S2K Commerce - Products Dropdown
S2K Commerce - Shopping Cart
S2K Commerce - Order Entry
PCR/qPCR
MIDSCI can supply almost every needed product for PCR/qPCR: tubes, plates, strips, caps, taq, Mastermixes, dNPTs, dye and probe for qPCR, sealing film and much more. If you are looking for any of these things, we can match almost all needs to all cyclers. If you donāt find it easily contact us at tech@midsci.com and we will find it for you.
96 or 384 we have it. Non-Skirted, semi-skirted or full skirted, we have it. 0.1, 0.2, or 0.5 mL we have it. A1, A12, H12, A24, P24 cuts, we have them. SybrĀ© Green or probe alternative, we have it.
Pro Tip: Colored plastics do not have any impact on DNA amplification. But when setting up qPCR it is often recommended to use white plastics. This will limit or prevent fluorescence refraction. Light refraction can minimize sensitivity and consistency.
Pro Tip 2: If you are seeing inconsistencies in PCR/qPCR try PR1MA Pipette Tips. This will help optimize and reduce variance in the reactions. Simple test, see the residual liquid left in tips? This means some of the taq, dNTPs, sample, etc is left in the tip. PR1MA tips help reduce that significantly and improve your consistency.
Pro Tip 3: Seeing evaporation in the outer wells of a PCR/qPCR plate? Sometimes itās the plate, sometimes it the seal, and sometimes itās the cycler. Call us we have solutions.
AeraSeal™Ā features a hydrophobic, gas permeable membrane with a medical grade, non-cytotoxic adhesive. The porous membrane consists of layers of heat welded rayon fibers.
- Pore size from 10 µm to 50 µm
- Moisture vapor transmission rate = 4,200 g/m²/24 hr
- Easy-to-pierce with serological pipets and pipet tips for direct sample recovery
- Available in roll format for automation: AeraSeal™Ā Roll-Seal
- Cell culture
- Tissue culture
- Bacterial cultures
- -20°C to +80°C
SealPlate® SealMate™ RollsĀ for Fast and Efficient Microplate Sealing
The SealMate SealPlate Starter Kit features a re-usable dispenser and two rolls of perforated film.
Ā
The dispenser facilitates the quick and easy dispensing of film from a roll allowing microplates to be sealed three times faster than using sheeted films. Cost-effective replacement rolls are sold separately. Ideal for use under the hood; the SealMate dispenser minimizes film contamination.
- Environmentally friendly; no paper liner to remove and discard; utilizes approximately 72% less material than SealPlate sheeted film
- Each sheet is separated by an adhesive-free, perforated, color-coded green band
- The smooth lower surface of the dispenser can be used to seal the film to the plate
- Dispenser protects unused seals from contamination
- Lower support prop prevents dispensing bill from contacting surfaces to prevent contamination
- Replacement rolls can be easily installed by releasing the locking clasps on the dispenser
- General laboratory use
- Short-term storage
- Incubation
- ELISA
- -40°C to +120°C
Eye and face protection are essential for anyone working with ultraviolet light sources. UV radiation can cause delayed reactions of sunburn to unprotected eyes and skin. Choose from three styles of comfortable eye/face protection: spectacles, goggles, or faceshield. Spectacles are made of impact resistant polycarbonate. The top and side shield design provide full UV protection for the eyes. Goggles are constructed of specially-formulated plastic giving optimum viewing contrast and lessened eye fatigue. The lightweight design and flexible rubber trim of the goggles fit comfortably on the face, even over prescription glasses. Air vents are located on each side of the goggles to allow air flow while blocking UV. The faceshield covers the face and neck area.Ā
Eyewear complies with ANSI-Z87.1 specifications for safety eyewear and NIOSH Document HSM-83-1109. Criteria for a Recommended Standard - Occupational Exposure to Ultraviolet Radiation.
Eye and face protection are essential for anyone working with ultraviolet light sources. UV radiation can cause delayed reactions of sunburn to unprotected eyes and skin. Choose from three styles of comfortable eye/face protection: spectacles, goggles, or faceshield. Spectacles are made of impact resistant polycarbonate. The top and side shield design provide full UV protection for the eyes. Goggles are constructed of specially-formulated plastic giving optimum viewing contrast and lessened eye fatigue. The lightweight design and flexible rubber trim of the goggles fit comfortably on the face, even over prescription glasses. Air vents are located on each side of the goggles to allow air flow while blocking UV. The faceshield covers the face and neck area.Ā
Eyewear complies with ANSI-Z87.1 specifications for safety eyewear and NIOSH Document HSM-83-1109. Criteria for a Recommended Standard - Occupational Exposure to Ultraviolet Radiation.
Eye and face protection are essential for anyone working with ultraviolet light sources. UV radiation can cause delayed reactions of sunburn to unprotected eyes and skin. Choose from three styles of comfortable eye/face protection: spectacles, goggles, or faceshield. Spectacles are made of impact resistant polycarbonate. The top and side shield design provide full UV protection for the eyes. Goggles are constructed of specially-formulated plastic giving optimum viewing contrast and lessened eye fatigue. The lightweight design and flexible rubber trim of the goggles fit comfortably on the face, even over prescription glasses. Air vents are located on each side of the goggles to allow air flow while blocking UV. The faceshield covers the face and neck area.Ā
Eyewear complies with ANSI-Z87.1 specifications for safety eyewear and NIOSH Document HSM-83-1109. Criteria for a Recommended Standard - Occupational Exposure to Ultraviolet Radiation.
IBI DEPC-Treated, Nuclease-Free Water is ideally suited for all applications in molecular biology lab including PCR, RT-PCR, restriction enzyme
assays, modifying enzyme assays, transfection, cloning, transformation, and specifically for all RNA assays.
IBI DEPC-Treated Water is manufactured under stringent conditions. The purification process for this product includes continuous
deionization, reverse osmosis, UV-treatment, 0.1Āµm filtration, followed by steam sterilization in an autoclave. The product is re-autoclaved
to ensure the breakdown of DEPC and release of carbon dioxide that may cause the pH to shift.
IB42200 |
DEPC Treated Water, nuclease free, 125mL |
IB42201 |
DEPC Treated Water, nuclease free, 24 x 125mL |
IB42202 |
DEPC Treated Water, nuclease free, 48 x 125 mL |
IB42210 |
DEPC Treated Water, nuclease free, 500 mL |
IB42211 |
DEPC Treated Water, nuclease free, 10 x 500 mL |
IB42212 |
DEPC Treated Water, nuclease free, 20 x 500 mL |
IB42220 |
DEPC Treated Water, nuclease free, 1L |
IB42221 |
DEPC Treated Water, nuclease free, 6 x 1L |
IB42222 |
DEPC Treated Water, nuclease free, 12 x 1L |
IB42230 |
DEPC Treated Water, nuclease free, 2L |
IB42231 |
DEPC Treated Water, nuclease free, 6 x 2L |
IB42240 |
DEPC Treated Water, nuclease free, 10L |
Adhesive Sealing Film, Polyester, 3.1 mil
Specifications
Length | 146.05 mm |
Length (w/ end tabs removed) | 119.05 mm |
Width | 79.38 mm |
Overall Thickness | 3.1 mil |
Adhesive Thickness | 1.1 mil |
Material | Polyester |
Adhesive | Medical Grade Acrylic |
Max. Temperature | 120 °C |
Min. Temperature | -40 °C |
Primary Usages | Elisa, Storage or Sample Cover |
- Tracks the migration progression of your sample during polyacrylamide electrophoresis
- Loading dye migrates independently of the samples, making it easier to estimate the migration of proteins
- DNase/RNase/Protease free
General Purpose Sealing FilmĀ For a More Secure Seal to Minimize Evaporation
General Purpose polypropylene films offer superior barrier properties to minimize evaporation and prevent well-to-well contamination. Ideal for use with polypropylene plates.- Certified DNase- & RNase- free
- Features good chemical resistance
- Provides a very secure seal to minimize evaporation, but is slightly harder to remove than SealPlate films
- Less rigid polypropylene film reduces aerosols upon removal
- Specially formulated adhesive minimizes plate residue
- Can be used as a temporary seal while awaiting further processing
- General laboratory use
- Short-term storage
- Incubation
- ELISA
- -40°C to +120°C
- Safely excise bands from gels
- Avoid cross contamination
- One-handed operation for quick and accurate gel cutting
- Safer than using razor blades and won't scratch transilluminators
Cut gel with pipet tip on the end of a standard 1000µl pipettor. Gel piece is suspended in tip when pipettor is lifted from the gel. Expel the gel piece by pushing the pushbutton on the pipettor. Tip is ejected in normally using the ejector button.