S2K Commerce - Products Dropdown
ActionsS2K Commerce - Shopping Cart
ActionsS2K Commerce - Order Entry
ActionsSpecifications
Length | 141.27 mm |
Length (w/ end tabs removed) | 117.5 mm |
Width | 77.8 mm |
Overall Thickness | 2.8 mil |
Adhesive Thickness | 2.0 mil |
Material | Polyester |
Adhesive | Encapsulated Silicone |
Max. Temperature | 120 °C |
Min. Temperature | -40 °C |
Primary Usages | Real Time PCR (qPCR), PCR |
Please know that the manufacturer has suspended manufacturing this product indefinitely.
We suggest purchasing PR1MA PCR Plastics.
Contact your rep or email tech@midsci.com for more information.
Platemax CyclerSeal Sealing Film
- Provides exceptional seal to safeguard samples during transport or storage
- Eliminates well to well contamination and cross-over in PCR applications when used with Axygen's compression mat
- Polypropylene film is wide temperature range compatible, -40° to 104°C
- PCR-TS is designed for ELISA/EIA applications
- PCR-TS-900 is twice as thick (as PCR-TS) and is suitable for water-bath and other difficult PCR applications
- Provides exceptional seal under the widest temperature conditions and reagents
- Wide temperature range compatible, -80° to 104°C
- Ideal for light sensitive samples and PCR or storage
- Uniform adhesive provides optimum well sealing
- PCR-AS-200 is pierceable
- 100 films/pack
1x8 FilmStrips™ for Sealing Only One 8-well Row of a 96-well Plate
Designed for use with either 1×8 strip-well ELISA plates or standard 96-well plates where rows must be selectively protected or accessed. Ideal for COVID-19 testing to seal a row of 8 wells after swabs are deposited into a deep-well plate.- Certified DNase- & RNase- free
- A pliable polypropylene film minimizes aerosols upon removal
- Each sheet contains 8 strips on a continuous liner for ease of use
- Apply individually or two-at-a-time
- Use as a secondary film to seal previously pierced wells or to prevent accidental pipetting
- General laboratory use
- Incubation
- ELISA
- -40°C to +120°C
Soft and non-permeable, the 1.4 mil aluminum sealing foil offers optimum sealing for all PCR plates. Using a medical-grade acrylic adhesive, our foil seals are easily pierced with single or multi-channel pipettors and robotic probes. These soft foil seals, resist rolling back when removing the backing paper and seal tightly to both PCR and Deep Well Blocks.
Ideally suited for PCR and Cold Storage down to -80 °C. Exceptional adhesive properties and foil material durability yield virtually no sample evaporation or drying.
Certified free of RNase, DNase, Pyrogen, and nucleic-acid contamination.
Length |
133.35 mm |
Length (w/ end tabs removed) |
120.65 mm |
Width |
80.01 mm |
Overall Thickness |
1.4 mil |
Adhesive Thickness |
1.1 mil |
Material |
Aluminum |
Adhesive |
Medical Grade Acrylic |
Max. Temperature |
120 °C |
Min. Temperature |
-80 °C |
Primary Usages |
Storage or Sample Cover |
PCR SILICONE SEALING MAT - 96
- Made of research-grade silicone
- Scored wells for sample access
- Perforations re-seal after access
- Resists coring and tearing
- Eliminates cross-talk between wells
- Also works as a compression mat
- Suitable for standard PCR thermocycling
- Mats can be reused
- For use with 96-well PCR plates
- Printed alpha numeric grid for easy reference
- Certified to be free of RNase, DNase, DNA, PCR inhibitors, and Pyrogen contamination.
Works as a plate seal (to eliminate cross contamination) and compression mat all-in-one!
Our compression molded 96-round plug, silicone sealing mats for PCR plates minimize sample evaporation in a wide range of temperatures. These mats are chemically resistant and reusable; containing no adhesives or extractables to contaminate samples. Made of research-grade silicone, they can be autoclaved, and following a 10% bleach wash and ethanol rinse protocol may be reused.
Wells are scored (cut 80% of the way through, but not all of the way) to allow for sample access via pipettor, syringe, or probe. These scored perforations will seal themselves, after penetration, ensuring an airtight closure to the well.These Rotocycler strips are perfectly designed to perform on Rotor-Gene instruments. Tube strips are packaged separately from cap strips. The frosted extensions on caps not only make them more efficient and secure during handling but also offer a convenient area for labeling. For individual use, tube and cap strips can easily be separated and used as individual units.
These optically clear polyester films are ideally suited for Real Time PCR (qPCR). They feature an inert, ultra-clear, and strong encapsulated silicone adhesive that provides extraordinary performance in real-time PCR applications.
Encapsulated silicone greatly reduces the risk of sample contamination due to exposure to adhesive. Once the film is pressed onto the plate, the raised portion of the well penetrates the encapsulation and a tight seal is formed on just that surface (not over the sample). This silicone seal adheres aggressively and diminishes the possibility of "Edge Effect".
The plasticized backing of this film is scored on both ends to allow for two handed (precise) placement on the plate. Both film and adhesive maintain incredible clarity and are the choice for highly demanding manual and automated processes.
Certified free of RNase, DNase, Pyrogen, and nucleic-acid contamination.
Length |
141.27 mm |
Length (w/ end tabs removed) |
117.5 mm |
Width |
77.8 mm |
Overall Thickness |
2.8 mil |
Adhesive Thickness |
2.0 mil |
Material |
Polyester |
Adhesive |
Encapsulated Silicone |
Max. Temperature |
120 °C |
Min. Temperature |
-40 °C |
Primary Usages |
Real Time PCR (qPCR), PCR |
The polyester films are a great general purpose seal; ideal for sample protection and elimination of well-to-well sample cross contamination. The acrylic adhesive offers a strong bond that seals tightly on polypropylene and polystyrene plates.
This seal is ideally suited for short term storage, Elisa assays, prevention of sample loss, and general lab usage.
The paper backing of this film is scored on both ends to allow for two handed (precise) placement on the plate.
For PCR applications see our standard PCR film or our Real Time PCR film.
For applications where accessing samples through the seal with pipet tips or a probe is required, see the pierceable aluminum (MID-PCR-200) film.
Certified free of RNase, DNase, Pyrogen, and nucleic-acid contamination.
Length |
146.05 mm |
Length (w/ end tabs removed) |
119.05 mm |
Width |
79.38 mm |
Overall Thickness |
3.1 mil |
Adhesive Thickness |
1.1 mil |
Material |
Polyester |
Adhesive |
Medical Grade Acrylic |
Max. Temperature |
120 °C |
Min. Temperature |
-40 °C |
Primary Usages |
Elisa, Storage or Sample Cover |