 1.5 mL
BV1000-H150	Horizontal head, for 4 x 15 mL
BV1000-H500	Horizontal head, for 2 x 50 mL

  

PR1MA™ Vortex Mixer

• Powerful motor for INSTANT vortexing
• Continuous or “touch” operation
• Q-Drive™ dynamic balancing system
• Variable speed from 200 to 3200 rpm
• Wide variety of accessories

The PR1MA™ Vortex Mixer sets the new standard in vortex mixing. With advanced Q-Drive™ technology, the PR1MA™ Vortex Mixer provides smooth instant vortexing of even the largest sample sizes, including full 50 mL tubes. The unique counter-balance system creates maximum vortexing action while minimizing noise and excessive vibration. This results in quieter, more efficient, and longer-lasting operation.

Other features include “no-walk” suction feet, cold room/incubator compatibility, and spill-proof electronic controls.

Specifications

PR1MA™ Orbital Microplate Shaker

• Digital speed control up to 1500 rpm
• 3 mm orbit for thorough mixing in microplates
• Includes platform for up to 4 microplates
• Cold room and incubator safe
• Optional adapters for mixing microtubes 

The PR1MA™ Orbital Microplate Shaker is designed with a 3 mm mixing orbit, optimized for thorough mixing of microplates and/or PCR plates. Up to four plates (standard or deep well) can be placed on the included platform and are instantly secured without the use of springs, clamps, or tools.

Specifications

• Redesigned to accept two 1 L Flasks
• Increased temperature control up to 70°C 
• Instant clamp exchange with MAGic Clamp system
• Only 11 inches wide
• 2 year warranty 

The PR1MA™ Mini Incubated Shaker is the most compact shaking incubator in its class. Despite the remarkably small footprint, a large 11.5 x 9.5 In. work space accepts several platforms for use with a variety of vessels.

The standard platform (included) features a non-slip rubber-coated surface ideal for TC flasks, petri dishes, and staining trays.

The convenient MAGic CLAMP™ Platform is also available for use with Erlenmeyer flasks and test tube racks. The unique, magnetic attachment method is the easiest way to instantly change between flask clamps of different sizes.

Specifications
 

IS-300 Platforms and Accessories
 

PR1MA™ Orbi-Shaker (LG)

• High capacity, up to 9 x 500 mL, 5 x 1 L or 2 x 2 L
• Horizontally circular 19mm orbit for aeration & mixing
• Digital speed control up to 300 rpm
• Instantly exchange flask clamps with MAGic Clamp™ accessories (PATENTED)

The powerful PR1MA™ Orbi-Shaker is capable of mixing a 14 Lb load capacity up to speeds as high as 300 rpm. The standard platform (included) features a non-slip, rubber-coated surface, ideal for tissue culture flasks, Petri dishes, and staining trays.

The convenient MAGic Clamp™ platform (PATENT PENDING) is also available for use with Erlenmeyer flasks and test tube racks. The unique, magnetic attachment method (PATENTED) is the easiest way to instantly change between flask clamps of different sizes.

Specifications 

12 Days of Holiday Cheer are here—unwrap amazing deals on lab supplies and equipment!

 

For a limited time, buy a two-pack of our Red PR1MA™ Mini Vortexer (VM1-R-2PK) for over 20% off! 

Compact yet powerful, this mini vortexer handles up to 50 mL tubes with ease, all while saving valuable bench space.

 

Don’t miss out—grab this deal before it’s gone!

 

Use promo code 12DAYSXMAS24

Free offers require the purchase of designated items at the listed price. Offers are valid until 12/31/2024 or while supplies last.
Not valid on previous purchases. Special price applies only to the item specified. Other capacities or items cannot be substituted.
All terms and conditions apply.

PR1MA™ Mini Vortexer

• Powerful vortexing for tubes up to 50 mL
• Pressure activated operation
• "Mini-sized", less than 4 inches wide

Powerful is the best word to describe the PR1MA™ Mini Vortexer. With a 4 mm orbit and fixed speed of 2,800 rpm, it instantly vortexes even the largest samples, including nearly full 50 mL tubes. Despite its powerful motor, the Mini Vortexer has a footprint of less than 4 x 4 inches, allowing it to fit on even the most crowded lab bench.

Pressure-activated operation means that the motor is automatically activated with slight pressure on the center cup head. Operation is smooth, quiet, and efficient. When pressure is removed operation immediately ceases. The unique design prevents liquids from entering the housing, prolonging motor life.

Specifications
 

Speed	2,800 rpm
Orbit	4 mm
Motor Activation	Pressure activation
Dimensions (W x D x H)	3.7 x 3.9 x 2.6 in.
Weight	1 lb.
Electrical	Universal voltage, 100-240 V, 50-60 Hz, 0.7 A
Warranty	2 years
Operating Temp.	+4 to 45°C

 

PR1MA™ V2 Vortex Mixer

• Reversible top platform, cup, or flat-dimpled surface
• Powerful motor for INSTANT vortexing
• Continuous or touch operation
• Q Drive dynamic balancing system
• Variable speed from 200 to 3200 rpm
• Wide variety of accessories, for tubes up to 50 mL

The PR1MA™ V2 Vortex Mixer utilizes a smooth and powerful mixing technology, with the advantage of a uniquely designed reversible rubber head that can be attached to the mixer in two orientations. For the vortexing of single tubes, the cupped surface would generally be preferred. However, for applications requiring a flat/dimpled surface for mixing uniquely shaped vessels (or a handful of multiple test tubes), the head can easily be flipped over and reattached in reverse orientation.

The drive system is balanced with Q-Drive™ technology, providing a smooth vortexing action, while minimizing noise and excessive vibration. This results in quieter, more efficient, and longer lasting operation. With a maximum speed up to 3,200 rpm, the mixer provides an instant vortex of even the largest sample sizes, including full 50 mL tubes.

Specifications

PR1MA™ Orbi-Shaker™ Small 

• Digital speed control up to 300 rpm
• Horizontally circular 19 mm orbit for aeration & mixing
• Extremely compact, perfect for low to medium capacity applications
• Instantly exchange flask clamps with MAGic Clamp™ accessories

The PR1MA™ Orbi-Shaker™ Small is designed for smaller capacity applications and laboratories where bench space is at a premium. The shaker includes a 9.5 x 8" platform that mixes at a 19 mm orbit, perfect for thorough mixing and aeration in Erlenmeyer flasks.

An optional MAGic Clamp™ platform is available for use with Erlenmeyer flasks and test tube racks. The unique magnetic attachment method is the easiest way to instantly change between flask clamps of different sizes. (PATENTED)

Specifications

PR1MA™ 3D Nutating Shaker with Variable Speed

• Adjustable speed & tilt for a wide range of applications
• Large 12 x 12 in. work surface
• Insta-TILT™ technology for instant adjustment to the tilt angle
• Dual platform accessory doubles work surface
• Cold room and incubator safe

The PR1MA™ 3D is designed to provide the precise speeds and tilt angles required for a broad range of molecular and biological mixing applications. The user can adjust both parameters to match the vessel size and the volume of liquid being mixed, yielding optimum results.
This model includes both flat and dimpled (autoclavable) mats for mixing a wide variety of tubes and other vessels.

Stacking platforms can be purchased as accessories, effectively doubling the usable surface area of each model. PR1MA™ 3D features a maintenance-free, brushless motor, capable of loads up to 4.4 lbs, and is safe for use in cold rooms and incubators.

Specifications 

Benchmark™ INCU-SHAKER™ 10 L 

• Large platform 18 x 18 in., up to 5 x 2 L
• TOUCH screen control over time, speed and temperature
• Exceptional temperature uniformity
• Horizontally circular 19 mm orbit for aeration & mixing
• Instantly change flask clamps with MAGic Clamp™ accessories
• Optional shelf for Petri dishes, microplates, etc.
• Incu-Shaker 10LR (Refrigerated) for temperatures down to RT -15°C

The Incu-Shaker™ 10L provides digitally regulated temperature with orbital mixing optimized for culturing a variety of types of cells. The standard platform (included) features a non-slip rubber coated surface ideal for TC flasks, petri dishes, and staining trays. The convenient MAGic CLAMP™ Platform is also available for use with Erlenmeyer flasks and test tube racks. The unique, magnetic attachment method is the easiest way to instantly change between flask clamps of different sizes.
 

Features a Touch Screen with 3 Control Views:

Standard View

Advanced Temperature View

Advanced Shaker View

Specifications

Available Platforms for IS-1010 Incu-Shaker 

Flask Clamp Capacities

Benchmark™ MultiTherm™ Shaker Touch

• Large touch screen for simple and easy programming and viewing of status
• Advanced programming features include adjustable ramp rates, preheat, and clockwise/counterclockwise mixing
• Multiple block options for plates and tubes up to 50ml
• Broad temperature and speed range to meet a variety of applications

Like the popular MultiTherm, the MultiTherm Touch features a broad temperature range to meet applications from denaturation of DNA to keeping samples cold (4°C) at the end of a protocol. An expanded speed range (to 3,000rpm), full-color touch screen, greater flexibility in programming, and heated lid option set this new unit apart.

Specifications