Lab Equipment

Shopping for scientific equipment has never been as easy as browsing through our catalog; rich in premium, ergonomic, durable, and affordable lab equipment of all sorts.​

Our stock of lab equipment is so vast that we can only offer a small preview here but, rest-assured, we firmly believe that any lab equipment you buy from MIDSCI is going to satisfy your needs. 
  
MIDSCI offers accurate balances, quiet centrifuges, ergonomic chairs, powerful homogenizers, and durable hotplates. 
  
We also carry incubators known for temperature uniformity, microplate readers with artificial intelligence onboard, microscopes with infinity-corrected optics, and water purification systems that can save you money. 
  
Many of our items come with amazing warranties and some carry additional discounts.

|◀ 1 - 12 of 369 ▶|
View:

Class II Biosafety Cabinets

Airstream Reliant Type A2

Airstream® Reliant Class II Type A2 Biosafety Cabinets


Protect lab personnel, sample and the environment with Esco's newest addition to its range of world-class biosafety cabinets, Airstream® Reliant Class II Type A2 Biosafety Cabinets. With Esco's more than 35 years of expertise in cabinet design, Airstream® Reliant is designed with energy efficiency, robustness, comfort and ergonomics.


Best in Filtration: Uses ULPA (Ultra Low Penetration Air) filters which operate at a typical efficiency of 99.999% which is ten times the contamination protection over conventional HEPA filters.
Easy Cleaning:  The work space is single piece coved stainless steel without any screws or connectors. The wall is single piece stainless steel with easy to reach service fixtures and outlets.
Extra Protection: Isocide powder coating finish prevents microbial/bacterial growth in the exterior and interior.
Operator Comfort: Raised arm rest which helps prevents grille blocking while providing operators with comfortable working position.

Key Benefits:

  • Easy to use analog switches and UV timer
  • Energy and Space Saving
  • Analog Night Setback Mode
  • Large Safety Margin
  • Ergonomic and comfortable low noise

OPERATOR, SAMPLE AND PROCESS PROTECTION

  • Long-life ULPA filters with 99.999% efficiency for particle size between 0.1 to 0.3 microns. This creates ISO Class 3 work zone instead of industry-standard ISO Class 5.
  • Expert Airflow Design for Maximum Effectiveness
  • Angled supply matches cabinet profile to achieve best downflow uniformity and containment.
  • Raised airflow grille maintains safety by preventing blockage.
  • Negative pressure plenum surrounds contaminated positive pressure plenum and work zone.
  • Advanced DC ECM blower that provide stable airflow despite building voltage fluctuation and increased filter loading.
  • Esco ISOCIDE antimicrobial coating on all painted surfaces prevents microbial/bacterial growth.

OPERATOR BENEFITS:

  • Ergonomically angled front improves reach and prevent ceiling lamp reflection.
  • Easy to clean coved one-piece work surface which contains spillage, and angled drain pan with smooth polished corners.
  • Easily adjustable UV timer that doesn't require the operator to manually turn off UV lamp.

(S-series), NSF 49 Certified


The World's Leading Energy Efficient, Quiet, and Ergonomic Biosafety Cabinet


Escoâs Airstream® Class II Type A2 Biological Safety Cabinet is one of the best choices when you are looking for operator, product and environmental protection for your laboratory. Now equipped with energy efficient DC ECM Motor, this is the most energy efficient Class II Biosafety Cabinet in the world offering 70% energy savings compared to legacy AC motor. Its Sentinel Gold Microprocessor Controller displays all information you need on its screen. With its dynamic chamber, ISO Class 3 work zone and ISOCIDE⢠powder coat on all its external and interior painted surfaces, you are ensured that you, the operator, as well as the product and the environment are protected from harmful biological agents. NSF 49 and UL 61010 certified, the Airstream® Class II Type A2 Biological Safety Cabinets proves that Esco is an industry leader in cleanroom equipment.

Key Benefits:

  • Latest microprocessor technology with ease of use
  • Energy Efficient with the DC ECM motor
  • ISO Class 3 work zone
  • NSF 49 and UL 61010 certified
  • Sentinel Gold Microprocessor Controller displays all important information, centered and angled down for easy reach and viewing; fast and reliable operation.
  • Elegant design matched with proven ISOCIDE⢠powder coat technology that inhibits microbial growth on external surface prevents contamination and improves safety.
  • Angled sash to optimize user comfort, reduce glare and maximize reach into the work area.
  • Leading energy efficient Class II Type A2 Biosafety Cabinet in the world with 70% energy savings compared to AC Motor.
  • Equipped with ULPA filter which provides better filtration than HEPA filter at 99.999% typical efficiency for particle sizes of 0.1 to 0.3 micron.
  • Dynamic Chamber offering blower plenum and side walls surrounded by negative pressure ensures containment.
  • Provides ISO Class 3 work zone instead of industry-standard ISO Class 5.
  • Single-piece wall allows easy reach to service fixtures and electrical outlets.
  • Raised arm rest prevents grille blocking, and provides comfortable working posture.
  • Easy-to-clean Removable Paper Catch with optional pre-filter
  • Recessed single-piece work tray to contain spillage with sloped easy-to-swipe perimeter.
  • Optional HPV port and universal type service fixture offers more productivity
Item#:
AR2-4S9
Your Price:
7962.99
Each

Ice Flaker w/ Storage Bin

for up to 395 lbs/day

Dependable Performance in Any Condition


REPLACES THE AFE400 MODELS


Features

  • Improved design for higher reliability
  • Up to 395 lbs. of ice per day
  • Stores up to 80 lbs.
  • Delivers steady flow of ice for fast recovery of ice supply.
  • Low energy and water consumption
  • 7-ft. power cord for quick installation
  • Completely serviceable from the front side
  • 3-piece cabinet is easily removable from front
  • Front air flow allows for placement in tight spaces
  • Cabinet constructed of durable rust-free rotocast plastic
  • Fits under any 40" counter
  • Provides convenient and easy access to ice
  • 2 years parts on all components, 2 years labor on all component parts and 5 years parts on the compressor
Item#:
AFE424
Your Price:
7787.00
Each

Class II Biosafety Cabinets

Airstream Reliant Type A2

Airstream® Class II Type A2 Biological Safety Cabinets (S-series), NSF 49 Certified


The World's Leading Energy Efficient, Quiet, and Ergonomic Biosafety Cabinet


Escoâs Airstream® Class II Type A2 Biological Safety Cabinet is one of the best choices when you are looking for operator, product and environmental protection for your laboratory. Now equipped with energy efficient DC ECM Motor, this is the most energy efficient Class II Biosafety Cabinet in the world offering 70% energy savings compared to legacy AC motor. Its Sentinel Gold Microprocessor Controller displays all information you need on its screen. With its dynamic chamber, ISO Class 3 work zone and ISOCIDE⢠powder coat on all its external and interior painted surfaces, you are ensured that you, the operator, as well as the product and the environment are protected from harmful biological agents. NSF 49 and UL 61010 certified, the Airstream® Class II Type A2 Biological Safety Cabinets proves that Esco is an industry leader in cleanroom equipment.

Key Benefits:

  • Latest microprocessor technology with ease of use
  • Energy Efficient with the DC ECM motor
  • ISO Class 3 work zone
  • NSF 49 and UL 61010 certified
  • Sentinel Gold Microprocessor Controller displays all important information, centered and angled down for easy reach and viewing; fast and reliable operation.
  • Elegant design matched with proven ISOCIDE⢠powder coat technology that inhibits microbial growth on external surface prevents contamination and improves safety.
  • Angled sash to optimize user comfort, reduce glare and maximize reach into the work area.
  • Leading energy efficient Class II Type A2 Biosafety Cabinet in the world with 70% energy savings compared to AC Motor.
  • Equipped with ULPA filter which provides better filtration than HEPA filter at 99.999% typical efficiency for particle sizes of 0.1 to 0.3 micron.
  • Dynamic Chamber offering blower plenum and side walls surrounded by negative pressure ensures containment.
  • Provides ISO Class 3 work zone instead of industry-standard ISO Class 5.
  • Single-piece wall allows easy reach to service fixtures and electrical outlets.
  • Raised arm rest prevents grille blocking, and provides comfortable working posture.
  • Easy-to-clean Removable Paper Catch with optional pre-filter
  • Recessed single-piece work tray to contain spillage with sloped easy-to-swipe perimeter.
  • Optional HPV port and universal type service fixture offers more productivity
Item#:
AC2-4S9-NS
Your Price:
8300.00
Each

Airstream® Polymerase Chain Reaction Cabinets


Keeping PCR reactions free of contaminants is imperative because PCR is an amplification process and contaminants will also be amplified in number. Therefore, it is essential to prevent possible contamination of the reaction with the highest air quality using the Esco line PCR Cabinets. The Airstream® PCR cabinets apply our renowned clean air expertise and decades of experience to deliver "best-in-the-world" technology to protect your PCR reaction. With our reputation as a world's leading "clean air technology❠expert based on over 35 years of experience building systems to protect personnel, samples and process from contamination and developers of some of the worldâs finest Laminar Flow hoods and BioSafety Cabinets, Esco will help to maintain the integrity of your PCR reactions.

  • World-leading clean-air technology protects your PCR.
  • Decades of experience in designing leading Laminar flow hoods ensures contamination-free reaction.

Key Benefits:

  • HEPA-filtered laminar flow with efficiency of >99.99% efficiency.
  • Airflow monitoring and UV Lamp for optimal reaction protection and decontamination.
  • ISOCIDE antimicrobial coating on all painted surfaces minimizes contamination for user and sample protection.
  • High Energy Efficiency results in long-term financial savings.
Item#:
ASHOODS1

VX130

  • For samples 150µL to 150mL
  • Real time display includes energy monitor, digital wattmeter, automatic tuning and amplitude compensation, elapsed time indicator, and variable output control
  • 10 hour timer; 1-59 second, independently controllable ON/OFF pulser
  • Includes standard 6mm probe for 10-50ml: 4.5 inch length, titanium alloy

VCX130PB

  • For samples from 150 uL to 150 mL
  • Energy monitor
  • Digital Wattmeter
  • Automatic tuning and amplitude compensation
  • Thumb actuated pulser

 

Specifications:
VX130 VCX130PB
Net Power Output: 130 watts 130 Watts
Frequency: 20 kHz 20 Hz
Dimensions (WxDxH): 9.75x12.5x4.5 inches 9.75X12.5X4.5
Weight: 7 lbs. 6 lbs
Warranty: 3 years 3 years
Item#:
ASSONICATOR

Our quiet, reliable, and low cost two-stage high vacuum rotary vane pump comes both in 120V and 220V versions with or without a gauge.


Specifications:


Ultimate Vacuum

25 microns/laboratory conditions

Pump Speed

1725 RPM (85 liters per minute)

Motor

½ HP, 110V, 60Hz

Oil Capacity

17 oz. (785cc)

Operating Temperature

30°FF to 170°F

Intake Port

3/8" OD for 3/8" ID Tubing

Dimensions (H x L x W)

11 x 14 x5 ¼ in (27.5 x 35 x 12.5 cm)

Shipping Weight

31 Lbs


Part #

Description

LAV-3

3 cubic feet per minute (85L/m) high vacuum rotatory vane pump, 120V

LAV-3-G

3 cubic feet per minute (85L/m) high vacuum rotatory vane pump with a mounted bourdon type gauge, 120V

LAV-3-220

3 cubic feet per minute (85L/m) high vacuum rotatory vane pump, 220V

LAV-3-220-G

3 cubic feet per minute (85L/m) high vacuum rotatory vane pump with a mounted bourdon type gauge, 220V

Item#:
ASVACCUM

Operating features

  • 5° above room temperature to°
  • Microprocess PID control/ Auto-tuning/ Calibration
  • Digital timer: 1 min to 99 hr 59 min, delayed ON/ OFF
  • Over-temperature limiter and low fluid level protection
  • 3 different temperature values memorable without auto-tuning
  • Digital LED display (0.1° resolution) with splash-proof keypads
  • RS-232 interface available

Constructional features

  • Exclusive variable-speed pump to liquid viscosity for accurate, stable, and efficient temperature management
    (1 to 3 steps of pump for internal circulation/ 4 and 5 steps for external circulation)
  • Powerful pressure and suction pumps provide contrast pressure and flow rate over the full temperature range
  • Baffle plate screens circulating pump, heater and sensor to minimize shaking bath fluids and protect sample and 
    operators from direct contact
  • Dry-running protection; automated heating element cut-off and audible and visual warning
  • Seamless stainless steel tank with a reservoir drain that resists corrosion and make cleaning easy
  • Space saving design uses minimal bench space
    Model CW-05G CW-10G CW-20G CW-30G
    Bath volume (L/cu ft) 5.0 / 0.2 10.0 / 0.4 20.0 / 0.7 30.0 / 1.1
    Working Temperature Range2)(°)
    Amb. +5 to 150 / Amb. +9 to 302
    Temperature Stability 1)(±1°) 0.05 / 0.09 0.05 / 0.09 0.1 / 0.18 0.1 / 0.18
    Pump Max. pressure,
    max. flow rate
    5.9 PSI (406.8 millibar), 7.4 gallons/minute (28.0 liters/minute)
    Max. suction flow rate 2.6 gallons/minute (10.0 liters/minute)
    Dimensions Bath opening/ depth 
    (WxL, D) (mm/inch)
    150x99, 160
    / 5.9x3.9, 6.3
    211x154, 180
    / 8.3x6.1, 7.1
    290x214, 200
    / 11.4x8.4, 7.9
    300x264, 230
    / 11.8x10.4, 9.0
    Overall 
    (WxLxH)(mm/inch)
    220x395x424
    / 8.7x15.6x16.7
    281x450x444
    / 11.1x17.7x17.5
    360x510x464
    / 14.2x20.1x18.3
    370x560x494
    / 14.6x22.0x19.4
    Net weight(kg/lbs) 12.5 / 27.6 15.0 / 33.0 17.5 / 38.6 19.5 / 43.0
    Electrical Requirements
    (230V, 60Hz)
    50/60Hz, 4.5A 50/60Hz, 6.7A 50/60Hz, 8.8A 50/60Hz, 8.8A
    Cat. No. AAH52305K AAH52315K AAH52325K AAH52335K
    Electrical Requirements 
    (120V, 50Hz)
    50/60Hz, 8.6A 50/60Hz, 8.6A 50/60Hz, 8.6A 50/60Hz, 8.6A
    Cat. No. AAH52306U AAH52316U AAH52326U AAH52336U

    1) If you operate the unit in 1 to 3 steps of pump, the temperature range can be from Amb. +5° but in 4 and 5 steps, 
    the range will be from Amb. +15°.
    2) The heat-up time is measured on a 230V electrical condition with 1000W heater power.

Item#:
AAH52336U
Your Price:
2435.59
Each
Item is no longer available.

myTemp 65L

Incubator, 0 -60 C,heat/cool

One Model for Heating and Cooling with Accurate Temperature Control from 0° to 60°C


Overview
The myTemp 65 Incubator is designed to provide accurate and uniform temperature control from 0 to 60°C. The broad temperature range of the instrument expands the use of this incubator to both heating and cooling applications.


A large, digital display allows for visualization of the chamber temperature and the remaining incubation time, while an internal light is included for improved visualization of the chamber. In addition, a built in, internal outlet can be used to provide power to small instruments, such as shakers, rockers, etc.
With forced air technology and stainless steel inner construction, uniform heat transfer is ensured throughout the internal chamber. When set for sub-ambient temperatures, the powerful compressor is activated, quickly cooling the chamber to the desired temperature.


With an exterior height of 39 inches (100cm), the incubator is designed to be floor-standing, yet is also compact enough for bench-use. (Not recommended for use on benchtops taller than 32"/81cm). The instrument is supplied with two, adjustable height shelves, while additional shelves can also be purchased separately (item: H2365-SH).


Features

  • Accurate temperature control from 0° to 60°C
  • Powerful compressor maintains 0°C
  • Stainless-steel internal chamber
  • Internal power outlet for shaker, mixers, etc.
  • Sized for floor standing use or on bench-tops less than 32" tall

 

Technical Data

Temp. Range:

0°C to 60°C (RT-25°C to 60°C)

Temp. Accuracy:

0.5°C (at 37°C)

Temp. Uniformity:

+/- 1.0°C (at 37°C)

Temp. Increment:

0.1°C

Exterior Dimensions: (WxDxH)

21.25 x 21 x 39.35 in.

Interior Dimensions: (WxDxH)

15.75 x 12.75 x 19.75 in.

Capacity:

65L (2.3 cu. ft.)

Weight:

117 lbs

Refrigerant:

R134A

Electrical:

120, 60HZ or 230V, 50Hz (385W)

Warranty:

2 Years

Operating Temp. Range:

+10 to +30°C

Item#:
H2265-HC
Your Price:
2699.00
Each

SHEL LAB Diurnal Plant

Growth Chamber, 20.3 cu.ft.,

This illuminated growth chamber features dual-program selector dials, which allows control of two temperature conditions and an ON/OFF illumination cycle relative to the program selected. Each system operates independently allowing for simulation of a diurnal cycle, such as an eight hour day cycle of 30°C with light followed by a sixteen hour night cycle of 18°C without light. Forced air circulation ensures the most reproducible test conditions. The chamber air is gently and continuously circulated at a rate that ensures temperature uniformity of all test samples.

The unit is equipped with a hermetically-sealed compressor and an independent over temperature safety controller. It also includes a circuit breaker to protect from electrical overload, four fixed shelves, adjustable leveling feet, a condensation drip tray, a steel exterior with welded seams and corners, and a double-coated, baked enamel finish. In addition, one amp interior outlet allows use of shakers, stirrers, roller bottles or other apparatus.

SHEL LAB Diurnal growth chambers are designed for studies requiring day and nighttime simulation. Units include:

  • Day/Night Light and Temperature Control
  • Microprocessor Control
  • LED Display of Set point and Chamber Temperature
  • High and Low Limit Temperature Protection
  • Interior Electrical Outlet
  • Fan Assisted/Forced-Air Circulation
  • Hermetically Sealed Compressor
  • 24 month limited warranty

 

Specifications:

LI15

Capacity (cu.ft.)

17.0

Interior Dimensions (WxDxH) inch.

27 x 24 x 58

Exterior Dimensions (WxDxH) inch.

34 x 33 x 77

Temp Range:

0°C to 40°C (at 20°C ambient)

Temp Uniformity:

±0.5°C at 20°C

Standard B.O.D. Bottle Capacity:

317

Shelving:

4 supplied

Interior Outlet:

1

Item#:
SRI21D
Your Price:
8011.00
Each

SHEL LAB Reciprocating Water Baths deliver precise temperature control and a smooth reciprocal shaking motion. Temperature and oscillation controls feature an easy to read P.I.D. microprocessor temperature controller and an independent safety thermostat. 

The bath may be used with or without oscillation. Shaking speed is variable from 20 to 200 oscillations per minute, and the stroke length can be adjusted to three separate settings: 0.5, 1.0, or 1.5 inches to minimize the chance of accidental spillage. Also, the unique basket support system is designed to eliminate tank wear, yet still provide full support and free action for a heavily loaded basket. 

A durable finish on the housing prevents corrosion and chipping. In addition to a stainless steel tank, the bath platform tray is designed for optimum temperature uniformity. Maximum temperature is achieved using the stainless steel gable cover, which is designed to prevent condensate from dripping onto samples and assures uniform temperature conditions. These units feature:

  • Microprocessor Control
  • Independent Oscillation and Temperature Controls
  • Recessed Heating Element to Prevent Burnout
  • Adjustable Stroke Length
  • Great for heat inactivating FBS
  • 2 year limited warranty, excludes tank

Specifications:

WS17

WS27

Tank Capacity:

16L

27L

Temp Range:

Ambient +5°C - 90°C

Ambient +5°C - 90°C

Temp Uniformity:

±0.2°C at °C

±0.2°C at °C

Interior Dimensions
(WxDxH) inch.

14.7 x 11.7 x 7.5      

27 x 12 x 7.2

Exterior Dimensions
(WxDxH) inch.

25.5 x 15.5 x 12.5

37.5 x 14.8 x 12.5

Shaking Motion:

Reciprocal

Reciprocal

Shaking Speed:

20-200rpm

20-200rpm

Stroke Length (inch.)

0.5/1.0/1.5 (adj.)

0.5/1.0/1.5 (adj.)

Voltage
120V
120V

Weight:

57 lbs.

79 lbs.

WS17 and WS27Flask Clamp Capacities:

Item #

Description

Size

WS17

WS27

9530528

Flask Clamp

25ml

24

48

9530529

Flask Clamp

50ml

24

48

9530530

Flask Clamp

125ml

24

48

9530531

Flask Clamp

250ml

12

24

9530526

Flask Clamp

500ml

6

12

9530532

Flask Clamp

1000ml

4

8

9530551

Flask Clamp

2000ml

2

4

9530553

Flask Clamp

2800ml fernbach

1

3

9530554

Flask Clamp

4000ml

1

2

9530555

Flask Clamp

6000ml

1

2

Item#:
SWBR17
Your Price:
2981.00
Each

Incubator, Shaking, Hyb

Shake 'N' Bake Model

Applications:

  • Hybridization and wash procedures for scientists that prefer to use heat sealed bags, plate or dishes/trays
  • Conventional incubations with or without rocking motion
  • Cell culture in bags

Features:

  • Gentle rocking motion is perfect for washes and hybridization
  • Small footprint saves bench space
  • Three removable shelves, each capable of holding blots up to 20cm x 20cm
  • Gasket sealed metal and acrylic plastic see through door
  • PID controller for easy temperature selection and stability
  • Adjustable rocking speed from 8 to 25 strokes per minute
  • Temperature up to 70°C
  • Supplied with three removable shelves. Please note: Total maximum shelf load is 1 kg (2.2 lb.)
  • The Shake 'n' Bake has a 2 year warranty
Temp Range Ambient +5°C to 70°C
Temperature Stability 0.5°C at 65°C (within chamber)
0.25°C at 65°C (within sample vessel)
Exterior Dimensions 12.5"W x 14.5"D x 16"H
Interior Dimensions 11.5"W x 11.5"D x 10.5"H
Removable Tray Dimensions 8.5"W x 8"D x 0.5"H
Electrical 115V / 60Hz
Warranty Two Years Parts & Labor
Item#:
136400
Your Price:
2858.94
Each

SHEL LAB Basic CO2

Water-Jacketed Incubator,

The Model SCO6WE was designed and manufactured to accommodate tight budgets, while maintaining the fundamental needs of quality and precision. These units have PID microprocessor controllers, a heated outer door and a tempered-glass inner door. They provide exceptional temperature uniformity, while minimizing cold spots that lead to condensation and ultimately, contamination. Temperature Range Ambient + 8°C t°C. Temperature Uniformity ± 0.2°C at 37°C.

Although they do not have a humidity display, the extremely stable temperature environment maintains constant humidity through evaporation at 95%. Double wall construction reduces this unit's footprint, so they fit in tight spaces as well as tight budgets.

The audible/visual alarms for temperature and CO2 respond to out-of-tolerance conditions. They offer an independent overtemperature safety control to protect samples from overheating, and an optional CO2 tank switch/alarm to prevent prematurely exhausting the gas supply. Features include:

  • Infrared CO2 Sensor
  • Heated Outer Door
  • Independent Overtemperature Protection
  • Quick Clean Shelf System
5 Year Limited Warranty

 

Specifications:

SCO6WE

Chamber Capacity:

6.0 cu.ft

Temp Range:

Ambient + 8°C to 60°C

Temp Uniformity:

+/- 0.2°C at 37°C.  

CO2 Sensor

Infrared (IR)

CO2 Range:

0-20%

CO2 Recovery Rate:

< 5 minutes

Interior Dimensions
(WxDxH) inch.

20.2 x 19.7 x 25.2 (51.4 x 50.1 x 64.1 cm)

Exterior Dimensions
(WxDxH) inch.

26.0 x 26.3 x 40.3 (66.0 x 66.7 x 102.2 cm)

Shelves:

3 supplied (16 max)

Net weight/Shipping Weight:

245/310 lbs.

Item#:
SCO6WE
Your Price:
6210.00
Each
|◀ 1 - 12 of 369 ▶|
View: