Hoefer® Combs for SUB25 Submarine Gel Electrophoresis Systems

Available in multiple tooth configurations and thicknesses to suit various sample volumes and well sizes. Hoefer® combs ensure sharp, consistent, well formation for accurate, reproducible results.

• MC = Microtiter spacing for use with a multichannel pipette
• Sample volume listed is for a 5 mm deep well
• For use with SUB25 Submarine Gel Electrophoresis Systems

Specifications

Item #	Description	Wells	Teeth	Thickness	Width	Sample Vol.
SUB25-C1-26MC	SUB25 Comb	26 Wells	26 Teeth	1 mm	7 mm	30 uL
SUB25-C15-26MC	SUB25 Comb	26 Wells	26 Teeth	1.5 mm	7 mm	45 uL
SUB25-C2-26MC	SUB25 Comb	26 Wells	26 Teeth	2 mm	7 mm	60 uL
SUB25-C1-52MC	SUB25 Comb	52 Wells	52 Teeth	1 mm	3 mm	13 uL
SUB25-C15-52MC	SUB25 Comb	52 Wells	52 Teeth	1.5 mm	3 mm	20 uL
SUB25-C2-52MC	SUB25 Comb	52 Wells	52 Teeth	2 mm	3 mm	25 uL

 

Proudly made in the USA! Click here for more made in America products!
 

Hoefer® Standard Format Glass Plates for Vertical Systems

Standard format glass plates are for SE660, SE600X Chroma, SE600, SE640, SE410, and SE400 Vertical Gel Electrophoresis Units.

Run as many as four 0.75, 1.0, or 1.5 mm thick gels on SE600 Series units and two gels on the SE400 Series at one time under identical conditions using the double gel capacity Divider Plates. Insert a divider plate between the glass plates that make up a single gel sandwich. Place spacers on each side of the divider plate to form two gel cavities for pouring gels. This two gel “club sandwich” fits into the same casting stand and seals perfectly.

Specifications
 

Item #	Description	Plate Size	Qty
SE6402	Regular Glass Plates	7.09 x 3.15 In. | 18 x 8 cm	2/pk
SE6402LF	Low Fluorescence Glass Plates	7.09 x 3.15 In. | 18 x 8 cm	2/pk
SE6402D	Notched Glass Divider Plate	7.09 x 3.15 In. | 18 x 8 cm	1/ea
SE6102	Regular Glass Plates	7.09 x 6.30 In. | 18 x 16 cm	2/pk
SE6102LF	Low Fluorescence Glass Plates	7.09 x 6.30 In. | 18 x 16 cm	2/pk
SE6102D	Notched Glass Divider Plate	7.09 x 6.30 In. | 18 x 16 cm	1/ea
SE6602	Regular Glass Plates	7.09 x 9.45 In. | 18 x 24 cm	2/pk
SE6602LF	Low Fluorescence Glass Plates	7.09 x 9.45 In. | 18 x 24 cm	2/pk
SE6602D	Notched Glass Divider Plate	7.09 x 9.45 In. | 18 x 24 cm	1/ea

Hoefer® Glass and Alumina Plates for Mini Vertical Systems

Small Glass and Alumina Plates for Mini Vertical Units.

Compatible with SE300 MiniVE, SE260, and the SE250 Series Vertical Electrophoresis Systems. (see notes below). 

This set includes precision-crafted glass and alumina plates for electrophoresis applications. Includes a variety of notched and rectangular plates in 10 x 8 cm and 10 x 10.5 cm sizes, ideal for customizing your vertical gel setup.

*Alumina plates are not recommended for use with the Hoefer® miniVE™ Vertical Protein Electrophoresis and Blotting System. 
 

Specifications
 

Item#	Description	Plate Size	Weight	Qty
SE202P-10	Rectangular Glass Plates	3.94 x 3.15 In. | 10 x 8 cm	0.66 lb | 0.3 kg	10/pk
SE202GN-5	Notched Glass Plates	3.94 x 3.15 In. | 10 x 8 cm	0.44 lb | 0.2 kg	5/pk
SE262P-5	Rectangular Glass Plates	3.94 x 4.13 In. | 10 x 10.5 cm	0.66 lb | 0.3 kg	5/pk
SE262GN-5	Notched Glass Plates	3.94 x 4.13 In. | 10 x 10.5 cm	0.66 lb | 0.3 kg	5/pk
SE202N	Notched Alumina Plate	3.94 x 3.15 In. | 10 x 8 cm	0.22 lb | 0.1 kg	1/ea
SE202N-10	Notched Alumina Plates	3.94 x 3.15 In. | 10 x 8 cm	0.44 lb | 0.2 kg	10/pk
SE262N-5	Notched Alumina Plates	3.94 x 4.13 In. | 10 x 10.5 cm	0.44 lb | 0.2 kg	5/pk

Proudly made in the USA! Click here for more made in America products!
  

Hoefer® Spacers for Dual and Air Cooled Vertical Systems

Gel Spacers for SE400 and SE600 Series Vertical Electrophoresis Systems.

Engineered for consistent gel casting, these precision-machined spacers are made from high-strength, chemically resistant plastics. Available in three lengths (8, 16, and 24 cm) and multiple thicknesses (0.75 mm, 1.0 mm, 1.5 mm) to accommodate various gel formats.

All 1.0 mm spacers are white for quick identification during setup.

Specifications
 

Item #	Thickness	Length	Width
SE6419-2-75	0.030 In. | 0.75 mm	3.15 In. | 8 cm	0.79 In. | 2 cm
SE6419-2-10	0.039 In. | 1 mm	3.15 In. | 8 cm	0.79 In. | 2 cm
SE6419-2-15	0.059 In. | 1.5 mm	3.15 In. | 8 cm	0.79 In. | 2 cm
SE6119-2-75	0.030 In. | 0.75 mm	6.30 In. | 16 cm	0.79 In. | 2 cm
SE6119-2-10	0.039 In. | 1 mm	6.30 In. | 16 cm	0.79 In. | 2 cm
SE6119-2-15	0.059 In. | 1.5 mm	6.30 In. | 16 cm	0.79 In. | 2 cm
SE6619-2-75	0.030 In. | 0.75 mm	9.45 In. | 24 cm	0.79 In. | 2 cm
SE6619-2-10	0.039 In. | 1 mm	9.45 In. | 24 cm	0.79 In. | 2 cm
SE6619-2-15	0.059 In. | 1.5 mm	9.45 In. | 24 cm	0.79 In. | 2 cm
SE6118-2-10	0.039 In. | 1 mm	6.30 In. | 16 cm	0.39 In. | 1 cm
SE6118-2-15	0.059 In. | 1.5 mm	6.30 In. | 16 cm	0.39 In. | 1 cm

Hoefer® T-Spacers for Mini Vertical Systems

Compatible with SE300 MiniVE, SE260, and the SE250 Series Vertical Electrophoresis Systems.

Ensure accurate gel thickness and leak-free casting with precision-milled T-spacers. All spacers are precision-machined from durable plastics for high chemical resistance and optimum tensile strength. These spacers provide consistent alignment and long-term durability for mini vertical systems.

Available in multiple lengths (8 cm and 10.5 cm) and thicknesses (0.75 mm, 1.0 mm, and 1.5 mm) to suit your specific gel requirements.

Specifications
 

Item #	Thickness	Length	Width
SE2119T-2-75	0.030 In. | 0.75 mm	3.15 In. | 8 cm	0.39 In. | 1 cm
SE2119T-2-10	0.039 In. | 1 mm	3.15 In. | 8 cm	0.39 In. | 1 cm
SE2119T-2-15	0.059 In. | 1.5 mm	3.15 In. | 8 cm	0.39 In. | 1 cm
SE2619T-2-75	0.03 In. | 0.75 mm	4.13 In. | 10.5 cm	0.39 In. | 1 cm
SE2619T-2-10	0.039 In. | 1 mm	4.13 In. | 10.5 cm	0.39 In. | 1 cm
SE2619T-2-15	0.059 In. | 1.5 mm	4.13 In. | 10.5 cm	0.39 In. | 1 cm

Glow-Writer Pen

Fine-Point Phosphorescent Marking Pen for Laboratory Autography

• Fine Point Nib- Provides fine writing and greater information density
• Specially Designed- Ideal glow intensity and afterglow duration helps prevent over-andunder exposure
• No Ink Clogs- Low ink viscosity and porous nib prevents ink from clogging

Aluminum Autoradiography Cassette 5 x 7

Classic Push-Button Cassettes

• Constructed From Lightweight Aluminum & Nylon
• Special Curved Door Gives Exceptional Screen-Film Contact

RunBlue gels are more rigid and up to 10 times stronger than conventional precast gels resulting in more robust gels that can be handled with confidence. No tearing - an 8% gel can be thrown into the air and caught without breaking!

• RunBlue gels are manufactured using a unique method of polymerisation that results in more uniform and more complete polymerisation of the Acrylamide when compared to conventional, chemical based methods. This results in gels that have superior batch to batch reproducibility and practically eliminates exposure to un-polymerised Acrylamide.
• RunBlue gels incorporate a stacking gel that has been dyed (red for SDS) for the simplest ever sample loading. In addition, there is no comb to remove as the top of the teeth are fixed in place. This not only prevents the teeth from being accidentally torn off during comb removal but that all of the wells are uniform, with the teeth remaining vertical. This prevents sample cross contamination / inability to load desired Vol. The teeth also protrude above the lower front plate of the gel cassette preventing sample flow over into adjacent wells.
• Runblue gels are available in two different cassette sizes providing compatibility with the most common gel tanks and apparatus.  10x10 cm cassettes are compatible with Invitrogen/Life Technologies equipment and any other equipment designed for this format, such as the Hoeffer and Owl tanks. Our 8x10 cm cassette is designed to fit the Biorad equipment (Mini Protean I, II and II, Tetra etc).
• The resolving gel on RunBlue gels extends to the very bottom of the cassette which not only provides improved resolution but also there is no protruding gel that requires trimming prior to blotting. There is also no additional tape / covers to remove - simply take the gel from the pack and use.
• RunBlue gels are supplied in boxes of 10 gels. They are available in a 12 well format, covering a range of concentrations and gradients.

Benefits of RunBlue Precast Gels

• 2 year shelf life - never throw away another gel
• Up to 10x stronger - no more torn, ruined gels
• Load up to 20µl - see everything in your sample
• Dyed stacking gel - makes gel loading child's play (SDS = Red)
• No comb to remove - no more broken or bent teeth
• Full length resolving gel - improved resolution and better blotting
• 10x10 cm and 8x10 cm cassette - total compatibility with most popular tanks including Invitrogen and Biorad equipment
• Fast delivery with immediate and expert technical support for total peace of mind
• Best value gels available - save money!

 
Western Blot Boxes

• The perfect box for every blot
• Reduce antibody usage
• The hinged Lid minimizes evaporation
• For halves, wholes, strips, or minis

No matter what size your Western blot is, there's a box that fits it perfectly. With boxes that are correctly matched to common blot sizes, you can fit more blots on shakers/rockers while keeping reagent and antibody usage to an absolute minimum. Additionally, all corners are formed at 90° angles and the bottom surface is uniformly flat, further reducing consumption of costly reagents and antibodies (for example, popular mini gels require only about 4 mL).

At a price that makes them truly disposable, all sizes are engineered from crystal clear polystyrene. The exception is our opaque black boxes (except WBB7BK and WBB15BK), which protect light-sensitive samples. All sizes are also equipped with an easy-to-open hinged lid that reduces evaporation.

Specifications
 

This brand is being discontinued and will only be available while supplies last.

Need a great DNA Ladders at a great price?

Try our PR1MA™ SmartCheck DNA Ladders

Bullseye Pre-stained Protein Ladder, 10-180 kDa

• Ready to use - no boiling necessary
• Stable at ambient temperature
• 2 reference bands - red at ~75kDa and green at ~25kDa
• Use 5-15µl, depending on the size of the wells
• No freeze-thaw involved
• Broad range ladder

Application: The Bullseye Pre-stained Protein Ladder is suitable for visualizing proteins during electrophoresis without staining and for monitoring transfer onto membrane.

The Bullseye Pre-stained Protein Ladder contains 10 prestained proteins, covering a wide range of molecular weights from 10 to 180kDa. It is designed for monitoring protein separated during polyacrylamide gel electrophoresis, verification of Western transfer efficiency on membranes and for sizing of proteins. The ladder is supplied in protein gel loading buffer and is ready-to-use. No need to heat, dilute, or add reducing agent before loading. One prominent feature of this protein ladder, is that it remains in the liquid state at the storage temperature; therefore, there is not a freeze-thaw cycle involved, making the ladder very stable.

Contents:
0.1~0.4 mg/ml of each protein in 20 mM Trisphosphate (pH 7.5 at 25°C), 2% SDS, 1 mM reducing reagent, 3.6 M Urea, and stabilizer.

Usage:
For each application, 5-15µl is needed, depending on the size of the wells.

Quality Control:
Tested in polyacrylamide gel electrophoresis and Western Blotting.

Storage: -20 °C.

Note for image: