WR-96 Series

• 96-well, 8 x 12 format
• Holds 0.2ml PCR tubes, strip tubes, and plates (does not fit full skirted plates)
• Supplied with clear lift-off lids

WUR-96A

PCR Work-Up Rack fits PCR 0.2ml tubes, strip tubes or 96-well plates (including skirted plates). Polypropylene rack and lid click firmly for secure transportation and storage. Available in assorted colors: blue, green, yellow, violet and red.

WRI-4A

• Designed for convenience & versatility, this rack can be used while you are working or as a storage rack.
• It includes a lid and can accomodate 32 x 0.2 ml PCR tubes, 24 x 1.5/2.0 ml & 16 x 0.5 ml microtubes.
• Tube wells are alpha-numerically matrixed with raised bold type for quick identification.
  
• If you use cycle plates, 8 or 12 tube strips, or lage quantities of 0.2 ml PCR tubes, the WRI-4A is for you.
• Four retainer clips hold the tray firmly in place, yet allow fast and convenient removal when necessary.
• Available with a clear lid and five flourescent colors: blue, green, orange, pink, yellow, or assorted.

81-Well Freezer Storage Boxes with Lift-Off Lids

• 81-wells in 9 x 9 format
• Approximate dimensions 5" x 5" x 2" 
• Versatile storage from freezer to bench
• Stores tubes up to 2.0 mL
• Suitable for temperatures as low as -90°C
• Rugged polypropylene
• High-contrast alphanumeric indexing on lid

Replace your disposable cardboard boxes with these sturdy, reusable polypropylene storage boxes.

Accommodates 0.5, 1.5, and 2.0ml tubes and withstand temperatures as low as –90°C. Will easily fit standard freezer storage racks and drawers. Fits standard 2 inch freezer racks.

An alpha-numeric grid is hot stamped on the unit in clear, easy-to-read contrasting colors.

The telescoping style lids are clear with frosted I.D. panels on two sides and bases are available in natural, black, or assorted fluorescent colors.

This reversible rack comes with a simple-to-use removable hinged lid that snaps in place on either side of the rack. Rack and lid are molded out of autoclavable polypropylene. PCR® side of the rack has 168 wells that hold 0.2mL tubes. The wells will accommodate 8 or 12 tube strips or individual tubes. The opposite side of the rack has 40 wells that hold 0.5mL tubes. We have also placed 12 wells for 1.5mL tubes on both sides of the rack for your convenience. Available in natural or assorted colors (blue, green, purple, yellow, and orange). Packs of 5. PCR® is a registered trademark of Hoffman-LaRoche Inc.

The PolarSafe cryogenic 2D vials, available in 2 and 5 mL sizes with internally or externally threaded caps, are idea for rapid processing of biological samples. The embedded Datamatrix code at the bottom of each vial along with the corresponding "Code 128" barcode on the body of the vial, saves time and provides accurate organization and tracking of valuable samples.

The 2D vials can be safely stored in polycarbonate boxes (purchase separately). The storage boxes also feature the 2D Datamatrix code and Code 128 barcode to provide automatic identification of both the box and stored vials.

CoolCaddy™ PCR Work Station

• Maintains 2 to 4° C for up to 5 hours
• Keeps samples cool, but not frozen
• Accomodates several different vessel types: Vials, Tubes, Strips, Plates & Reservoirs

Protect your enzymes, reagents and temperature sensitive samples with the new 5-hour CoolCaddy™.  No need for messy ice baths - simply store it overnight in any standard freezer and its ready to hold tubes, plates and reservoirs at 2 to 4° C for an entire morning or afternoon.  CoolCaddy™ is an ideal work station for PCR and especially for any protocol requiring multi-channel pipetting from a reservoir into strip tubes or 96 well plates.  And, if your work is interrupted, just place the whole CoolCaddy™ (complete with samples and reagents) back in the freezer or refrigerator until you are able to resume your experiment.

The CoolCaddy™ offers the highest level of enzyme protection and is essential for all protocols that call for more than 30 minutes of benchtop prep work.  Additionally, the proprietary refrigerant gel protects enzymes, samples and reagents from freezer fluctuations caused by power outages, open doors, and frost-free cycles.

Capacity:
 

ROTA-RACK® MICROTUBE RACK
Get organized with this fun, interlocked rack.
Rotate each of the four modules independently to configure for the tubes that you want to use.

• Made from polypropylene
• Suitable for a massive variety of culture, centrifuge, micro centrifuge, round, flat or conical bottomed tubes
• Polypropylene rack maintains its orientation until you twist it again.
• Two versions to cover smaller and larger tube requirements
• Tubes: 15 mL  Wells: 6  Well Dia: 16.4 mm
• Tubes: 1.5/2.0 mL  Wells: 9  Well Dia: 11.2 mm
• Tubes: .5 mL  Wells: 12  Well Dia: 8 mm
• Tubes: .2 mL  Wells: 32  Well Dia: 6.5 mm
• Dimensions: 8.81 x 4.33 x 4.33 in (21 x 10 x 10 cm)
• 1/pk
• Color: purple, blue, green, yellow
• Autoclavable

Features

• Maintains a sample temperature of less than 4ºC for almost 4 hours (with lid on rack) when used at room temperature.
• Color-change materia enables you to see how cold your samples are at a glance.
• IsoFreeze® color change racks undergo a dramatic change to a contrasting color at 7ºC.

IsoFreeze MCT (5630)

• Dimensions: 146 × 105 × 70 mm.
• Tube capacity: 24 x 0.5, 1.5, 2.0 mL snap or screw-cap style tubes.
• Rack comes with lid.

IsoFreeze PCR & qPCR Racks (5640)

• Tube and plate capacity:
• qPCR: 64 x 0.1 mL Corbett Rotor-Gene tubes, 16 x 0.2 mL tubes or strips, and 4 x 0.5 mL tubes.
• PCR: 96 x 0.1 and 0.2 mL tubes and strip tubes; plates up to 96-well.
• Dimensions: 141 × 99 × 44 mm.

IsoFreeze PCR, SBS (5650)

• SBS footprint for use with liquid handing equipment.
• Accomodates 96-well PCR plates, strip tubes, or 0.2 mL tubes.
• Rack does not come with lid.

Leave the Ice Buckets Behind!
IsoFreeze Color-Changing Racks take the guesswork out of sample preparation.

• Maintain sample temperature below 4ºC for up to 3 hour (with lid on, at room temperature).

• Available in two temperature ranges
• These racks will provide consistent thermal protection for extended periods.
• TFL-0 will Hold 0° Celsius for a minimum of 5 hours.
• TFL-20 will hold between -10 and -20 ° Celsius for up to 3 hours
• Made of virtually unbreakable polycarbonate
• Both units are filled with a non-toxic gel, are stackable
• Will accommodate up to 20 x 1.5/2.0ml micro or screw cap tubes, or 20 x 0.5ml tubes on the reverse side, flip side

PR1MA™ Cryo Tube Aluminum Cooler Rack

• Keep Cryo Tubes cold on the bench
• Non-Skid rubber feet provide a stable platform for loading samples
• Gets cold in as few as 25 minutes
• Samples stay cold on your bench top for up to an hour
• Small footprint minimizes bench top and freezer space used
• Precisely drilled wells allow for maximum heat transfer between the block and samples