Home  >  PCR, Protein, RNA, DNA  >  PCR

PCR/qPCR

MIDSCI can supply almost every needed product for PCR/qPCR: tubes, plates, strips, caps, taq, Mastermixes, dNPTs, dye and probe for qPCR, sealing film and much more.  If you are looking for any of these things, we can match almost all needs to all cyclers.  If you don’t find it easily contact us at tech@midsci.com and we will find it for you. 

96 or 384 we have it.  Non-Skirted, semi-skirted or full skirted, we have it.  0.1, 0.2, or 0.5 mL we have it.  A1, A12, H12, A24, P24 cuts, we have them.  Sybr© Green or probe alternative, we have it.  

Pro Tip: Colored plastics do not have any impact on DNA amplification.  But when setting up qPCR it is often recommended to use white plastics.  This will limit or prevent fluorescence refraction.  Light refraction can minimize sensitivity and consistency. 

Pro Tip 2: If you are seeing inconsistencies in PCR/qPCR try PR1MA Pipette Tips.  This will help optimize and reduce variance in the reactions.  Simple test, see the residual liquid left in tips?  This means some of the taq, dNTPs, sample, etc is left in the tip.  PR1MA tips help reduce that significantly and improve your consistency. 

Pro Tip 3: Seeing evaporation in the outer wells of a PCR/qPCR plate?  Sometimes it’s the plate, sometimes it the seal, and sometimes it’s the cycler.  Call us we have solutions.

|◀ ◀ 265 - 276 of 300 ▶ ▶|
View:
302nm, UV/White, 20x20cm,

New electronic ballast and cutting-edge construction offers:

  • Increased ultraviolet output and intensity
  • No light flicker
  • Wider intensity range with variable selection (select models)
  • Fast lamp start up
  • Universal power supply
  • Reduced electrical consumption
  • Longer tube life
  • Lighter weight
  • Improved gel visualization and gel documentation
  • 2 year warranty

Models available include:

  • 365nm longwave UV and white light
  • 302nm midrange UV and white light or
  • Combination 2UV 365nm longwave, 302nm midrange and white light
  • Easily switch among the light sources with the rocker switch on the front of the unit
  • Each UV and white light surface area measures 20 x 20cm
  • Hinged, clear UV blocking cover, included with each transilluminator, is height adjustable for access to the filter surface
  • All transilluminators carry a two-year warranty

Specifications

Light Source:
365nm or 302nm UV White Light
Watts: 8 watts
Dimensions:

 13.25D x 19.13W x 5H in. (279 x 356 x 143mm)
Height includes UV blocking cover

Note about UV: UVP refers to its midrange UV products as 302nm. Other manufacturers may say 300nm, 310nm or 312nm. The spectral output of these units is the same as UVP's 302nm.
Part Numbers
110 - 115V 230V Model Intensity Style Wavelength Filter Size
95-0415-01 95-0415-02 TLW-20 Single 365nm/White 20x20cm
two sides
95-0415-04 95-0415-05 TMW-20 Single 302nm/White 20x20cm
two sides
95-0418-01 95-0418-02 LMW-20 Single 365/302nm/White 20x20cm
two sides
Replacement Tubes
Replacement Tube 34-0056-01 8 watt, White
Replacement Tube 34-0006-01 8 watt, 365nm
Replacement Tube 34-0042-01 8 watt, 302nm
Item#:
95-0415-04
Your Price:
3043.10
Each
Transilluminator, 470nm,

UltraBright LED Transilluminator

  • Safer to use that standard UV transillumiators
    • NO UV hazard to skin and eyes.
    • NO DNA damage inherent to UV - No worries when cutting out bands for elution.
  • Easy for use and gel cutting
    • NO need to wear amber glasses.
  • Adjustable intensity: from 100% down to 50%.
  • The THINNEST blue LED illuminator in the world.
    • Strong blue LED for excitation.
    • Uniform: <5% coefficient of variance (CV) across the full filter area.
    • Compact and Light: 30 mm in height
  • Wide applications other than DNA/RNA gel visualization, such as fluorescent proteins.
    • Sensitive for a wide range of fluorphores: DNA SafeStain, GelGreen, GelRed, EthBr, SYBR® Safe, SYBR Gold, SYBR Green I® & II, SYPRO® Rudy, SYPRO® Orange, Coomassie Fluor Orange stains, and Lumitein Protein Gel Stain.

The UltraBright LED Transilluminator is ultra-bright and provides safer blue LEDs and easy gel cutting amber filter. Higher sensitivity leads to compatibility with most stains. Full size viewing surface is 160mm x 200 mm.

Item#:
LB-16
Your Price:
1639.00
Each

Accuris MyVolt™ Mini Power Supply

  • Compact and simple
  • Choose constant 100 V or 200 V output
  • Two pairs of output terminals

 

The Accuris MyVolt Mini is a compact electrophoresis power supply ideal for basic, constant voltage applications. Users can select constant 100 V or 200 V output, and the current can reach a maximum of 200 mA.

 

Two sets of output jacks are available to connect up to 2 gel rigs and these small power supplies can securely be stacked for use with additional gel rigs.


Specifications

Output Voltage100V/200V constant
Current OutputMax. 200mA
Max Wattage40W
Output Terminals2 pairs
Weight0.9 lbs / 0.4 kg
Dimensions6.25 x 4.5 x 2.3 in.
16 x 11.5 x 5.7 cm
Electrical100 - 240V, 50-60Hz

 


Item#:
ASPS2100

Wide Format Gel System 23.5 cm x 14 cm


 Horizontal Wide Format Gel System for 23.5cm x 14cm gels. Includes UVT gel tray four comb slots and end gates & (4) 50 Tooth combs, 1.5 mm thickness.
System Description

A high-capacity system in a mini-gel size, the Galileo 2314 unit enables rapid separation of large numbers of samples.

The 2314 wide format system accomodates up to 200 samples per run, for quick separation and high thru-put. Because of the wide format of the Galileo 2314 unit, the 23cm wide by 14cm long tray is non-gasketed. Gel casting can be accomplished by taping, or we recommend the G-80-WADJ-CST multi-casting unit for even quicker and more convenient gel casting. The gel tray is UV transmissible, includes an imprinted fluorescent ruler, and has 4 comb slots. Choose from a wide variety of comb options, all with micro-titer spacing for easy loading with multi-channel pipets.
System Features

The Galileo 2314 complete system includes these features:

  •     Heavy duty lower buffer chamber
  •     Interlock safety lid with attached leads
  •     Non-gasketed 23cm wide x 14cm long UV-transparent gel tray with built-in fluorescent ruler and 4 comb slots.
  •     Four 1.5mm x 50 tooth combs
  •     Opaque well visualization plate.
Item#:
ASWIDEFORGELSY23
Transilluminator, 20x20cm,

MAIN FEATURES


  • DigiCam color camera with 16 megapixel resolution

  • Lightweight, compact hood provides a compact darkroom environment, hood now includes a new UV blocking viewer window
  • Benchtop UV Transilluminator delivers back-lit UV; select from several benchtop models
  • Color printer generates instant 4" x 6" low cost, laboratory quality color prints
  • Ethidium bromide filter for fluorescent stained gels
  • Combination lock secures the camera to the darkroom

Illuminate

Illuminate stained gels with the UV fluorescence of the compact UV transilluminator. The Ethidium Bromide emission filter, positioned inside the hood, is easily interchangeable for other filter types.

Capture and View

Capture brilliant color images with the high resolution, megapixel digital color camera. View images through the viewer window.

Save and Print

Save images to the memory card (4GM minimum) or instantly print images on the laboratory quality photo printer included with the system. The camera can be connected to a PC with a USB cable(not included) for transferring images.

Select from several Benchtop UV transilluminators:

  • M-20V: 302nm UV, 20x20cm filter

  • LM-20, 302/365nm UV, 20x20cm filter

  • M-26V, 302nm UV, 21x26cm filter

  • LM-26, 302/365nm UV, 21x26cm filter

Item#:
97-0274-04
Your Price:
5651.67
Each

Minigel System 9cm x 11cm & (1) 10 and (1) 14 tooth comb


Horizontal gel electrophoresis minigel system for 9cm x 11cm minigels. Includes gasketed UVT gel tray with fluorescent ruler, and (1) 10 and (1) 14 tooth comb, 1.5 mm thickness. Comb substitutions are available. Four year manufacturer warranty.

System description

The standard 0911 mini gel system includes a RapiCast™ gasketed gel tray for convenient gel casting right in the buffer chamber.

System features

The 0911 complete system includes these features:

  •     Heavy duty lower buffer chamber
  •     Interlock safety lid with attached leads
  •     Gasketed (cast in place) 9cm wide x 11cm long UV-transparent gel tray with built-in fluorescent ruler and 2 comb slots.
  •     One 1.5mm x 10 tooth comb
  •     One 1.5mm x 14 tooth comb
Item#:
ASMINGEL9AND11S

Double sided non- cooled vertical system, 10cm x 10cm


 Reflection double sided water cooled vertical system, 10cm x 10cm with or without casting base, two pack each of plain and notched glass, one acrylic blocker plate, (2) 10-well 0.8mm thickness combs, (4) 0.8 mm spacers. Four year warranty.
System Description

Run either one or two gels simultaneously on these versatile separation systems. The 10x10cm size of the system also accomodates most pre-cast gels.

Complete double sided vertical system for running one or two gels, in a 10 x 10 cm format. Unique casting bases allows both casting and running of gels without unclamping from the upper buffer chamber, providing for safer and more convenient gel handling. In addition the 1010 device will accommodate most precast gel cassettes on the market.

Water cooling feature is included for protocols that require it. Connections are easily made by attaching standard tubing over the 3/8" barbed in/out ports provided on the device. Water may be provided by tap or other temperature controlled water source. Optional alumina backer plates may be used to facilitate cooling efficiency and uniformity, and are available in the accessories list below.
System Features

The Galileo Reflection™ 85-1010 complete system includes these features:

  •     Heavy duty upper buffer chamber with cooling port connections.
  •     Lower buffer chamber.
  •     Interlock safety lid with attached leads.
  •     Casting base.
  •     Two-pack each of plain & notched glass plates.
  •     One acrylic blocker plate (used when running only one gel).
  •     Ttwo 10-well, 0.8mm thick combs
  •     Four 0.8mm thick side spacers.

System Accessories

Choose amoung these accessories to customize each system for your specific needs.

  •     Alumina cooling plate. For use with cooling systems. This plate can be sandwiched between the gel and the inner buffer chamber to improve overall temperature uniformity.
  •     Casting base. For quick, efficient and leak-proof casting.
  •     Multiple gradient caster.
Item#:
ASDOUBSIDNCVER10

ENDURO Modular Vertical Gel System


A modular system allowing PAGE, electroblotting and 2D gel electrophoresis to be carried out in the same tank, simply by changing the inserts. Users can purchase only the parts they need, or a complete combined system for a cost savings over buying all three systems separately.

  • Modular Design
  • PAGE, Electroblotting and 2D Electrophoresis
  • Quick and easy set up
  • Wide range of accessories
 
MODULAR SYSTEM 
 
The modularity of the ENDURO™ System is based on three operational inserts and a common buffer tank. All three inserts, PAGE, electroblotting and 2D electrophoresis, have their own electrode assembly that connects into the lid of the buffer tank. PAGE INSERT Set up of gels is quick and easy with the PAGE insert. A set of plates are placed on either side of the insert and held into place by the pressure bar. An additional gel may be run on each side by stacking the plates. The assembly is then placed into the casting stand for pouring the gel. After the gel is polymerized, the insert is removed from the casting stand and placed in the buffer tank.
 

ELECTROBLOTTING INSERT
 
The electroblotting insert has a capacity for 3 gels. Setting up blots is easy - gels are sandwiched in the blotting cassettes with the transfer membranes. The cassettes are then placed in the insert, which is in turn placed in the buffer tank. Coiled electrodes in the insert generate a high intensity current, allowing transfer to take place in about an hour.
 

2D ELECTROPHORESIS INSERT
 
This insert is used for running the first dimension of IEF gels. Up to ten 8 cm gels are poured in disposable capillary tubes and placed in this insert. Gasketed ports allow for easy insertion and removal of tubes. Blocking plugs are included for closing off ports that are not in use.
 

BUILT FOR SAFETY AND ENDURANCE
 
For leak-proof performance and a long service life, the buffer tank is molded from high quality acrylic. Pins on the top of the inserts ensure that the lid is placed onto the insert in the proper orientation. These pins also aid in removal of the lid. Removing the lid disconnects power to the electrodes.

 
ACCEPTS MOST PRE-CAST GELS
 
Most precast gels, including NuSep™, Bio-Rad™, Invitrogen™, and Cambrex™, can be used with the ENDURO™ PAGE System. The use of precast gels saves time by eliminating the need to pour gels and wait while they polymerize.

 
WIDE RANGE OF ACCESSORIES
 
A variety of combs and spacers of varying widths are available to customize your ENDURO™ system. All are color coded and clearly marked for easy identification. Both notched and plain plates can be purchased with spacers permanently bound for easy set up. Additional fiber pads and replacement cassettes are also available as well as capillary tubes, blanking ports and tube supports. Cooling packs are also available to help reduce buffer temperature during higher voltage or longer runs.
Item#:
ASEDIROMOVERGES

Minigel System w/ 4 comb slots, 12 cm x 14 cm

Horizontal gel electrophoresis system for 12cm x 14cm minigels. Includes gasketed UVT gel tray with fluorescent ruler, and (1) 12 and (1) 20 tooth comb, 1.5 mm thickness. Comb substitutions are available. Four year manufacturer warranty.
 
System Description

This flexible system from Galileo is the perfect personal unit for a wide range of separation needs, and our most popular model.

Unit features RapidCast trays for quick in-unit gel casting of 12cm wide by 14cm long gels.

Choose a complete system or build your own custom unit from the many system components we offer.  The NEBT-80-1214 gel system is supplied with a RapidCast™ gasketed gel tray for convenient gel casting directly in the buffer chamber.  Choose from a wide variety of comb options.  All are compatible with Owl Separation Systems B2A or similar devices.  The teeth on combs marked as "microtiter" are uniformly spaced for easy loading with multichannel pipettors.System features

System Features

The Galileo 1214 complete system includes these features:

  •     Heavy duty lower buffer chamber
  •     Interlock safety lid with attached leads
  •     Gasketed (cast in place) 12cm wide x 14cm long UV-transparent gel tray with
  •     built-in fluorescent ruler and 2 comb slots.
  •     One 1.5mm x 12 tooth comb
  •     One 1.5mm x 20 tooth comb

System Options
 
The Galileo 1214 unit can be also be ordered with our new automatic buffer recirculation system (80-1214-R) or with installed buffer ports for connection to an external buffer recirculation system (80-1214-BEP)
Item#:
ASMINGEL412AND14

Electrophoresis System Bundle


Package Includes:

  • Complete PR1MA™ myGel™ Mini system (E1101; includes gel box, power supply, and casting sets)
  • SmartDoc™ 2.0 Gel Viewing and Smart Phone Imaging System (E5001-SDB)
  • SmartGlow DNA Stain, 1.0 mL (BE4500-PS or BE4500-LD)
  • Agarose LE, 100 grams
Item#:
ASESYSBUNDLE

Horizontal Gel System, 15cmW x 25cmL


Galileo large gel systems are designed for high resolution of complex analytes. All units feature long run lengths, with medium to high capacity units available. High quality 9mm thick rugged acrylic construction, resists cracking and warping.
 
Your safety ensured with interlocking lid, protected sockets and permanently attached power cords. Epoxy sealed electrode connections, resist corrosion and leaks. Gold plated banana plugs.
Meets or exceeds IEC1010-1 standards. Safe & Reliable UV transmissible gel trays with built-in fluorescent rulers.

Large units feature trays with multiple comb slots for veratility. Machined finger grooves on the tray sides for easy and sure handling. Wide range of comb configurations, including multi-channel capability. Selected units available with buffer recirculation capabilities. Combs specifications clearly marked on each comb. Optional casting methods for flexibility, convenience and speed.

Convenient & Versatile
 
  • Exceptional resolution.
  • Platinum electrodes configured to provide uniform field for straight runs.
  • Multiple comb slot options for a wide range of sample and run-length configurations.
Item#:
ASHORIZGELSY15
  • This unique, new design for the Life Science Laboratory allows crosslinking 
    and hybridization at one location
  • Hybridizer and Crosslinker portions of the HL-2000 operate independently of each other
  • The Crosslinker is also available as a stand-alone unit
  • Temperature control (ambient to 99.9°C)
  • Variable speed control (10 to 18 RPM) enabling consistent saturation of samples, whether it be for washing or hybridizing
  • Large LED display
  • Stainless steel internal construction
  • Multiple bottle sizes, arrangements and off-set bottle positions (three bottle sizes available)
  • Optional rocker plate
    In addition to the hybridization oven features mentioned above, the Crosslinker features:
  • Preset and manual controls for ultraviolet or time exposures
  • Preset exposure delivers 120,000 microjoules or five minutes of exposure
  • Shortwave 254nm, 8 watt, ultraviolet tubes
  • Microprocessor measures and controls UV output, ensuring maximum energy efficiency
  • Large LED display continuously displays time or energy settings
  • Tactile membrane switch keypad
  • Window on the door allows viewing of the process yet blocks out the UV radiation
  • Dimensions: 17.5W x 24H x 15D in. (445 x 610 x 381 mm)
  • 1 year warranty

Specification

Variable Speed

10 to 18 RPM

Heating Element

1200 Watts

Operation Range

Ambient to 99.9oC

Temperature Controller Accuracy

+0.1OC

Temperature Display

LED

Temperature Stability

Inside Oven: +0.3oC to 68oC
Inside Bottles: +0.1oC to 68oC

Temperature Uniformity

Inside Oven: +0.1oC to 68oC
Inside Bottles: +0.1oC to 68oC

Interior Dimensions

14"W x 10.75"H x 10.75:D 
(356 x 273 x 273mm)

Bottle Capacity

Twenty (20) 35 x 150 mm
Ten (10) 35 x 300 mm
Four (4) 70 x 300 mm 
(with separate Carousel Kit)

Power

12V AC/DC from 115V/60Hz or 230V/50Hz

Crosslinker Specifications (HL-2000 HybriLinker only)

Pre-set or user-selected UV energy or UV time exposure settings

Maximum UV energy setting of 999,900 microjoules per cm2

LED displays time or energy

Internal interlocking safety system

Tactile membrane switch keypad

Five 8-watt, 254nm shortwave dual bipin discharge type tubes

Interior Dimensions: 11"W x 3.7"H x 11.5" D (280 x 95 x 292mm)
Item#:
95-0031-01
Your Price:
7325.45
Each
|◀ ◀ 265 - 276 of 300 ▶ ▶|
View: