|◀ 409 - 420 of 562 ▶|
View:

Enduro 20 x 20 cm Horizontal Gel Rig

  • Molded, durable construction
  • Rubber gates for easy, tapeless gel casting
  • Adjustable height combs
  • Loading guides aid in well visualization

Enduro Horizontal Gel Boxes have been designed for ease of use, safety and durability. A variety of sizes are available, from a mini gel system to a large maxi gel system that can accommodate as many as 450 samples in a single run. A wide range of accessories are available to customize your system, including multichannel compatible gel combs.

QUALITY CONSTRUCTION - The Enduro gel tanks are molded for leakproof performance and a long service life. The corrosion resistant platinum electrodes are located in cassettes to protect them during cleaning and provide for easy replacement. The lids fit on the gel boxes in only one direction. A drip ring on the lid recycles condensed buffer and prevents it from dripping directly onto the gel.

EASE OF USE - Casting gels for the Enduro system is very easy. Simply snap the rubber gates onto the ends if the tray, place the comb in position and pour the gel - no taping is necessary. Slots on the sides of the gel trays hold the combs in place. The two piece combs are designed so that the teeth can be raised or lowered to vary the depth of the well within the gel. The supplied combs are 1.5 mm thick. Combs of other thicknesses are available separately. After the gel has hardened, the combs and gates are removed and the gel and tray placed in the gel box. Loading strips may be placed on the bottom of the gel box to aid in well visualization. Gel trays are UV transparent.

DESIGNED FOR SAFETY - The power leads for the Enduro system are attached to the gel box lid. The connection with the electrodes is made only when the lid is properly in place. Removal of the lid removes power from the system. Side tabs and pressure pads make lid removal easy and prevent sloshing of buffer.

Specifications

ItemEnduro 7.7Enduro 7.10Enduro 10.10Enduro 15.10Enduro 15.15Enduro 20.20
Unit Dims9 x 21 x 9 cm9 x 21 x 9 cm12.5 x 22 x 9 cm17.5 x 26.5 x 9 cm17.5 x 26.5 x 9 cm23 x 39.5 x 9 cm
Gel Size7 x 7 cm7 x 10 cm10 x 10 cm15 x 10 cm15 x 15 cm20 x 20 cm
Max Samples3264100140210450
Buffer Vol225 mL225 mL300 mL500 mL500 mL1200 mL
Combs
Included
(2) 8 tooth combs(3) 8 tooth combs(2) 10 tooth combs(1) 16 tooth comb,
(1) 20 tooth comb
(1) 16 tooth comb,
(1) 20 tooth comb,
(1) 28 tooth comb
(2) 40 tooth combs,
(2) 20 tooth combs

Combs for E1015-10 & E1015-15
 

Item#:
ASPCRELCTP20

 
Western Blot Boxes

  • The perfect box for every blot
  • Reduce antibody usage
  • The hinged Lid minimizes evaporation
  • For halves, wholes, strips, or minis

 

No matter what size your Western blot is, there's a box that fits it perfectly. With boxes that are correctly matched to common blot sizes, you can fit more blots on shakers/rockers while keeping reagent and antibody usage to an absolute minimum. Additionally, all corners are formed at 90° angles and the bottom surface is uniformly flat, further reducing consumption of costly reagents and antibodies (for example, popular mini gels require only about 4 mL).


At a price that makes them truly disposable, all sizes are engineered from crystal clear polystyrene. The exception is our opaque black boxes (except WBB7BK and WBB15BK), which protect light-sensitive samples. All sizes are also equipped with an easy-to-open hinged lid that reduces evaporation.

 

Specifications
 

Item #DescriptionMinimum VolDimensions
WBB3Western Blot Box, Micro-strip, Clear, 5/pk1 mL7.3 x 3.0 x 1.9 cm
WBB5Western Blot Box, Mini-rectangle, Clear, 5/pk3 mL7.3 x 5.1 x 3.2 cm
WBB7Western Blot Box, Medium Rectangle, Clear, 5/pk4 mL8.9 x 6.5 x 2.5 cm
WBB7BKWestern Blot Box, Medium Rectangle, Black, 5/pk4 mL8.9 x 6.5 x 2.5 cm
WBB9Western Blot Box, Long Strip, Clear, 5/pk2 mL9.5 x 3.0 x 1.6 cm
WBB11Western Blot Box, Medium Strip, Clear, 5/pk3 mL11.1 x 5.2 x 4.7 cm
WBB13Western Blot Box, Large, Clear, 5/pk6 mL11.7 x 8.9 x 2.8 cm
WBB15Western Blot Box, Square, Clear, 5/pk7 mL11.4 x 11.4 x 3.2 cm
WBB15BKWestern Blot Box, Square, Black, 5/pk7 mL11.4 x 11.4 x 3.2 cm
WBB17Western Blot Box, Extra Large, Clear, 5/pk11 mL15.2 x 10.2 x 3.2 cm
WBB19Western Blot Box, XXL, Clear, 5/pk12 mL15.2 x 10.2 x 5.1 cm
WBB13-8BKRemovable Lid, Opaque Black, for Novex MinigelN/A8.6 x 8.6 x 2.8cm

 

 

Item#:
ASBLOTBX2
While Supplies Last!


This brand is being discontinued and will only be available while supplies last.

Need a great DNA Ladders at a great price?

Try our PR1MA™ SmartCheck DNA Ladders

 

Bullseye Pre-stained Protein Ladder, 10-180 kDa

  • Ready to use - no boiling necessary
  • Stable at ambient temperature
  • 2 reference bands - red at ~75kDa and green at ~25kDa
  • Use 5-15µl, depending on the size of the wells
  • No freeze-thaw involved
  • Broad range ladder

Application: The Bullseye Pre-stained Protein Ladder is suitable for visualizing proteins during electrophoresis without staining and for monitoring transfer onto membrane.

The Bullseye Pre-stained Protein Ladder contains 10 prestained proteins, covering a wide range of molecular weights from 10 to 180kDa. It is designed for monitoring protein separated during polyacrylamide gel electrophoresis, verification of Western transfer efficiency on membranes and for sizing of proteins. The ladder is supplied in protein gel loading buffer and is ready-to-use. No need to heat, dilute, or add reducing agent before loading. One prominent feature of this protein ladder, is that it remains in the liquid state at the storage temperature; therefore, there is not a freeze-thaw cycle involved, making the ladder very stable.


Contents:
0.1~0.4 mg/ml of each protein in 20 mM Trisphosphate (pH 7.5 at 25°C), 2% SDS, 1 mM reducing reagent, 3.6 M Urea, and stabilizer.

Usage:
For each application, 5-15µl is needed, depending on the size of the wells.

Quality Control:
Tested in polyacrylamide gel electrophoresis and Western Blotting.

Storage: -20 °C.

Note for image:

The apparent molecular weight of each protein (kDa) has been determined by calibration against an unstained protein ladder in each electrophoresis condition.

Item#:
ASBULLEYEPRESTAIN

Glow Writer is a fine-point phosphorescent ink marking pen for making experimental notations and other markings on chemiluminescent and radioisotope-labeled substrate materials (e.g., transfer membranes, dried gels, genomic and proteomic matrices, etc.) being analyzed by X-ray film autography or electronic imaging. The unique marker delivers a phosphor-containing ink through a fine point porous nib. Before exposure to X-ray film, the phosphorescent writing is excited by room light. A phosphor ink having an optimum concentration of phosphor and a relatively short afterglow halflife (approximately 2-3 minutes) has been selected so that upon exposure to X-ray film,autographic exposures of almost any duration will be easily readable on the film. The fine point nib is easily replaceable if it dries out.

Fine-Point Phosphorescent Marking Pen for Laboratory Autography

  • Fine Point Nib- Provides fine writing and greater information density
  • Specially Designed- Ideal glow intensity and afterglow duration helps prevent over-andunder exposure
  • No Ink Clogs- Low ink viscosity and porous nib prevents ink from clogging
Item#:
GLWR-1000
Your Price:
66.67
Each
Glow Writer, 4/pk

Glow Writer is a fine-point phosphorescent ink marking pen for making experimental notations and other markings on chemiluminescent and radioisotope-labeled substrate materials (e.g., transfer membranes, dried gels, genomic and proteomic matrices, etc.) being analyzed by X-ray film autography or electronic imaging. The unique marker delivers a phosphor-containing ink through a fine point porous nib. Before exposure to X-ray film, the phosphorescent writing is excited by room light. A phosphor ink having an optimum concentration of phosphor and a relatively short afterglow halflife (approximately 2-3 minutes) has been selected so that upon exposure to X-ray film,autographic exposures of almost any duration will be easily readable on the film. The fine point nib is easily replaceable if it dries out.

Fine-Point Phosphorescent Marking Pen for Laboratory Autography

  • Fine Point Nib- Provides fine writing and greater information density
  • Specially Designed- Ideal glow intensity and afterglow duration helps prevent over-andunder exposure
  • No Ink Clogs- Low ink viscosity and porous nib prevents ink from clogging
Item#:
GNIB-1000
Your Price:
11.28
Each

Western Lightning Plus (NEL103):
·  Twice the sensitivity of standard products 

·  Direct protocol transfer 

·  ~ 1 picogram sensitivity

·  > 2 hr signal duration for re-exposing film

·  Working solution stability 8 hr at room temperature 

·  PVDF or Nitrocellulose membranes 

·  Non-toxic (no msds required)

 

Western Lightning Pro (NEL120)
·  Mid-range sensitivity, with broad dynamic range

·  Detection of less than 1 picogram amount of protein

·  Long, stable signal > 12 hr for re-exposing film 

·  Stable at room temperature >1 year 

·  Working solution stable for > 24 hr at room temperature

·  Non-toxic (no msds required) 

·  PVDF or Nitrocellulose membran
Item#:
ASWESTERNKITE

Western Blot 2.0 with PURITY


The PURITY detection system revolutionizes Western Blotting in three steps.
 

Blocking buffer and secondary antibody are already components of the PURITY Reagent. And the washing buffer is also included. The only thing to add is your specific primary antibody.


Benefits:

  • 1 simple protocol which makes almost all optimization unnecessary.
  • Increased sensitivity and reproducibility of blots.
  • Dramatically reduces the number of steps and time required for Western blots.
  • Drastically decreases background phenomena.
  • Highly reliable.
Item#:
ASWESTBLOTACC
IB01010
6X Loading Dye

    • Used for agarose electrophoresis of DNA, RNA or nucleic acids
    • Contains 3 tracking dyes and 15% Ficoll in a special Tris dye
      • Light blue - around 4000bp in 1% agarose
      • Indigo - around 600bp in 1% agarose
      • Magenta - around 150bp in 1% agarose
    • DNase/RNase/Protease free

IB01015
5X RNA Gel Loading Kit

  • Reagents for denaturing and loading RNA samples onto a formaldehyde gel, using MOPS as a buffer
  • RNA sample is dissolved in 10µl of DEPC water and mixed with 35µl of denaturing solution. Heat the sample to 65°C for 5 min. Once the solution has cooled, add 5µl of loading dye. The sample is now ready to load into the gel.
  • DNase/RNase/Protease free

IB01190
2X Protein Loading Dye

    • Tracks the migration progression of your sample during polyacrylamide electrophoresis
    • Loading dye migrates independently of the samples, making it easier to estimate the migration of proteins
    • DNase/RNase/Protease free

IB72120
Xylene Cyanol FF

    • Used as a tracking dye at 5kb to monitor the progress of electrophoresis separation
    • CAS Number: 2650-17-1
    • DNase/RNase/Protease free

IB74040
Bromophenol Blue

  • Tracking dye in electrophoretic separations
  • Migrates around 0.5kb
  • CAS Number: 115-39-9
  • Purity: >98.0%
Item#:
ASGELLDDYES

RunBlue SDS Running Buffer (NXB50500) a TEO-Tricine buffer system which provides a separation similar to the MOPS buffer used with BIS-TRIS precast gels. It provides enhanced separation of higher molecular weight proteins. The buffer can be for reduced and non-reduced samples.

RunBlue TGS Blot Buffer(NXB82600) has been specially formulated to provide optimal blot transfer of proteins from RunBlue Precast Gels. Supplied as a concentrate should be diluted by a factor of 10 for use with the RunBlue Dual Run and Blot system or a factor of 20 for use with other blotting methods.

Item#:
ASPRECASTG
Polyolefin, 2.8 mil, Ultra-

These optically clear polyester films are ideally suited for Real Time PCR (qPCR). They feature an inert, ultra-clear, and strong encapsulated silicone adhesive that provides extraordinary performance in real-time PCR applications.

Encapsulated silicone greatly reduces the risk of sample contamination due to exposure to adhesive. Once the film is pressed onto the plate, the raised portion of the well penetrates the encapsulation and a tight seal is formed on just that surface (not over the sample). This silicone seal adheres aggressively and diminishes the possibility of "Edge Effect".

The plasticized backing of this film is scored on both ends to allow for two handed (precise) placement on the plate. Both film and adhesive maintain incredible clarity and are the choice for highly demanding manual and automated processes.

Certified free of RNase, DNase, Pyrogen, and nucleic-acid contamination.

Length

141.27 mm

Length (w/ end tabs removed)

117.5 mm

Width

77.8 mm

Overall Thickness

2.8 mil

Adhesive Thickness

2.0 mil

Material

Polyester

Adhesive

Encapsulated Silicone

Max. Temperature

120 °C

Min. Temperature

-40 °C

Primary Usages

Real Time PCR (qPCR), PCR

Item#:
MID-UC500
Your Price:
1114.00
Each

The polyester films are a great general purpose seal; ideal for sample protection and elimination of well-to-well sample cross contamination. The acrylic adhesive offers a strong bond that seals tightly on polypropylene and polystyrene plates.

This seal is ideally suited for short term storage, Elisa assays, prevention of sample loss, and general lab usage.

The paper backing of this film is scored on both ends to allow for two handed (precise) placement on the plate.

For PCR applications see our standard PCR film or our Real Time PCR film.

For applications where accessing samples through the seal with pipet tips or a probe is required, see the pierceable aluminum (MID-PCR-200) film.

Certified free of RNase, DNase, Pyrogen, and nucleic-acid contamination.

Length

146.05 mm

Length (w/ end tabs removed)

119.05 mm

Width

79.38 mm

Overall Thickness

3.1 mil

Adhesive Thickness

1.1 mil

Material

Polyester

Adhesive

Medical Grade Acrylic

Max. Temperature

120 °C

Min. Temperature

-40 °C

Primary Usages

Elisa, Storage or Sample Cover

Item#:
MID-PCR-TS
Your Price:
195.00
Each
This item is discontinued
|◀ 409 - 420 of 562 ▶|
View: