BlotBoy™ Low Speed 3D Rockers 

• Optimized speed and tilt for gel blotting, washing & staining
• Tri-directional motion for thorough, gentle mixing
• Optional stacking platforms are available
• Cold room and incubator safe

Specifications
 

Speed Range		Fixed; 12 rpm (230V: 20 rpm)
Tilt Angle		Fixed; +/- 8°
Platform Size	R3D-710	10.5 x 7.5 in.
	R3D-1212	12 x 12 in.
Load Capacity		4 lbs (1.8kg)
Operating Temp. Range		+4°C to +50°C
Dimensions (in/cm)	R3D-710	10.5 x 7.5 x 8 in. / 27 x 19 x 20 cm
	R3D-1212	12 x 12 x 8 in. / 30 x 30 x 20 cm
Weight		4.4 lbs (2kg)
Electrical		115 or 230V 50-60Hz; 50W
Warranty		2 years

 

• Optimized for blot washing and gel staining
• Gentle mixing, 12 rpm/ ±8° tilt
• Dual platform accessory doubles work surface
• Cold room and incubator safe

The BenchBlotter is an economical "workhorse" rocker, designed for common molecular lab applications such as blotting, staining/destaining, etc. There are no complicated controls, no settings or adjustments to be made, just press and power switch and start rocking.

Specifications 

• Adjustable tilt and speed for exact level of agitation
• Safe for incubator and cold room use
• Durable construction
• Double platform option expands usable space
• 1 year warranty

MIDSCI's ProBlot 35 Deluxe Rocker is made for those laboratories requiring a larger platform area and precise control over rocking parameters.

Both speed and degree of tilt are adjustable across a broad range to provide the exact level of agitation required for all types of samples. The rocker is equipped with a 2 hour timer that can also be set for continuous operation.

The heavy duty motor and sturdy rocking platform can support loads of up to 10 pounds. Closed loop, solid state speed control ensures that the rocker operates at constant speed regardless of voltage or load fluctuations. Permanently lubricated ball bearings provide years of maintenance-free operation.

The ProBlot 35 Deluxe Rocker is available with a single platform, or for added workspace, two stacked platforms. Each platform is covered with a nonslip rubber mat to keep sample containers in place. The rocker can be used in environments from 4° to 65°C, making it safe for cold room or incubator use.

Efficient 3D Lab Shakers
The three-dimensional shaking motion of the GyroTwister GX-1000 is extremely efficient, yet gentle, making this shaker ideal for general mixing as well as staining gels, hybridization and other applications. Shaking speed is continuously adjustable across a broad range. A nonslip rubber mat and elastic tie-downs hold samples in place during operation. A dimpled mat is included for holding tubes in place. Larger platforms and a stacked standard platform configuration are available to increase shaker capacity.
GyroTwister 3D Shaker Product Features Include:

• Gyratory action provides gentle yet thorough mixing
• Hybridization, staining gels, immuno-staining and general mixing
• Safe for use in temperature-controlled environments
• Double platform and larger platforms available

Permanently lubricated ball bearings on moving parts provide quiet, maintenance-free operation. The sturdy base lends stability to the unit. The GyroTwister 3D shaker is safe for use in temperature-controlled environments, up to 65°C. Standard 30 x 30 cm platform and tube mat are supplied with the shaker,

• Staining, hybridization, washing, etc.
• Compact size, low profile
• Extremely quiet
• Double platform option expands usable space
• 1 year warranty

The Labnet Economy Rockers, ProBlot 25 and 25XL, are basic rocking platforms that have been designed for a long life and trouble-free service.

Rocker speed is adjustable to provide the gentle motion required for staining fragile gels as well as the more vigorous action necessary for washing blots. The rocking movement is fixed at ±7°.

The platform surfaces are covered with nonslip rubber pads to prevent objects from moving during operation. Elastic tie downs are available to secure in place bags, boxes, tubes and other containers. The platform assemblies pivot on permanently lubricated ball bearings for quiet, maintenance-free operation. The ProBlot 25 platform measures 28.9 x 20.3 cm, while the ProBlot 25XL platform is slightly larger at 30 x 30 cm. For increasing the work area without sacrificing valuable bench space, a second platform can be stacked on the first.

The ProBlot 25 and 25XL Rockers can be used safely in temperature controlled environments up to 85°C. Their low profile and compact size make them perfect for use in small incubators.

• Ideal for mixing samples in blood and centrifuge tubes
• Fixed speed and pitch
• Safe for cold room use
• CSA compliant
• 1 year warranty

The GyroMini is a smaller version of our popular GyroTwister. Its small size makes it ideal for mixing samples in blood and centrifuge tubes.

Like the GyroTwister, the GyroMini combines the motions of an orbital shaker and a rocker to produce a three dimensional action. The result is a thorough yet gentle mixing without foaming. Both the speed and tilt angle of this small shaker are fixed to provide the optimal level of agitation for mixing samples in small containers.

The GyroMini is supplied with a dimpled mat for holdidng tubes firmly in place. For temperature sensitive samples, the GyroMini can be used in a cold room.

Specifications

The Hi/Lo Profile Rocker is designed for versatility on benchtops, in high humidity or dry incubators, in high temperature ovens (up to 65°C) and refrigerated units (up to 0°C).

Ideal for the following applications:

Staining and Destaining gels, Northern and Southern Hybridizations, Western Blotting and Rinsing Membranes, Cell Culture Incubation and Phage Elutions or Amplification of cDNA libraries.

The Hi/Lo Profile Rocker fits easily into laboratory incubators, ovens and/or refrigerated units without rearranging shelves or disturbing other materials. The platform tilt is continuously adjustable from 2 to 11 degrees. The variable speed control allows running this system from 0 t0 22 rpm. A maximum of 3 rocker platforms can be added to increase capacity when using the same amount of bench space.

Input Voltage: 115V
Platform size: 12x12 in. (30x30 cm)
Max RPM: 22
Max Load: 20lbs.

1 year warranty

Available platforms doubles, triples and even quadruples capacity.

• Simple plug & play operations
• Ridge pad design for easy stable tube placement
• Small size uses minimal bench space
• Accommodates tubes from 1.5 mL to 50 mL

The GTR-FS fixed-speed tube rocker is the best choice for basic laboratory tube mixing applications. With its see-saw motion, a fixed speed of 24rpm and an angle of +/-25° it provides optimal mixing. The ridged platform pad design allows the operator to place any tube from 1.5 mL to 50 mL on the unit.

The GTR-2-FS adds another tier for even more capacity.
 
 
Specifications 

Crystal Nutating Mixers, Rockers and Shakers

Combines the motions of an Orbital Shaker & Rocker for gentle yet thorough mixing.

• 3 dimensional nutating motion
• All models come with autoclavable mat
• Tilt angles are preset for 3D motion
• Automatic recovery from power outage
• Provides foam free mixing of samples
• Ideal for vials, tubes, bags, and flat vessels
• Gentle speed up and slow down
• Built for continuous use

Benchtop Incubated Shakers

Performance

• Temperature range:
• Ambient +5°C to 80°C for IST-3075 / 4075.
• Ambient -15°C (Min. 15) to 80°C for IST-3075R / 4075R.
• Competitive high shaking speed up to 500 rpm.
• Orbital shaking motion in 19mm diameter.
• Microprocessor PID control.
• Three-point temperature calibration / Automatic tuning.
• Wide speed range even with heavy workload.
• Equipped with a maintenance-free BLDC motor to generate smooth, quiet, uniform, and yet powerful shaking motion.
• Best effort run function intelligently manages its rpm to keep shaking even workload is out of its capacity.
• Automatic shaking speed adjustment in case of excessive workload such as unbalanced load placement, unusual vibrations caused from unstable floor or external shock.
• Pleasant test environment by the smooth acceleration and deceleration control.
• Smooth start and smooth stop function prevents chemical spills from flasks or test tubes.
• High-velocity fan ensures uniform temperature distribution and rapid thermal recovery after door open.
• Air-tight silicone door seal to provide excellent temperature uniformity

Convenience

• Intuitive touch screen LCD controller with easy icons and logical menus.
• Easy-set digital timer for shaking operation. (1 min. to 999 hr. 59 min.)
• Wide sample monitoring and convenient sample loading.
• Convenient sample monitoring without affecting inside environment thanks to the three-side transparent acryl lid with bright LED lamps.
• Gas spring lid supports providing smooth motion, soft opening and closing.
• Repetitive task can be easily performed as the platform stops where it starts.
• Stopping the shaking platform always at the same position is highly beneficial for automated dosing or sampling process.
• Corrosion resistance stainless steel interior.
• Built-in RS-232 port and USB port for external control and data collection.

Safety

• Automatic run after power interruption.
• Temperature and shaking speed deviation alarm.
• Over-current protection, Stalled platform check.
• Mechanical over-temperature protection device.
• Environment-friendly CFC-free refrigerant. (for IST-3075R / 4075R)
• Audible and visible open-door alarms.



• ITEM NO.	AAH23465U	AAH23565U	AAH23665U	AAH23765U
  MODEL NO.	IST-3075	IST-3075R	IST-4075	IST-4075R
  Temperature Range	Amb. +5 to 80°C /	Amb. -15 (Min. 15) to 80 /	Amb. +5 to 80°C /	Amb. -15 (Min. 15) to 80 /
  	Amb. +9 to 176°F	Amb. -27 (Min. 27) to 176	Amb. +9 to 176°F	Amb. -27 (Min. 27) to 176
  Temp. Fluctuation at 37°C in flask	± 0.1°C / 0.18°F
  Temp. Variation at 37°C in flask	± 0.5°C / 0.90°F
  Refrigerator (Hp)	-	1 / 6 HBP	-	1 / 6 HBP
  Motion type	Orbital
  Amplitude size (dia.)	19.1mm / 0.75in
  Speed range (RPM)	20 to 500rpm
  Accuracy	±1% of set speed (>100rpm) / ±1 (100rpm)
  Timer	1 min. to 999 hr 59 min.
  Max. load	10kg / 22lbs at 500 rpm		14kg / 30.9lbs at 500 rpm
  	15kg / 33.1lbs at 400 rpm		21kg / 46.3lbs at 400 rpm
  Volume	53L / 1.9 CuFt		83L / 2.9 CuFt
  Platform (W×D)	350×350mm / 13.8×13.8in		450×450mm / 17.7×17.7in
  Interior (W×D×H)	410×410×320mm / 16.1×16.1×12.6in		510×510×320mm / 20.1×20.1×12.6in
  Exterior (W×D×H)	440x785x510mm / 17.3x30.9x20.1in		540x 890 x510mm / 21.3x35x20.1in
  Net weight	65kg / 143.3lbs	73kg / 160.9lbs	81kg / 178.6lbs	90kg / 198.4lbs
  Electrical requirements (120V)	60Hz, 7.5A	60Hz, 10.1A	60Hz, 7.5A	60Hz, 10.1A