|◀ 121 - 132 of 143 ▶|
View:
For More Secure Seal to Minimize Evaporation

General Purpose Sealing Film For a More Secure Seal to Minimize Evaporation

General Purpose polypropylene films offer superior barrier properties to minimize evaporation and prevent well-to-well contamination. Ideal for use with polypropylene plates.
  • Certified DNase- & RNase- free
  • Features good chemical resistance
  • Provides a very secure seal to minimize evaporation, but is slightly harder to remove than SealPlate films
  • Less rigid polypropylene film reduces aerosols upon removal
  • Specially formulated adhesive minimizes plate residue
  • Can be used as a temporary seal while awaiting further processing
Applications
  • General laboratory use
  • Short-term storage
  • Incubation
  • ELISA
Temperature Range
  • -40°C to +120°C
Industry Standard for Sample Protection

SealPlate® Sealing Film - The Industry Standard for Sample Protection

SealPlate® minimizes evaporation, prevents well-to-well contamination and spillage. Eliminates the “edge effect” which can occur with plate lids (e.g. greater evaporation in the outside plate wells).

  • Provides a secure seal and is easy to remove
  • Rigid polyester film features good clarity and easy handling
  • Can be used as a temporary economical seal while awaiting further processing
  • Features two end-tabs with perforations

Applications

  • General laboratory use
  • Short-term storage
  • Incubation
  • ELISA
Temperature Range
  • -40°C to +120°C

Thick Adhesive, Leaves No Residue Behind
eXTReme™ 2 Seal Extra Strong Sealing Film

Extra strong adhesive minimizes evaporation without residue eXTReme Seal features an extra-strong thick adhesive to minimize evaporation, yet removes easily without leaving residue on the plate.
Application: PCR and robotics
Temperature Range: -20°C to +120°C
 
Product Info
  • Features chamfered corners to eliminate plate overhang for robotics applications and tight storage conditions.
  • Certified DNase- & RNase- free
  • Next-generation adhesive formula provides better than-ever sample protection with improved evaporation rates
  • Standard cut is ideal for use with raised-rim and non-skirted PCR plates
  • Large cut is designed for greater plate coverage and easier positioning of the film to the plate
  • Large cut is recommended for use with flat-top, semi skirted and full-skirted PCR plates as well as deep well plates
  • NOT recommended for qPCR
Easy-to-pierce, Medical Grade Acrylic Adhesive

AlumaSeal® II™ Easy-to-pierce Aluminum Foil Seal

AlumaSeal® II™ is a soft non-permeable aluminum foil with a strong, medical-grade acrylic adhesive. Compared to other aluminum foils, AlumaSeal® II™  has less tendency to roll back on itself when removing the backing paper.
  • Certified DNase- & RNase- free
  • Excellent chemical resistance (e.g. DMSO)
  • Easily pierceable with single or multichannel pipettors and robotic probes
  • 1.4mil conformable aluminum foil allows visual verification of the seal’s security around each well
Applications
  • PCR
  • Long-term storage
  • Light sensitive assays
  • Robotics
Temperature Range
  • -80°C to +120°C
Helpful Tips
  • End-tab removal before thermal cycling is highly recommended
  • Remove diagonally from a corner to prevent tearing

FoilSeal™


Extra thick aluminum foil minimizes shredding upon removal
 
FoilSeal features a specially formulated adhesive that provides an excellent seal to minimize evaporation, reduce cross-contamination and prevent spillage.

Application: PCR, light sensitive assays and robotics
Temperature Range: -20°C to +120°C

Universal fit for all plate types (e.g. flat-top, raised-rim and non-skirted); the smaller dimensions and rounded corners result in no plate overhang for robotics applications.

  • Certified DNase- & RNase- free
  • Pierceable with a pipet tip or robotic probe for direct sample recovery
  • 2.0mil aluminum foil removes easily without shredding or tearing
  • The conformable nature of foil allows for the visual verification of the seal’s security around each well
  • Not recommended for long-term storage
 
Helpful Tips:

  • Remove diagonally from a corner to prevent tearing
Optically Clear, Pressure Activated, Non-tacky Silicone

ThermalSeal® RTS™ Optically Clear, Pressure Activated, Non-tacky Silicone Adhesive

 
The silicone adhesive is non-tacky until pressure is applied to the sealing surface which then creates a secure bond around the wells and perimeter of the plate. Also ideal for dry samples (e.g. soil, seeds, insects, etc.) because the non-activated adhesive above the wells remains non-tacky. A roller or sealing paddle is highly recommended for use with this product to ensure consistent and adequate pressure is applied during the sealing process. 

  • Provides an extremely strong seal to minimize evaporation
  • Certified DNase- & RNase- free
  • Chemically resistant to DMSO, acetonitrile, and methanol
  • Ideal for use with flat-top, raised-rim and non-skirted PCR plates
  • High optical clarity and low auto-fluorescence
  • Available in roll format for automation: ThermalSeal® RTS™ Roll-Seal
  • A complimentary sealing paddle is included in each box

Applications

  • qPCR
  • Long-term storage
  • Protein crystallography
  • HPLC
Temperature Range
  • -80°C to +105°C

Helpful Tips

  • Sufficient pressure must be applied to activate the silicone adhesive
  • Multiple swipes of the sealing paddle in both directions is highly recommended
  • A 10 minute or greater wait period before thermal cycling increases the film-to-plate bond

Adhesive Sealing Film, Aluminum, 1.4 mil

Soft and non-permeable, the 1.4 mil aluminum sealing foil offers optimum sealing for all PCR plates. Using a medical-grade acrylic adhesive, our foil seals are easily pierced with single or multi-channel pipettors and robotic probes. These soft foil seals, resist rolling back when removing the backing paper and seal tightly to both PCR and Deep Well Blocks.

Ideally suited for PCR and Cold Storage down to -80 °C. Exceptional adhesive properties and foil material durability yield virtually no sample evaporation or drying.

Certified free of RNase, DNase, Pyrogen, and nucleic-acid contamination. 
 

Specifications 

Length133.35 mm
Length (w/ end tabs removed)120.65 mm
Width80.01 mm
Overall Thickness1.4 mil
Adhesive Thickness1.1 mil
MaterialAluminum
AdhesiveMedical Grade Acrylic
Max. Temperature120 °C
Min. Temperature-80 °C
Primary UsagesStorage or Sample Cover
Item#:
ASADHESEALFLALM14
Adhesive Sealing Film, Polyolefin, 2.8 mil
These optically clear polyester films are ideally suited for Real Time PCR (qPCR). They feature an inert, ultra-clear, and strong encapsulated silicone adhesive that provides extraordinary performance in real-time PCR applications.

Encapsulated silicone greatly reduces the risk of sample contamination due to exposure to adhesive. Once the film is pressed onto the plate, the raised portion of the well penetrates the encapsulation and a tight seal is formed on just that surface (not over the sample). This silicone seal adheres aggressively and diminishes the possibility of "Edge Effect".

The plasticized backing of this film is scored on both ends to allow for two handed (precise) placement on the plate. Both film and adhesive maintain incredible clarity and are the choice for highly demanding manual and automated processes.

Certified free of RNase, DNase, Pyrogen, and nucleic-acid contamination.
 

Specifications 

Length141.27 mm
Length (w/ end tabs removed)117.5 mm
Width77.8 mm
Overall Thickness2.8 mil
Adhesive Thickness2.0 mil
MaterialPolyester
AdhesiveEncapsulated Silicone
Max. Temperature120 °C
Min. Temperature-40 °C
Primary UsagesReal Time PCR (qPCR), PCR
Item#:
ASADHESIVEPOLFIN28

Please know that the manufacturer has suspended manufacturing this product indefinitely. 
We suggest purchasing PR1MA PCR Plastics
.
Contact your rep or email tech@midsci.com for more information.

Platemax CyclerSeal Sealing Film

  • Provides exceptional seal to safeguard samples during transport or storage
  • Eliminates well to well contamination and cross-over in PCR applications when used with Axygen's compression mat
  • Polypropylene film is wide temperature range compatible, -40° to 104°C
  • PCR-TS is designed for ELISA/EIA applications
  • PCR-TS-900 is twice as thick (as PCR-TS) and is suitable for water-bath and other difficult PCR applications
Item#:
ASPCRFILM5
  • Provides exceptional seal under the widest temperature conditions and reagents
  • Wide temperature range compatible, -80° to 104°C
  • Ideal for light sensitive samples and PCR or storage
  • Uniform adhesive provides optimum well sealing
  • PCR-AS-200 is pierceable
  • 100 films/pack
Item#:
ASPCRFILM4

LabNet LabValues Promotions 2024!

For a limited time enjoy discounted pricing on the AccuSeal Semi-Automated Plate Sealer (PS1000)
 

 See flyer for more details.

 

Promo is valid 07/1/24 – 12/31/24.

Not to be combined with any offers or discounts. No institutional pricing. All terms apply.   



AccuSeal Semi-Automated Plate Sealer

 

AccuSeal Semi Automated Plate Sealers from MIDSCI are engineered and constructed by Labnet International, Inc to maximize PCR, assay, and storage applications with a user-friendly panel and automated sealing options.


Great emphasis has been placed on incorporating a wide range of standard heights to deep well microplates with appropriate adaptors to efficiently fit the plates for consistent temperature regulation. The AccuSeal sealer is optimized for simple digital control and operation, user-friendly versatility and convenience as well as safety.
 

Controls and Operation:

  • Intuitive layout permits optimal sealing time, temperature and settings
  • Includes a "No Heat" setting for pressure sealing applications

Versatility and Convenience:

  • Adaptors specific for a PCR plate or an assay plate accommodate a variety of fits
  • Automatically adjusts heat for different height plates
  • Provides uniform pressure for a quality seal with a special non-stick coating to prevent messy cleanup.

 

Safety:

  • Motorized drawer features safety switches and prevents injury to the user.


Specifications
 
Dimensions6.75x12.75x14.25 inches
Weight24 Lbs
Sealing TemperatureOFF, 100 to 190 °C
Temperature Accuracy+/- 1.00 °C
Temperature Uniformity+/- 1.00 °C
Sealing Time0.5 to 10 sec
Compatible Plate MaterialsPP (Polypropylene)
PS (Polystyrene)
PE (Polyethylene)
Compatible Plate TypesStandard Assay Plates
Deep-well Storage Plates
PCR Plates: skirted, semi-skirted, non-skirted
Maximum Plate Height45mm
Compatible Sealing Film TypesFoil-polypropylene laminate
Clear polyester-polypropylene laminate
Clear polymer
Thin clear polymer
Foil-laminate
Foil

Adapters 
 
PS1000-PCRAccuSeal PCR plate adapter for sealing PCR and 384 well plates
PS1000-ADAPTAccuSeal Assay plate adapter for sealing assay plates

Sealing Film

PS1000-150AccuSeal Sealing Heat Sealing Film, Ultra Clear, Peelable, qPCR, 100 films/bx, 5 bx/cs
PS1000-200AccuSeal Sealing Heat Sealing Film for Low Temp, Peelable, PCR, 100 films/bx, 5 bx/cs
PS1000-300AccuSeal Sealing Heat Sealing Film for Storage, Piercable, Aluminum,100 films/bx, 5 bx/cs
PS1000-400AccuSeal Sealing Heat Sealing Film for Compound Storage, Peelable, 100 films/bx, 5 bx/cs
PS1000-GP300AccuSeal Sealing Heat Sealing Film w/ Paper Back, General, PCR, 100 films/bx, 10 bx/cs
PS1000-GP111AccuSeal Sealing Heat Sealing Film, Easy Pierce, 100 films/bx, 5 bx/cs

 

Item#:
ASPCRFILM8
|◀ 121 - 132 of 143 ▶|
View: