S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
eXTReme™ 2 Seal Extra Strong Sealing Film
Extra strong adhesive minimizes evaporation without residue eXTReme™ Seal features an extra-strong thick adhesive to minimize evaporation, yet removes easily without leaving residue on the plate.
Application: PCR and robotics
Temp. Range: -20°C to +120°C
Product Info
Proudly made in the USA! Click here for more made in America products!
Application: PCR and robotics
Temp. Range: -20°C to +120°C
Product Info
- Features chamfered corners to eliminate plate overhang for robotics applications and tight storage conditions.
- Certified DNase- & RNase- free
- Next-generation adhesive formula provides better than-ever sample protection with improved evaporation rates
- Standard cut is ideal for use with raised-rim and non-skirted PCR plates
- Large cut is designed for greater plate coverage and easier positioning of the film to the plate
- Large cut is recommended for use with flat-top, semi skirted and full-skirted PCR plates as well as deep well plates
Proudly made in the USA! Click here for more made in America products!
AlumaSeal® II™ Easy-to-pierce Aluminum Foil Seal
Easy-to-pierce, Medical Grade Acrylic Adhesive.
AlumaSeal® II™ is a soft, non-permeable aluminum foil with a strong, medical-grade acrylic adhesive. Compared to other aluminum foils, AlumaSeal® II™ has less tendency to roll back on itself when removing the backing paper.
- Certified DNase- & RNase- free
- Excellent chemical resistance (e.g. DMSO)
- Easily pierceable with single or multichannel pipettors and robotic probes
- 1.4mil conformable aluminum foil allows visual verification of the seal’s security around each well
Applications
- PCR
- Long-term storage
- Light sensitive assays
- Robotics
Temperature Range
- -80°C to +120°C
Helpful Tips
- End-tab removal before thermal cycling is highly recommended
- Remove diagonally from a corner to prevent tearing
Proudly made in the USA! Click here for more made in America products!
FoilSeal™
Extra thick aluminum foil minimizes shredding upon removal
FoilSeal features a specially formulated adhesive that provides an excellent seal to minimize evaporation, reduce cross-contamination and prevent spillage.
Application: PCR, light sensitive assays and robotics
Temp. Range: -20°C to +120°C
Proudly made in the USA! Click here for more made in America products!
Universal fit for all plate types (e.g. flat-top, raised-rim and non-skirted); the smaller dimensions and rounded corners result in no plate overhang for robotics applications.
- Certified DNase- & RNase- free
- Pierceable with a pipet tip or robotic probe for direct sample recovery
- 2.0mil aluminum foil removes easily without shredding or tearing
- The conformable nature of foil allows for the visual verification of the seal’s security around each well
- Not recommended for long-term storage
Helpful Tips
- Remove diagonally from a corner to prevent tearing
Proudly made in the USA! Click here for more made in America products!
Item#:
ASFOILSEALTM
ThermalSeal® RTS™ Silicone Sealing Film
Optically Clear, Pressure Activated, Non-tacky Silicone.
The silicone adhesive is non-tacky until pressure is applied to the sealing surface which then creates a secure bond around the wells and perimeter of the plate. Also ideal for dry samples (e.g. soil, seeds, insects, etc.) because the non-activated adhesive above the wells remains non-tacky. A roller or sealing paddle is highly recommended for use with this product to ensure consistent and adequate pressure is applied during the sealing process.
Proudly made in the USA! Click here for more made in America products!
The silicone adhesive is non-tacky until pressure is applied to the sealing surface which then creates a secure bond around the wells and perimeter of the plate. Also ideal for dry samples (e.g. soil, seeds, insects, etc.) because the non-activated adhesive above the wells remains non-tacky. A roller or sealing paddle is highly recommended for use with this product to ensure consistent and adequate pressure is applied during the sealing process.
- Provides an extremely strong seal to minimize evaporation
- Certified DNase- & RNase- free
- Chemically resistant to DMSO, acetonitrile, and methanol
- Ideal for use with flat-top, raised-rim and non-skirted PCR plates
- High optical clarity and low auto-fluorescence
- Available in roll format for automation: ThermalSeal® RTS™ Roll-Seal
- A complimentary sealing paddle is included in each box
Applications
- qPCR
- Long-term storage
- Protein crystallography
- HPLC
- -80°C to +105°C
Helpful Tips
- Sufficient pressure must be applied to activate the silicone adhesive
- Multiple swipes of the sealing paddle in both directions is highly recommended
- A 10 minute or greater wait period before thermal cycling increases the film-to-plate bond
Proudly made in the USA! Click here for more made in America products!
Click to shop new and improved eXTReme™ 2 Seal Extra Strong Sealing Film
eXTReme™ Seal Extra Strong Sealing Film
eXTReme™ Seal features an extra-strong thick adhesive to minimize evaporation, yet removes easily without leaving residue on the plate.
Features chamfered corners to eliminate plate overhang for robotics applications and tight storage conditions.
- Certified DNase- & RNase- free
- Ideal for use with raised-rim and non-skirted PCR plates
- Available in a larger cut for flat-top semi-skirted and full-skirted PCR plates: eXTReme™ Seal, Large
Application
- PCR
- Robotics
- -20°C to +120°C
Helpful Tips
- Selection of the proper film size will minimize evaporation
- The film should not overhang or ride up the wall of a raised-rim plate
- More complete coverage of skirted flat-top plates will reduce evaporation in the outer wells
- End-tab removal before thermal cycling is highly recommended
Proudly made in the USA! Click here for more made in America products!
ThermalSeal® RT2™ Sealing Film
Optically Transparent, Highly Conformable Adhesive, Polyester Sealing Film.
Designed for use with standard 96-well plates where rows
must be selectively protected or accessed. Available in a smaller cut for raised-rim and non-skirted PCR plates: ThermalSeal® RT2RR
- Certified DNase- & RNase- free
- Ultra-high optical clarity
- Minimizes evaporation and cross-contamination
- Ideal for use with flat-top and hard-shell dual component (e.g. polycarbonate / polypropylene) PCR plates
- Not recommended for removal after thermal cycling
Application
- qPCR
- -40°C to +120°C
Helpful Tips
- Selection of the proper film size will minimize evaporation
- The film should not overhang or ride up the wall of a raised-rim plate
- More complete coverage of skirted flat-top plates will reduce evaporation in the outer wells
- End-tab removal before thermal cycling is highly recommended
Proudly made in the USA! Click here for more made in America products!
DuraSeal™ Sealing Film
- Durable, heat-resistant, solvent-proof laboratory sealing film
- Chemically resistant
- Heat resistant & Microwave compatible
- Tight sealing
- Tear resistant
DuraSeal™ is easy to use. There is no inter-leaf paper to strip away, just stretch the film symmetrically over a container opening and the 1.5 mil thick film contracts inwardly around the opening or neck of the container to provide a drum-tight, water-proof seal. The film can be elongated 500-800% before breakage. The film clings to itself, especially after stretching so the free edges of the film may be stretched around the container to secure the container edges.
Permeability Information
- Oxygen = 125cc/100in2/24hrs at 23°C
- Carbon Dioxide = 1300cc/100in2/24hrs at 23°C
- Water Vapor = 1.0g/100in2/24hrs at 38°C and 90% R.H.
Proudly made in the USA! Click here for more made in America products!
Item#:
ASSEAL2
ContainerSeal™ Sealing Tape
ContainerSeal™ is a sealing tape designed for the vast range of bottles and containers used in laboratory applications. Its unique elastomeric characteristics allow it to stretch and conform around the irregular perimeters of containers lids and covers to form a tight seal. ContainerSeal™ will block water vapor loss, reduce the rate of gas exchange and prevent the entry of contaminants and can be easily removed from most surfaces without leaving adhesive residue.
Specifications
| Length | 1,296 In. | 32.92 mm |
| Width | 0.75 In. | 19.05 mm |
| Color | Yellow |
| U of M | Roll |
Proudly made in the USA! Click here for more made in America products!
Item#:
ASSEAL1
Hoefer® Chroma Deluxe Dual Cool Vertical Protein Electrophoresis System
Ergonomic design offers easier handling and sample introduction.
- Maximum glass plate size 18 x 16 cm
- Gels are fully submerged for greater temperature equilibration
- Produces straight lanes and sharp, well-defined bands
- Run up to four gels (maximum 112 samples) at one time under identical conditions
- Accommodates denaturing and native polyacrylamide gels, and the second dimension of 2-D electrophoresis
- Run gels at uniform temperature from 1 to 45°C
- A wide array of accessories enables you to tailor gel configurations to your needs
Hoefer® Chroma Deluxe Complete Unit (SE600X-15-15)
- Lower Buffer Chamber, 1/ea
- Upper Buffer Chamber, 1/ea
- Safety Lid w/High Voltage Leads, 1/ea
- Heat Exchanger, 1/ea
- Glass Plates 18 x 16 cm, 6/pk
- Clamp Assemblies, 16 cm, 4/pk
- Cams, 6/pk
- Slotted Gaskets for Upper Buffer Chamber, 2/pk
- Dual Gel Casting Stand with Leveling Base, 1/ea
- Bubble Level, 1/ea
- Laminated Gaskets for Caster, 2/pk
- Buffer Dam, 1/ea
- Spacer-Mate Alignment Template, 1/ea
- Wonder Wedge Plate Separation Tool, 1/ea
- Gel Seal, 1/ea
- Combs, 15-well, 1.5 mm thick, 2/pk
- Spacers, 1.5 mm thick, 2 cm wide, 4pk
Hoefer® Chroma Deluxe Basic Unit (SE600X)
The same as above without the combs and spacers. Order two SE511 combs and two sets of 16 cm long spacers separately.
Specifications
| Plate Size (W x H) | 7.09 x 6.30, or 7.09 x 3.15 In. 18 x 16 or 18 x 8 cm |
| Spacers | 0.75 mm, 1.0 mm, 1.5 mm |
| Max. Power | 1000 V, 500 mA, 50 W |
| Max. Temp. | 113ºF | 45°C |
| Indoor Use | 39.2 to 104ºF | 4 to 40°C |
| Humidity | Up to 80% |
| Dims (D x W x H) | 5.51 x 12.60 x 11.42 In. | 14 x 32 x 29 cm |
| Weight | 16.98 lb | 7.70 kg |
Proudly made in the USA! Click here for more made in America products!
Item#:
ASHOFRSE600XES
1 x 8 FilmStrips™
For Sealing Only One 8-well Row of a 96-well Plate.
Designed for use with either 1×8 strip-well ELISA plates or standard 96-well plates where rows must be selectively protected or accessed. Ideal for COVID-19 testing to seal a row of 8 wells after swabs are deposited into a deep-well plate.- Certified DNase- & RNase- free
- A pliable polypropylene film minimizes aerosols upon removal
- Each sheet contains 8 strips on a continuous liner for ease of use
- Apply individually or two-at-a-time
- Use as a secondary film to seal previously pierced wells or to prevent accidental pipetting
Applications
- General laboratory use
- Incubation
- ELISA
Item#:
AS1X8FILMSTRIPS
Hoefer® Tall Standard Dual Cool Vertical Protein Electrophoresis System
Taller vertical format accommodates 24 cm long gels for increased resolution.
- Maximum glass plate size 18 x 24 cm
- Produce straight lanes and sharp, well-defined bands
- Run up to four gels (maximum 112 samples) at one time under identical conditions
- Run gels at uniform temperature from 1 to 45°C
- Accommodates denaturing and native polyacrylamide gels and 2-D electrophoresis
- A wide array of accessories allows you to tailor gel configurations to your needs
Hoefer® Tall Standard Complete Unit (SE660-15-15)
- Lower Buffer Chamber, 1/ea
- Upper Buffer Chamber, 1/ea
- Safety Lid w/High Voltage Leads, 1/ea
- Heat Exchanger, 1/ea
- Glass Plates 18 x 24 cm, 6/pk
- Clamp Assemblies, 8 cm, 4/pk
- Clamp Assemblies, 16 cm, 4/pk
- Cams, 6/pk
- Slotted Gaskets for Upper Buffer Chamber, 2/pk
- Dual Gel Casting Stand with Leveling Base, 1/ea
- Bubble Level, 1/ea
- Laminated Gaskets for Caster, 2/pk
- Buffer Dam, 1/ea
- Spacer-Mate-Alignment Template, 1/ea
- Wonder Wedge™-Plate Separation Tool, 1/ea
- Gel Seal, 1/ea
- Combs, 15-well, 1.5 mm thick, 2/pk
- Spacers, 1.5 mm thick (2 cm wide), 4/pk
- Lower Buffer Chamber, 1/ea
Hoefer® Tall Standard Basic Unit (SE660)
The same as above without the combs and spacers. Order two SE511 combs and two sets of 24 cm long spacers separately.
Specifications
| Plate Size (W x H) | 7.09 x 9.45, 7.09 x 6.30, or 7.09 x 3.15 In. 18 x 24, 18 x 16 or 18 x 8 cm |
| Spacers | 0.75 mm, 1.0 mm, 1.5 mm |
| Max. Power | 1000 V, 500 mA, 50 W |
| Max. Temp. | 113ºF | 45°C |
| Indoor Use | 39.2 to 104ºF | 4 to 40°C |
| Humidity | Up to 80% |
| Dims (D x W x H) | 5.51 x 12.60 x 14.57 In. | 14 x 32 x 37 cm |
| Weight | 19.40 lb | 8.80 kg |
Proudly made in the USA! Click here for more made in America products!
Item#:
ASHOFRSE660ES
Hoefer® Standard Dual Cooled Vertical Protein Electrophoresis System
Standard vertical format for 18 cm long gels.
- Maximum glass plate size 18 x 16 cm
- Produce straight lanes and sharp, well-defined bands
- Run up to four gels (maximum 112 samples) at one time under identical conditions
- Run gels at uniform temperature from 1 to 45°C
- Accommodates denaturing and native polyacrylamide gels and 2-D electrophoresis
- A wide array of accessories allows you to tailor gel configurations to your needs
Hoefer® Standard Complete Unit (SE600-15-15)
- Lower Buffer Chamber, 1/ea
- Upper Buffer Chamber, 1/ea
- Safety Lid w/High Voltage Leads, 1/ea
- Heat Exchanger, 1/ea
- Glass Plates 18 x 16 cm, 6/pk
- Clamp Assemblies, 16 cm, 4/pk
- Cams, 6/pk
- Slotted Gaskets for Upper Buffer Chamber, 2/pk
- Dual Gel Casting Stand with Leveling Base, 1/ea
- Bubble Level, 1/ea
- Laminated Gaskets for Caster, 2/pk
- Buffer Dam, 1/ea
- Spacer-Mate Alignment Template, 1/ea
- Wonder Wedge Plate Separation Tool, 1/ea
- Gel Seal, 1/ea
- Combs, 15-well, 1.5 mm thick, 2/pk
- Spacers, 1.5 mm thick, 2 cm wide, 4/pk
Hoefer® Standard Basic Unit (SE600)
The same as above without the combs and spacers. Order two SE511 combs and two sets of 16 cm long spacers separately.
Specifications
| Plate Size (W x H) | 7.09 x 6.30, or 7.09 x 3.15 In. 18 x 16 or 18 x 8 cm |
| Spacers | 0.75 mm, 1.0 mm, 1.5 mm |
| Max. Power | 1000 V, 500 mA, 50 W |
| Max. Temp. | 113ºF | 45°C |
| Indoor Use | 39.2 to 104ºF | 4 to 40°C |
| Humidity | Up to 80% |
| Dims (D x W x H) | 5.51 x 12.60 x 11.42 In. | 14 x 32 x 29 cm |
| Weight | 15.43 lb | 7.00 kg |
Proudly made in the USA! Click here for more made in America products!
Item#:
ASHOFRSE600ES
Web Content Viewer
Actions