S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
ContainerSeal™ Sealing Tape
ContainerSeal™ is a sealing tape designed for the vast range of bottles and containers used in laboratory applications. Its unique elastomeric characteristics allow it to stretch and conform around the irregular perimeters of containers lids and covers to form a tight seal. ContainerSeal™ will block water vapor loss, reduce the rate of gas exchange and prevent the entry of contaminants and can be easily removed from most surfaces without leaving adhesive residue.
Specifications
| Length | 1,296 In. | 32.92 mm |
| Width | 0.75 In. | 19.05 |
| Color | Yellow |
| U of M | Roll |
Proudly made in the USA! Click here for more made in America products!
1 x 8 FilmStrips™
For Sealing Only One 8-well Row of a 96-well Plate.
Designed for use with either 1×8 strip-well ELISA plates or standard 96-well plates where rows must be selectively protected or accessed. Ideal for COVID-19 testing to seal a row of 8 wells after swabs are deposited into a deep-well plate.- Certified DNase- & RNase- free
- A pliable polypropylene film minimizes aerosols upon removal
- Each sheet contains 8 strips on a continuous liner for ease of use
- Apply individually or two-at-a-time
- Use as a secondary film to seal previously pierced wells or to prevent accidental pipetting
- General laboratory use
- Incubation
- ELISA
AbsorbMax™ Black Vinyl Sealing Film
AbsorbMax™ is a black vinyl sealing film for black microplaes that can be applied to either the top or bottom of the plate.- Minimizes background fluorescence and cross talk between plate wells
- Ideal as a back seal for black plates with clear well bottoms for top reading measurements
- Absorbs stray light, reducing the background caused by light scatter
- Protects light sensitive samples from degradation
- Features a single split liner for easy application
Applications
- Fluorescence assays
- Light sensitive sample protection
Temp. Range
- -40°C to +80°C
Proudly made in the USA! Click here for more made in America products!
BrightMax™ Sealing Film
White, light-reflecting, vinyl sealing film designed for use with white microplates.
- The light reflective properties on clear-bottom plates maximize the sensitivity of bioluminescence and chemiluminescence assays in bottom-reading luminometers
- Maximizes intensity and signal-to-noise ratios in luminescence assays
- May be used as a backing matrix for microscopy of punch-out samples for filter plates (e.g. ELISPOT assays)
- Features a single split liner for easy application
Applications
- Luminescence
- Fluorescence
- Microscopy
- -40°C to +80°C
Proudly made in the USA! Click here for more made in America products!
Plate-Sealing Roller
Application: Plate-sealingMaterial: Rubber, metal
The plate-sealing roller features a smooth spinning, thermoplastic elastomer sealing surface with a durable plated metal handle.
- Reusable, autoclavable
- Provides a large 4 inch (10.16 cm) wide sealing surface
- A 10 minute or greater dwell me at room temperature before processing increases the film-to-plate bond
Proudly made in the USA! Click here for more made in America products!
Film-Sealing Paddles
- Sealing paddles complete the application of sealing films
- Press the film with the sealing paddle to assure a secure uniform seal around all wells of a microplate
- Paddles fit within the edge of raised-rim plates
- Sealing Roller completes the application of sealing films
- Press the film with the accessory plate roller assure a secure uniform seal around all wells of a microplate
Proudly made in the USA! Click here for more made in America products!
Multi-Swipe™ Plate-Sealing Paddles
For sealing flat-top and raised-rim plates.
Application: Plate-sealing
Material: Polyethylene
The Multi-Swipe plate-sealing paddle ensures a secure and uniform, pressure-sensitive seal around all wells and is an economical alternative to plate rollers. Plate-sealing paddles are designed for use with all plate types.
- Reusable, recyclable
- The semi-soft, pliable sealing surfaces prevent the film/foil from being torn or ripped
- The non-flat contoured side is designed to go down to the plate; the center raised textured surface provides a non-slip finger hold
- Features two sealing surfaces: the shorter length fits inside the walls of raised-rim plates; the longer length is ideal for flat-top and deep-well plates
- Features two unique sized corner radii: 1/8 inch (0.3175 centimeter) and 1/16 inch (0.1588 centimeter) to seal around the plate perimeter; the tighter radii is for use with raised-rim PCR plates
Helpful Tips
- The printed side is used to seal the film to the plate
- Multiple swipes of the sealing paddle in both directions is highly recommended
- A 10 minute or greater dwell time at room temperature before processing increases the film-to-plate bond
Proudly made in the USA! Click here for more made in America products!
MyView™ Compact UV Transilluminator
- Uniform Illumination | Four 302 nm Bulbs
- Adjustable UV Safety Cover | Easy Access to Gels
- Large Scratch Resistant Viewing | 16.5 x 13.5 cm
The E3100 Compact UV Transilluminator has a surprisingly small footprint (just over 12 x 8 In.) yet provides industry leading performance. It will accommodate one or two mini gels on the 16.5 x 13.5 cm scratch resistant viewing surface.
The integrated UV blocking cover is made from a polymer that will not fluoresce in UV light. This allows clear viewing of DNA bands through the cover yet offers full UV blocking protection. Two friction hinges on the front edge of the cover allow for full adjustment. Position the cover horizontally for general viewing, tilt it at an angle for gel access and band cutting, or open fully to use the SmartDoc™ Imaging Enclosure (sold separately) for gel imaging with a smartphone.
The transilluminator’s four 6W bulbs evenly illuminate the viewing surface, and the 302 nm wavelength is ideal for Ethidium Bromide, SmartGlow™, SYBR Green®, Gel Green™ and many other common gel stains. Spacing of the UV bulbs, coupled with a reflector system and special diffusing filter glass provides exceptional uniformity across the viewing surface. This allows for quantification of DNA and higher quality imaging when used with a camera system.
Specifications
| Light source 4 x 6W UV Light Bulbs | 4 x 6W UV Light Bulbs |
| Safety cover UV blocking polycarbonate | UV blocking polycarbonate |
| Exterior dimensions | 10 x 8 x 2.75 In. | 25.4 x 20.32 x 6.99 cm |
| Electrical | 12VDC (AC power adapter included) |
| Output wavelength | Peak at 302 nm |
| Viewing surface | 6.5 x 5.3 In. | 16.5 x 13.5 cm |
| Weight | 2 lbs. | 0.9 kg. |
| Warranty | 2 years |
Item # E3100 is proudly made in the USA! Click here for more made in America products!
Cool Safe Sample Chill System
- Versatile - Designed for 0.2ml tubes (strips or trays), 96-well and 384-well microplates, 0.5 mL, 1.5 mL, 5 mL tubes.
- Specially Formulated - Cool Bricks maintain a constant temperature (1°C or 10°C) for up to 10 hours.
- Quality Engineering - Each aluminum Cool Chamber surrounds tubes to guarantee sustained cold temperatures.
- Durable - The CoolSafe box is made of triple density expanded polystyrene and molded under extreme pressure creating a durable container that guarantees temperature stability.
- Easy To Use - Easily interchange Cool Chambers and Cool Bricks for different sized tubes.
Proudly made in the USA! Click here for more made in America products!
Labcon 24 and 48 Place Bench Top Racks
- Hold 1.5 mL, 1.7 mL, and 2.0 mL microtubes
- Freezable (-190°C) and autoclavable (122°C)
- Racks float in water baths
Labcon 24-Place and 48-Place micro centrifuge tube and cryo-vial storage system. For 1.5 mL and 2.0 mL tubes. These racks fit into Labcon pipette tip boxes and are made of recycled plastic. Fully autoclavable (122°C) and freezable (-190°C). Stackable racks float in your water bath and can incorporate dry ice for use with frozen samples on the bench.
Specifications
| Material | 100% Polypropylene |
| Grade | Medical |
| Rating | USP Class VI |
| Color | White |
| Length | Various |
| Fits | 1.5 to 2 mL Tubes |
| Approved Use | Medical, Research, Industrial, Food and Beverage |
Proudly made in the USA! Click here for more made in America products!
1,000 uL Wide Bore Tips
- Larger opening prevents cell fragmentation due to shearing.
- Ideal for pipetting of macromolecules and viscous samples.
- Inside diameter at tip end is 0.06 inch (1.6 mm).
- For use in pharmaceutical industry, food industry, and molecular biology.
- Manufactured from high-quality, virgin polypropylene to ensure purity and provide excellent optical clarity.
- Certified free of detectable RNase, DNase, DNA, PCR inhibitors, and tested pyrogen-free. Sterile product is certified endotoxin-free.
Proudly made in the USA! Click here for more made in America products!
200 uL Wide Bore Tips
- Larger opening prevents cell fragmentation due to shearing.
- Ideal for pipetting of macromolecules and viscous samples.
- Inside diameter at tip end is 0.06 inch (1.6 mm).
- For use in pharmaceutical and food industry, and molecular biology.
- Manufactured from high-quality, virgin polypropylene to ensure purity and provide excellent optical clarity.
- Certified free of detectable RNase, DNase, DNA, PCR inhibitors, and tested pyrogen-free. Sterile product is certified endotoxin-free
Proudly made in the USA! Click here for more made in America products!
Web Content Viewer
Actions