PR1MA™ V2 Vortex Mixer

• Reversible top platform, cup, or flat-dimpled surface
• Powerful motor for INSTANT vortexing
• Continuous or touch operation
• Q Drive dynamic balancing system
• Variable speed from 200 to 3200 rpm
• Wide variety of accessories, for tubes up to 50 mL

The PR1MA™ V2 Vortex Mixer utilizes a smooth and powerful mixing technology, with the advantage of a uniquely designed reversible rubber head that can be attached to the mixer in two orientations. For the vortexing of single tubes, the cupped surface would generally be preferred. However, for applications requiring a flat/dimpled surface for mixing uniquely shaped vessels (or a handful of multiple test tubes), the head can easily be flipped over and reattached in reverse orientation.

The drive system is balanced with Q-Drive™ technology, providing a smooth vortexing action, while minimizing noise and excessive vibration. This results in quieter, more efficient, and longer lasting operation. With a maximum speed up to 3,200 rpm, the mixer provides an instant vortex of even the largest sample sizes, including full 50 mL tubes.

Specifications

PR1MA™ Orbi-Shaker™ Small 

• Digital speed control up to 300 rpm
• Horizontally circular 19 mm orbit for aeration & mixing
• Extremely compact, perfect for low to medium capacity applications
• Instantly exchange flask clamps with MAGic Clamp™ accessories

The PR1MA™ Orbi-Shaker™ Small is designed for smaller capacity applications and laboratories where bench space is at a premium. The shaker includes a 9.5 x 8" platform that mixes at a 19 mm orbit, perfect for thorough mixing and aeration in Erlenmeyer flasks.

An optional MAGic Clamp™ platform is available for use with Erlenmeyer flasks and test tube racks. The unique magnetic attachment method is the easiest way to instantly change between flask clamps of different sizes. (PATENTED)

Specifications

PR1MA™ 12 Mini Microcentrifuge

 
Spin microtubes and PCR strips simultaneously without changing rotors!
 
Unlike traditional mini centrifuges, the PR1MA™ 12 eliminates the need to change rotors when switching between microtubes and PCR strips. The included, unique COMBI-Rotor™ is all that is required for running 12 microtubes and 4 PCR strips simultaneously.
 
COMBI-Rotor™, for tubes and strips

• Twice the capacity of traditional mini centrifuges
• Near silent operation
• Starts & stops with closing/opening of the lid
• 1-year warranty

Specifications 

 
PR1MA™ Mini Digital Dry Baths 

PR1MA™ Mini Digital Dry Baths (Heat Only – MB100) (Heat & Cool – MB300)

• Compact, fits on any crowded benchtop
• Available in heat only or heat & cool versions
• Exchangeable blocks for 0.2 to 50 mL tubes
• Simple touchpad, digital control
• Link two consecutive programs (cooling model only)
• Custom blocks available upon request
• Blocks sold separately

With its compact construction, broad temperature range, and multiple block options, the PR1MA™ Mini is the perfect tool for laboratory incubations. The simple touchpad controls and a digital display provide for “set and walk away” temperature selection and unrivaled accuracy.

While perfect for bench use, the optional 12V adapter expands the utility of the PR1MA™ Mini to field use. At less than 4.3 inches wide, PR1MA™ Mini is truly the first personal block incubator.
 

PR1MA™ Mini Digital Dry Bath with Heated Lid (MB100-HL)

• Heated lid prevents evaporation & condensation
• Compact, fits in the palm of your hand
• Independent temperature control of lid & block

The PR1MA™ Mini Digital Dry Bath with Heated Lid is the first and only mini heat block featuring a heated lid for protecting samples against unwanted condensation and evaporation.

Both the block and lid temperature can be selected independently in increments of 0.1°C, making it the ideal choice for the most temperature-sensitive applications, including immunoassays, LAMP assays, enzyme reactions & other temperature hyper-sensitive procedures.

Specifications 
 

	MB100	MB300	MB100-HL
Temperature Range	RT +5°C to 100°C	RT -25°C to 100°C	Ambient +5 to 100°C
Temperature Accuracy	+/- 0.5°C	+/- 0.5°C	+/- 0.3°C
Temperature Uniformity	+/- 0.2°C	+/- 0.2°C	+/- 0.2°C
Temperature Increments	0.1°C	0.1°C	0.1°C
Ramp Time: 20° to 100°C	< 20 min.	< 20 min.	< 20 min.
Ramp Time: 20° to 0°C	N/A	< 25 min.	N/A
Dimensions (w x d x h)	4 x 6 x 4.5 in. 10.5 x 15 x 11.5 cm	4.3 x 6.4 x 5.5 in. 11 x 16.2 x 14 cm	4 x 6 x 4.5 in. 10.5 x 15 x 11.5 cm
Block Dimensions	1.85 x 2.8 x 1.25 in. 4.7 x 7.1 x 3.2 cm	1.85 x 2.8 x 1.25 in. 4.7 x 7.1 x 3.2 cm	1.85 x 2.8 x 1.25 in. 4.7 x 7.1 x 3.2 cm
Weight	2 lbs | 1 kg	2 lbs | 1 kg	2 lbs / 1 kg
Electrical	Universal Voltage, 100 to 240V, 50-60Hz, 50W	Universal Voltage, 100 to 240V, 50-60Hz, 50W	Universal Voltage, 100 to 240V, 50-60Hz, 50W
Warranty	2 years	2 years	2 years

 

PR1MA™ Digital Dry Bath Series

• Digital temperature control
• Hinged lid
• External (optional) temperature probe
• Available with Quick-Flip universal blocks (supports all common tube sizes, PCR strips, and PCR plates)
• Blocks sold separately

The PR1MA™ Digital Dry Bath Series is a "next generation" product line that introduces several major advantages over traditional dry baths. They are the first digital dry baths to include advanced microprocessor controls, timed or continuous operation, and a removable hinged lid. In addition, an optional external temperature feedback probe can be positioned directly inside a sample tube, providing real-time control and monitoring of actual sample temperature.

The PR1MA™ Digital Dry Bath's transparent lid helps to promote better uniformity and minimize temperature stratification in the block by maintaining a warm air jacket layer. It also helps to reduce energy consumption by minimizing heat loss to the environment. The hinged lid can be flipped open (to the rear), or easily removed (lifted off) to accommodate taller tubes.

Both the single and dual block models can be ordered in a configuration that includes our unique Quick-Flip™ blocks. These universal blocks accept tubes from 0.5 to 2.0 mL and, with just a quick flip to the other side, accommodate 0.2 mL tubes, PCR strips or (in the dual block model only) a PCR plate.

Other blocks are available for tubes up to 50 mL.

Specifications

• Digital speed control up to 1500 rpm
• 3 mm orbit for thorough mixing in microplates
• Includes platform for up to 4 microplates
• Cold room and incubator safe
• Optional adapters for mixing microtubes 

The PR1MA™ Orbital Microplate Shaker is designed with a 3 mm mixing orbit, optimized for thorough mixing of microplates and/or PCR plates. Up to four plates (standard or deep well) can be placed on the included platform and are instantly secured without the use of springs, clamps, or tools.

Specifications

• Redesigned to accept two 1 L Flasks
• Increased temperature control up to 70°C 
• Instant clamp exchange with MAGic Clamp system
• Only 11 inches wide
• 2 year warranty 

The PR1MA™ Mini Incubated Shaker is the most compact shaking incubator in its class. Despite the remarkably small footprint, a large 11.5 x 9.5 In. work space accepts several platforms for use with a variety of vessels.

The standard platform (included) features a non-slip rubber-coated surface ideal for TC flasks, petri dishes, and staining trays.

The convenient MAGic CLAMP™ Platform is also available for use with Erlenmeyer flasks and test tube racks. The unique, magnetic attachment method is the easiest way to instantly change between flask clamps of different sizes.

Specifications
 

Temp. Range	Ambient + 5°C to 70°C (0.1°C increments)
Temp. Uniformity	±0.25%
Temp. Accuracy	±0.1%
Shaking Speed Range	30-300 rpm
Shaking Orbit	0.74 In. | 19 mm
Platform Dimensions	9.5 x 11.5 In. | 241.3 x 292.1 mm
Exterior Dimensions: (W x D x H)	11 x 15.7 x 10.5 In. (height 25 In. w/ lid open) 279.4 x 398.78 x 255.27 mm (365 mm)
Weight	25 lbs | 11.34 kg
Electrical	115V (230V available)
Warranty	2 year

 

IS-300 Platforms and Accessories

PR1MA™ Hotplates, Magnetic Stirrers, and Hotplate-Stirrers

• Ceramic work surface, 7.1 x 7.1 In.
• Stir speed from 60 to 1500 rpm
• Temperature control up to 380 °C
• Three models: heat-stir, heat-only or stir only

PR1MA™ hotplates, stirrers, and hotplate-stirrers feature an exceptionally durable, chemical-resistant white ceramic work surface. Their space-efficient design (8 x 9 in. footprint), makes them ideal for use on crowded benchtops and inside of bio-hoods.

Advanced microprocessor controls with convenient turn knobs allow quick, precise adjustment and maintenance of speed and temperature. Safety indicator LED’s on the front panel indicate when the heating and/or stirring functions have been activated. With a square 7.1 In. work surface, all three models are compatible with a wide variety of popular sizes of borosilicate glass beakers, flasks, bottles, and other vessels. The hotplate/magnetic stirrer model (MS-1500) comes complete with a support rod for mounting thermometers and temperature probes.

Specifications

Temp. Range	80 °C to 380 °C
Speed Range	60 to 1,500 rpm
Platform Dimensions	7.1 x 7.1 In. | 180 x 180 mm
Operating Temp. Range	+4 °C to +65 °C
Dimensions	8.5 x 10 x 4.5 in.
(W x D x H)	20 x 23 x 11.5 cm
Weight	9 lbs | 4 kg
Electrical	120 V, 60Hz
Warranty	2 years

 
Models 

HP-380	PR1MA™ Hotplate
MS-1500	PR1MA™ Magnetic Stirrer
SH-1500	PR1MA™ Hotplate Magnetic Stirrer

 
 

PR1MA™ Roto-Mini Series

• Includes tube holders for common tube sizes, 11 x 1.5 / 0.2 mL (pack of 2), 5 x 10-15 mL (pack of 2), 5 x 5-7 mL (pack of 2), 6 x 50 mL (pack of 1)
• Plus model available with variable speed control and advanced shaking / mixing modes: Mix (Oscillating), Pause, Rock

The new PR1MA™ Roto-Mini Series of rotating mixers provide a wide range of mixing capabilities. Suitable for an array of laboratory applications including resuspension, protein binding, nucleic acid purification, etc. the mixers include interchangeable tube holders for accommodating all common tube sizes from 0.5 mL to 50 mL. The motion can be adjusted from vertical (end over end) mixing, to horizontal (rolling or hybridization style) mixing.

The Roto-Mini rotator is also available in a "Plus" configuration, providing the following additional features:

Specifications 

Item #s RFP2020 and RMP2024 are made in the USA! Click here for more made in America products!
 

PR1MA™ 3D Nutating Shaker with Variable Speed

• Adjustable speed & tilt for a wide range of applications
• Large 12 x 12 in. work surface
• Insta-TILT™ technology for instant adjustment to the tilt angle
• Dual platform accessory doubles work surface
• Cold room and incubator safe

The PR1MA™ 3D is designed to provide the precise speeds and tilt angles required for a broad range of molecular and biological mixing applications. The user can adjust both parameters to match the vessel size and the volume of liquid being mixed, yielding optimum results.
This model includes both flat and dimpled (autoclavable) mats for mixing a wide variety of tubes and other vessels.

Stacking platforms can be purchased as accessories, effectively doubling the usable surface area of each model. PR1MA™ 3D features a maintenance-free, brushless motor, capable of loads up to 4.4 lbs, and is safe for use in cold rooms and incubators.

Specifications