Double sided water cooled vertical system, 16cmW x 14cm

•     Heavy duty upper buffer chamber with cooling port connections
•     Lower buffer chamber
•     Interlock safety lid with attached leads
•     Casting base
•     Four-pack each of plain and notched glass plates
•     One acrylic blocker plate (used when only one gel is being run)
•     Eight 1.5mm thick side spacers
•     Four combs of your choice

•     Alumina cooling plate for use with cooling systems. This plate can be sandwiched between the gel and the inner buffer chamber to improve overall temperature uniformity.
•     Casting base for quick, efficient and leak-proof gel casting.

Minigel System 7cm x 8 cm & (1) 6 and (1) 10 tooth comb

•     Heavy duty lower buffer chamber
•     Interlock safety lid with attached leads
•     Gasketed (cast in place) 7cm wide x 8cm long UV-transparent gel tray with built-in fluorescent ruler and 2 comb slots.
•     One 1.5mm x 6 tooth comb
•     One 1.5mm x 10 tooth comb

Horizontal Electrophoresis System, 20cmW x 25cm

•     Heavy duty lower buffer chamber
•     Interlock safety lid with attached leads
•     End gated 20cm wide x 25cm long ExpressCast™ UV-transparent gel tray with built-in fluorescent ruler and 6 comb slots.
•     One 1.5mm x 16 tooth combs, one 1.5mm x 24 tooth combs, one 1.5mm x 36 tooth combs

Semi-Dry Blotting Systems, 20cm x 20cm

Autoradiography Cassette Aluminum 5x7

Classic Push-Button Cassettes

• Constructed From Lightweight Aluminum & Nylon
• Special Curved Door Gives Exceptional Screen-Film Contact

RunBlue gels are more rigid and up to 10 times stronger than conventional precast gels resulting in more robust gels that can be handled with confidence. No tearing - an 8% gel can be thrown into the air and caught without breaking!

• RunBlue gels are manufactured using a unique method of polymerisation that results in more uniform and more complete polymerisation of the Acrylamide when compared to conventional, chemical based methods. This results in gels that have superior batch to batch reproducibility and practically eliminates exposure to un-polymerised Acrylamide.
• RunBlue gels incorporate a stacking gel that has been dyed (red for SDS) for the simplest ever sample loading. In addition, there is no comb to remove as the top of the teeth are fixed in place. This not only prevents the teeth from being accidentally torn off during comb removal but that all of the wells are uniform, with the teeth remaining vertical. This prevents sample cross contamination / inability to load desired Vol. The teeth also protrude above the lower front plate of the gel cassette preventing sample flow over into adjacent wells.
• Runblue gels are available in two different cassette sizes providing compatibility with the most common gel tanks and apparatus.  10x10 cm cassettes are compatible with Invitrogen/Life Technologies equipment and any other equipment designed for this format, such as the Hoeffer and Owl tanks. Our 8x10 cm cassette is designed to fit the Biorad equipment (Mini Protean I, II and II, Tetra etc).
• The resolving gel on RunBlue gels extends to the very bottom of the cassette which not only provides improved resolution but also there is no protruding gel that requires trimming prior to blotting. There is also no additional tape / covers to remove - simply take the gel from the pack and use.
• RunBlue gels are supplied in boxes of 10 gels. They are available in a 12 well format, covering a range of concentrations and gradients.

Benefits of RunBlue Precast Gels

• 2 year shelf life - never throw away another gel
• Up to 10x stronger - no more torn, ruined gels
• Load up to 20µl - see everything in your sample
• Dyed stacking gel - makes gel loading child's play (SDS = Red)
• No comb to remove - no more broken or bent teeth
• Full length resolving gel - improved resolution and better blotting
• 10x10 cm and 8x10 cm cassette - total compatibility with most popular tanks including Invitrogen and Biorad equipment
• Fast delivery with immediate and expert technical support for total peace of mind
• Best value gels available - save money!

MAXI Flex Tube Kit

MAXI Flex Tubes combine two modes of action: electro-elution of nucleic acid molecules from polyacrylamide or agarose gels and dialysis or buffer exchange of protein molecules. Flex Tubes allow rapid, secure, simple loading and recovery, with high performance as the most convenient, user friendly, electro-elution and dialysis system on the market.

KIT CONTENTS

• Flex Tubes 2/10/30/50/ 100 pieces
• Supporting tray (for electro elution protocol) 1ea. (select kits)
• Floating rack (for dialysis protocol) 1ea. (select kits)
• Information and Protocol Manual 1ea.

SPECIFICATIONS

• Membrane cut-off: 3.5K(11bp), 6-8K(18-24bp), 12-14K(36-42bp), 25K(76bp) or 50K(152bp) MWCO
• Tube volume: 3ml
• Dialysis volume: 0.1-3ml
• Min. sample size for extraction: 20µg
• Max. gel slice: 2cm x 1cm
• Membrane ultra-clean, sulfur and heavy metal free. EDTA treated
• Flex Tube MWCO are in kilo Daltons (K) for proteins and corresponding base pairs (bp) for nucleic acids as indicated in the table below:

APPLICATIONS

• Dialysis, electro-elution or buffer exchange with volumes between 0.1-3ml
• Preparation of protein samples for MALDI-MS
• Sample concentration
• Large-scale protein dialysis, such as antibodies and recombinant protein purification
• Removal of contaminating micro-molecules
• Tissue culture extraction purification
• Removal of salts, surfactants, solvents, and detergents
• Complex formation studies (protein-protein, protein-DNA, and protein-RNA)
• pH and buffer adjustment of sample solutions, protein extraction or cell extraction
• High throughput dialysis
• Peptide dialysis, as small as 10 amino acids
• Virus-particles purification

MIDI Flex Tube Kit

MIDI Flex Tubes combine two modes of action: electro-elution of nucleic acid molecules from polyacrylamide or agarose gels and dialysis or buffer exchange of protein molecules. Flex Tubes allow rapid, secure, simple loading and recovery, with high performance as the most convenient, user friendly, electro-elution and dialysis system on the market.

KIT CONTENTS

• Flex Tubes 2/10/30/50/ 100 pieces
• Supporting tray (for electro elution protocol) 1ea. (select kits)
• Floating rack (for dialysis protocol) 1ea. (select kits)
• Information and Protocol Manual 1ea.

SPECIFICATIONS

• Membrane cut-off: 1K(3bp), 3.5K(11bp) or 6-8K(18-24bp) MWCO
• Tube volume: 800µl
• Dialysis volume: 50-800µl
• Min. sample size for extraction: 0.5µg
• Max. gel slice: 1cm x 0.5cm
• Membrane ultra-clean, sulfur and heavy metal free. EDTA treated
• Flex Tube MWCO are in kilo Daltons (K) for proteins and corresponding base pairs (bp) for nucleic acids as indicated in the table below:

APPLICATIONS

• Dialysis, electro-elution or buffer exchange with volumes between 50-800µl
• Preparation of protein samples for MALDI-MS
• Sample concentration
• Large-scale protein dialysis, such as antibodies and recombinant protein purification
• Removal of contaminating micro-molecules
• Tissue culture extraction purification
• Removal of salts, surfactants, solvents, and detergents
• Complex formation studies (protein-protein, protein-DNA, and protein-RNA)
• pH and buffer adjustment of sample solutions, protein extraction or cell extraction
• High throughput dialysis
• Peptide dialysis, as small as 10 amino acids
• Virus-particles purification.

MEGA Flex Tube Kit

MEGA Flex Tubes enable user friendly dialysis or buffer exchange of protein molecules with rapid, secure and simple loading along with high performance yield recovery.

KIT CONTENTS

• Flex Tubes 2/10/30/50/ 100 pieces
• Floating rack (for dialysis protocol) 1ea. (select kits)
• Information and Protocol Manual 1ea.

SPECIFICATIONS

• Membrane cut-off: 1K, 3.5K, 6-8K or 12-14K MWCO
• Tube volume: 10ml, 15ml or 20ml
• Dialysis volume: 3-20ml
• Membrane ultra-clean, sulfur and heavy metal free. EDTA treated
• Flex Tube MWCO are in kilo Daltons (K) for proteins

APPLICATIONS

• Dialysis or buffer exchange with volumes between 3-20ml
• Preparation of protein samples for MALDI-MS
• Sample concentration
• Large-scale protein dialysis, such as antibodies and recombinant protein purification
• Removal of contaminating micro-molecules
• Tissue culture extraction purification
• Removal of salts, surfactants, solvents, and detergents
• Complex formation studies (protein-protein, protein-DNA, and protein-RNA)
• pH and buffer adjustment of sample solutions, protein extraction or cell extraction
• High throughput dialysis
• Peptide dialysis, as small as 10 amino acids
• Virus-particles purification

MINI Flex Tube Kit

MINI Flex Tubes combine two modes of action: electro-elution of nucleic acid molecules from polyacrylamide or agarose gels and dialysis or buffer exchange of protein molecules. Flex Tubes allow rapid, secure, simple loading and recovery, with high performance as the most convenient, user friendly, electro-elution and dialysis system on the market.

KIT CONTENTS

• Flex Tubes 2/10/30/50/ 100 pieces
• Supporting tray (for electro elution protocol) 1ea. (select kits)
• Floating rack (for dialysis protocol) 1ea. (select kits)
• Information and Protocol Manual 1ea.

SPECIFICATIONS

• Membrane cut-off: 6-8K(18-24bp), 12-14K(36-42bp) or 25K(76bp) MWCO
• Tube volume: 250µl
• Dialysis volume: 10-250µl
• Min. sample size for extraction: 0.5µg
• Max. gel slice: 0.4cm x 1.1cm
• Membrane ultra-clean, sulfur and heavy metal free. EDTA treated
• Flex Tube MWCO are in kilo Daltons (K) for proteins and corresponding base pairs (bp) for nucleic acids as indicated in the table below:

APPLICATIONS

• Dialysis, electro-elution or buffer exchange with volumes between 10-250µl
• Preparation of protein samples for MALDI-MS
• Sample concentration
• Large-scale protein dialysis, such as antibodies and recombinant protein purification
• Removal of contaminating micro-molecules
• Tissue culture extraction purification
• Removal of salts, surfactants, solvents, and detergents
• Complex formation studies (protein-protein, protein-DNA, and protein-RNA)
• pH and buffer adjustment of sample solutions, protein extraction or cell extraction
• High throughput dialysis
• Peptide dialysis, as small as 10 amino acids
• Virus-particles purification

• Molded, durable construction
• Rubber gates for easy, tapeless gel casting
• Adjustable height combs
• Loading guides aid in well visualization

Enduro Horizontal Gel Boxes have been designed for ease of use, safety and durability. A variety of sizes are available, from a mini gel system to a large maxi gel system that can accommodate as many as 450 samples in a single run. A wide range of accessories are available to customize your system, including multichannel compatible gel combs.

QUALITY CONSTRUCTION - The Enduro gel tanks are molded for leakproof performance and a long service life. The corrosion resistant platinum electrodes are located in cassettes to protect them during cleaning and provide for easy replacement. The lids fit on the gel boxes in only one direction. A drip ring on the lid recycles condensed buffer and prevents it from dripping directly onto the gel.

EASE OF USE - Casting gels for the Enduro system is very easy. Simply snap the rubber gates onto the ends if the tray, place the comb in position and pour the gel - no taping is necessary. Slots on the sides of the gel trays hold the combs in place. The two piece combs are designed so that the teeth can be raised or lowered to vary the depth of the well within the gel. The supplied combs are 1.5 mm thick. Combs of other thicknesses are available separately. After the gel has hardened, the combs and gates are removed and the gel and tray placed in the gel box. Loading strips may be placed on the bottom of the gel box to aid in well visualization. Gel trays are UV transparent.

DESIGNED FOR SAFETY - The power leads for the Enduro system are attached to the gel box lid. The connection with the electrodes is made only when the lid is properly in place. Removal of the lid removes power from the system. Side tabs and pressure pads make lid removal easy and prevent sloshing of buffer.

Combs for E1015-10 & E1015-15