Home  >  PCR, Protein, RNA, DNA
|◀ ◀ 385 - 396 of 541 ▶ ▶|
View:
IB01010
6X Loading Dye

    • Used for agarose electrophoresis of DNA, RNA or nucleic acids
    • Contains 3 tracking dyes and 15% Ficoll in a special Tris dye
      • Light blue - around 4000bp in 1% agarose
      • Indigo - around 600bp in 1% agarose
      • Magenta - around 150bp in 1% agarose
    • DNase/RNase/Protease free

IB01015
5X RNA Gel Loading Kit

  • Reagents for denaturing and loading RNA samples onto a formaldehyde gel, using MOPS as a buffer
  • RNA sample is dissolved in 10µl of DEPC water and mixed with 35µl of denaturing solution. Heat the sample to 65°C for 5 min. Once the solution has cooled, add 5µl of loading dye. The sample is now ready to load into the gel.
  • DNase/RNase/Protease free

IB01190
2X Protein Loading Dye

    • Tracks the migration progression of your sample during polyacrylamide electrophoresis
    • Loading dye migrates independently of the samples, making it easier to estimate the migration of proteins
    • DNase/RNase/Protease free

IB72120
Xylene Cyanol FF

    • Used as a tracking dye at 5kb to monitor the progress of electrophoresis separation
    • CAS Number: 2650-17-1
    • DNase/RNase/Protease free

IB74040
Bromophenol Blue

  • Tracking dye in electrophoretic separations
  • Migrates around 0.5kb
  • CAS Number: 115-39-9
  • Purity: >98.0%
Item#:
ASGELLDDYES

RunBlue SDS Running Buffer (NXB50500) a TEO-Tricine buffer system which provides a separation similar to the MOPS buffer used with BIS-TRIS precast gels. It provides enhanced separation of higher molecular weight proteins. The buffer can be for reduced and non-reduced samples.

RunBlue TGS Blot Buffer(NXB82600) has been specially formulated to provide optimal blot transfer of proteins from RunBlue Precast Gels. Supplied as a concentrate should be diluted by a factor of 10 for use with the RunBlue Dual Run and Blot system or a factor of 20 for use with other blotting methods.

Item#:
ASPRECASTG
Polyolefin, 2.8 mil, Ultra-

These optically clear polyester films are ideally suited for Real Time PCR (qPCR). They feature an inert, ultra-clear, and strong encapsulated silicone adhesive that provides extraordinary performance in real-time PCR applications.

Encapsulated silicone greatly reduces the risk of sample contamination due to exposure to adhesive. Once the film is pressed onto the plate, the raised portion of the well penetrates the encapsulation and a tight seal is formed on just that surface (not over the sample). This silicone seal adheres aggressively and diminishes the possibility of "Edge Effect".

The plasticized backing of this film is scored on both ends to allow for two handed (precise) placement on the plate. Both film and adhesive maintain incredible clarity and are the choice for highly demanding manual and automated processes.

Certified free of RNase, DNase, Pyrogen, and nucleic-acid contamination.

Length

141.27 mm

Length (w/ end tabs removed)

117.5 mm

Width

77.8 mm

Overall Thickness

2.8 mil

Adhesive Thickness

2.0 mil

Material

Polyester

Adhesive

Encapsulated Silicone

Max. Temperature

120 °C

Min. Temperature

-40 °C

Primary Usages

Real Time PCR (qPCR), PCR
Item#:
MID-UC500
Your Price:
1114.00
Each
Storage Film

The polyester films are a great general purpose seal; ideal for sample protection and elimination of well-to-well sample cross contamination. The acrylic adhesive offers a strong bond that seals tightly on polypropylene and polystyrene plates.

This seal is ideally suited for short term storage, Elisa assays, prevention of sample loss, and general lab usage.

The paper backing of this film is scored on both ends to allow for two handed (precise) placement on the plate.

For PCR applications see our standard PCR film or our Real Time PCR film.

For applications where accessing samples through the seal with pipet tips or a probe is required, see the pierceable aluminum (MID-PCR-200) film.

Certified free of RNase, DNase, Pyrogen, and nucleic-acid contamination.

Length

146.05 mm

Length (w/ end tabs removed)

119.05 mm

Width

79.38 mm

Overall Thickness

3.1 mil

Adhesive Thickness

1.1 mil

Material

Polyester

Adhesive

Medical Grade Acrylic

Max. Temperature

120 °C

Min. Temperature

-40 °C

Primary Usages

Elisa, Storage or Sample Cover
Item#:
MID-PCR-TS
Your Price:
195.00
Each
This item is discontinued
Item#:
ASDEEPWELL384SQS
All racked tubes include rack lids

 

As of 06/26/23 The items below are being discontinued and will no longer be available when existing supplies are exhausted.

 

3910-545-000-9 | PurePlus® 1.2 mL Sample Library Tubes, Individual Tubes, in 96 Racks, Sterile
3911-545-000-9 | PurePlus® 1.2 mL Sample Library Tubes, In Strips of 8, in 96 Racks, Sterile
3912-545-000-9 | PurePlus® 1.2 mL Sample Library Tubes, In Strips of 12, in 96 Racks, Sterile
3913-855-000-9 | PurePlus® Cap Strips for 1.2 mL Sample Library Tube, In Strips of 8, Sterile

3914-845-000-9 | PurePlus® Cap Strips for 1.2 mL Sample Library Tube, In Strips of 12, Sterile

 

 

PurePlus® Sample Library Tubes

  • ATP, RNase/DNase, and Endotoxin Free (non-pyrogenic)
  • Freezable (-80°C)
  • Autoclavable (122°C, 15 minutes)
  • Made of polypropylene

PurePlus® Sample Library Tubes are designed for long-term specimen storage. Caps and tubes come in different packages. Separate closures strips are available. 96 tube format with printed alphanumeric grid and a clear lid.

 

Library tubes available as: Individual tubes, 8-well, and 12-well tube strips.
 
 

All racked tubes include rack lids. Tube closures are sold separately

 

Specifications 


MIDSCI #VWR #
3910-540-000-982006-698
3911-540-000-982006-700
3912-540-000-982006-702
3913-850-000-982006-694
3914-840-000-982006-696
3915-800-000-983009-678
3916-800-000-983009-680
3917-800-000-983009-683



 

Item#:
ASLABLIBTUBES
50/pk
  • Provides exceptional seal to safeguard samples during transport or storage
  • Eliminates well to well contamination and cross-over in PCR applications when used with Axygen's compression mat
  • Polypropylene film is wide temperature range compatible, -40° to 104°C
  • PCR-TS is designed for ELISA/EIA applications
  • CR-TS-900 is twice as thick (as PCR-TS) and is suitable for water-bath and other difficult PCR applications
Item#:
PCR-TS-900
Your Price:
149.61
Each

SILICONE SEALING MATS

    • Produced from the highest quality research grade silicone, they are specially designed to provide a positive and airtight seal. 
    • Mats fit tightly into wells preventing evaporation.
    • Pare well with automation as-well-as manual laboratory protocols. 
    • High quality silicone, resists coring and tearing reducing the risk or mat particulate entering the well. 
    • Well perforations will seal themselves, after penetration, ensuring an airtight closure.
    • Made of research-grade silicone, they can be autoclaved, and following a 10% bleach wash and ethanol rinse protocol may be reused.
    • Printed alpha numeric grid for easy reference.
    • RNase, DNase, DNA, and Pyrogen Free Certification
    • Temperature Range: -40C to 80C
Item#:
ASSEALMATS

Cytiva 3MM Chr paper is the world's most widely used blotting paper.

This acceptance and usage reflect the high quality, purity and consistency that are relied upon by researchers doing Southern, Northern and Western transfers. 3MM Chr paper is now available in the most widely used sizes. A medium thickness paper (0.34 mm) used extensively for blotting in electrophoresis for lifting of sequencing gels.

GB004
A thick gel blotting paper (1.0 mm), used for wicking purposes only. Provides higher absorbency and more consistent wicking than paper towels. Recommended for applications where fewer layers of gel blotting paper must still ensure a high capacity. Fewer layers of blotting paper reduce the risk of trapping air bubbles. Recommended for capillary blotting of nucleic acids.

GB005
An extra-thick (1.2 mm ), highly absorbent paper recommended for applications where fewer layers of blotting paper must siill ensure a high capacity. Recommended for semi-dry blotting of proteins.

17 Chr
A thick (0.92 mm) and highly absorbent paper.

31 ET
An extremely fast and thick paper (0.5 mm) with a fairly soft surface.

Features and Benefits

  • Pure cellulose produced entirely from the highest quality cotton linters with no additives of any kind. Ensures that no contamination will occur during the transfer steps
  • Manufactured and tested specifically for chromatographic techniques. This ensures the wicking capability and uniformity of capillary action that is important in obtaining clean and even transfers during blotting
  • Cytiva 3MM Chr is considered the industry standard for blotting procedures
  • Convenient sizes available in sheets precisely cut to the most popular gel and transfer membrane sizes. Allows "out-of-the-box" usage and eliminates sheet-to-sheet variations
Item#:
ASBLOTPAP4

3MW is used widely in nucleic acid and protein research for blotting, wicking, spacers, and gel drying due to its purity, quality and consistent results. Uniform capillary action provides even wicking and enables gel transfers to be lifted RELIABLY from glass supports.

Item#:
ASBLOTPAP1

Cytiva 3MM Chr paper is the world's most widely used blotting paper.

This acceptance and usage reflect the high quality, purity and consistency that are relied upon by researchers doing Southern, Northern and Western transfers. 3MM Chr paper is now available in the most widely used sizes. A medium thickness paper (0.34 mm) used extensively for blotting in electrophoresis for lifting of sequencing gels.

GB004
A thick gel blotting paper (1.0 mm), used for wicking purposes only. Provides higher absorbency and more consistent wicking than paper towels. Recommended for applications where fewer layers of gel blotting paper must still ensure a high capacity. Fewer layers of blotting paper reduce the risk of trapping air bubbles. Recommended for capillary blotting of nucleic acids.

GB005
An extra-thick (1.2 mm ), highly absorbent paper recommended for applications where fewer layers of blotting paper must siill ensure a high capacity. Recommended for semi-dry blotting of proteins.

17 Chr
A thick (0.92 mm) and highly absorbent paper.

31 ET
An extremely fast and thick paper (0.5 mm) with a fairly soft surface.

Features and Benefits

  • Pure cellulose produced entirely from the highest quality cotton linters with no additives of any kind. Ensures that no contamination will occur during the transfer steps
  • Manufactured and tested specifically for chromatographic techniques. This ensures the wicking capability and uniformity of capillary action that is important in obtaining clean and even transfers during blotting
  • Cytiva 3MM Chr is considered the industry standard for blotting procedures
  • Convenient sizes available in sheets precisely cut to the most popular gel and transfer membrane sizes. Allows "out-of-the-box" usage and eliminates sheet-to-sheet variations
Item#:
ASBLOTPAP5
Item#:
ASPCRSEALMAT
|◀ ◀ 385 - 396 of 541 ▶ ▶|
View: