S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
PR1MA™ Sealing Mats
PR1MA™ 96-Well PCR Sealing Mats are made of silicone, dimensions are 4.67 in. (L) x 2.90 in. (W).
- Pierceable
- Designed for an evaporation-resistant seal to minimize sample loss
- For use in medical, pharmaceutical, food industries, and molecular biology
- Certified free of detectable RNase, DNase, DNA, and PCR inhibitors
Proudly made in the USA! Click here for more made in America products!
Item#:
ASPR1MAPCRMAT
SealPlate® RollMate™ Pre-scored Film
Convenient, Easy-to-Use Roll format.Pre-scored film on a roll is a more economical and efficient alternative to rapidly seal microplates or racked test tubes; faster than applying single sheeted film. Self-standing, non-slip supports hold the pre-scored film roll securely in place for quick and easy bench-top dispensement. The roll unwind tension can be easily adjusted to user preference. Continuous backing liner can be torn off or fed directly into a waste basket for disposal.
- Economical
- Quicker, more efficient sealing
- Provides a secure seal and is easy to remove
- Rigid polyester film features good clarity and easy handling
- Can be used as a temporary seal while awaiting further processing
Applications
- General laboratory use
- Short-term storage
- Incubation
- ELISA
Temperature Range
Proudly made in the USA! Click here for more made in America products!
- -40°C to +120°C
Proudly made in the USA! Click here for more made in America products!
EZcap™FoilStrips
An economical and more user-friendly alternative to PCR strip caps; no sore thumbs and fingers guaranteed!Application: PCR and light sensitive assays
Temp. Range: -20°C to +120°C
Proudly made in the USA! Click here for more made in America products!
Precision cut to a smaller dimension for sealing one PCR 8-tube strip or a single row of a 96-well PCR or deep-well storage plate whenever rows must be
selectively protected or accessed. FoilStrips remove easily with no splash back as can occur with strip-caps.
- Certified DNase- & RNase- free
- Each sheet contains 6 strips on a continuous liner for ease of use
- Pierceable with a pipet tip or robotic probe for direct sample recovery
- The conformable nature of foil allows for the visual verification of the seal’s security around each well
- 2.0 mil aluminum foil removes easily without tearing
Helpful Tips:
- A non-locking workstation is recommended for sample prep (e.g. 96-well round-boom plate)
- Removal of the end-tabs at the perforations is recommended before cycling
- A final sealing step is highly recommended in the thermal cycler because 8-tube strips flex during handling
- Do not fold foil around sides of tubes
Proudly made in the USA! Click here for more made in America products!
AlumaSeal® CS™
With a 50 uM layer of acrylic adhesive that withstands cold storage at temperatures to -80 °C.
Unlike other sealing films in the AlumaSeal® group, AlumaSeal® CS™ sealing films are not recommended for PCR or thermocycling. A single non-perforated end tab simplifies application. Simply hold the tab and strip the backing from the body of the sealing film as it lays on the plate to avoid curling. Dimensions are 82.6 by 132.6 mm, including the single 9.5 mm end tab. AlumaSeal® CS™ sealing films are certified DNase-, RNase-, and nucleic-acid-free.
- Specially formulated for cold storage to -80 °C
- Excellent barrier properties to retard evaporation
- Easily pierceable with pipet tips or robotic probes for sample recovery
*Completing application of AlumaSeal® CS™ sealing films by pressing with the accessory plate roller assures a secure uniform seal around all wells.
Proudly made in the USA! Click here for more made in America products!
Proudly made in the USA! Click here for more made in America products!
FoilSeal™ RollMate™ Dispenser +1 Roll of FoilSeal™ Film
500 Pre-Scored Sheets.
Pre-scored film on a roll is a more economical and efficient alternative to rapidly seal microplates; faster than applying single sheeted film. Self-standing, non-slip supports hold the pre-scored film roll securely in place for quick and easy bench-top dispensement. The roll unwind tension can be easily adjusted to user preference. Continuous backing liner can be torn off or fed directly into a wastebasket for disposal.
- Certified DNase- & RNase- free
- Pierceable with a pipet tip or robotic probe for direct sample recovery
- 2.0mil aluminum foil removes easily without tearing
- The conformable nature of foil allows for the visual verification of the seal’s security around each well
- Not recommended for long-term cold storage
Applications
- PCR
- Light sensitive assays
- Short-term storage
- Robotics
Temp. Range
- -20°C to +120°C
Helpful Tips
- End-tab removal before thermal cycling is highly recommended
- Remove diagonally from a corner to prevent tearing
Proudly made in the USA! Click here for more made in America products!
ThermalSeal® 2™ and ThermalSeal® Advanced Sealing Film
ThermalSeal® 2™ and ThermalSeal® Advanced feature a soft, extra thick, conformable adhesive that forms a very strong seal around raised wells to minimize evaporation and cross-contamination.
- Certified DNase- & RNase- free
- Ideal for use with flat-top, semi-skirted and full-skirted PCR plates
- Compatible with hard-shell dual component (e.g. polycarbonate/polypropylene) PCR plates
- Large cut allows for easier positioning of the film to the plate via edge of plate alignment vs. centering
- Available in a smaller cut for raised-rim and non-skirted PCR plates: ThermalSeal® Advanced
Application
- PCR
Temp. Range
- -40°C to +120°C
Helpful Tips
- Selection of the proper film size will minimize evaporation
- The film should not overhang or ride up the wall of a raised-rim plate
- More complete coverage of skirted flat-top plates will reduce evaporation in the outer wells
- End-tab removal before thermal cycling is highly recommended
Proudly made in the USA! Click here for more made in America products!
Zone-Free™ Multilayer Film
Zone-Free™ is a multilayer film consisting of a top pierceable clear polyethylene film and a white polypropylene sublayer with 96 circular areas void of adhesive.
Application: Short-term storage and robotics
Temp. Range: -40°C to +90°C
Proudly made in the USA! Click here for more made in America products!
The white sublayer aids in the alignment of the film to the plate; alignment of opposing corner wells ensures that all 96 wells will be properly aligned. The adhesive-free zones are 9mm on center to facilitate multi-channel pipetting without adhesive fouling of pipet tips or robotic probes.
- Pierceable
- Offers excellent chemical resistance
- Samples have minimal contact with adhesive due to the adhesive-free zones
Proudly made in the USA! Click here for more made in America products!
ThinSeal™ Sealing Film
Ultra-thin, Semi-pierceable Sealing Film. Leaves minimal residue.
- Clear polyester film usable with polystyrene or polypropylene plates
- Marginally pierceable by single-channel pipets and probes
- Reduces evaporation, cross-contamination and spillage
- Removes easily and cleanly while reducing aerosols
Temp. Range: -40°C to 120°C
Proudly made in the USA! Click here for more made in America products!
Item#:
ASTHINSEALSFI
ThermalSeal® Sealing Film
ThermalSeal® features a moderate strength adhesive for ease of removal.- Certified DNase- & RNase- free
- Only recommended for structurally rigid polypropylene PCR plates that don’t warp
- A less rigid polypropylene film that minimizes aerosols upon removal
- Features good chemical resistance
Application
- PCR
- General storage
Temp. Range
- -40°C to +120°C
Proudly made in the USA! Click here for more made in America products!
X-Pierce™ Sealing Film
For Re-sealability and Easy Access Without Pipet Tip Coring.X-Pierce™ film is designed for short-term processing and storage of samples that require multiple access to wells by pipet tips or robotic probes. A pre-cut “X” over each well creates bendable flaps that provide sample access without coring or adhesive fouling of tips or probes. Ideal for COVID-19 sample collection in deep-well plates using swabs.
- Pierceable
- Printed circles aid in the alignment of the film to the plate
- Printed alphanumerics identify each well of a 96-well plate
- Reseals after piercing for continued sample protection
Helpful Tips
- To help position the film to the plate, align wells A-1 and H-12
Applications
- Short-term processing and storage at ambient temperatures
- Robotics
Temp. Range
- -40°C to +90°C
Proudly made in the USA! Click here for more made in America products!
AeraSeal™ SealMate™ Microplate Sealing Film Rolls
Starter Kits and Refills for Fast and Efficient Microplate Sealing.
The AeraSeal™ SealMate™ Starter Kit features a re-usable dispenser and two rolls of perforated film.
The dispenser facilitates the quick and easy dispensing of film from a roll allowing microplates to be sealed three times faster than using sheeted films. Cost-effective replacement rolls are sold separately. Ideal for use under the hood; the SealMate™ dispenser minimizes film contamination.
The dispenser facilitates the quick and easy dispensing of film from a roll allowing microplates to be sealed three times faster than using sheeted films. Cost-effective replacement rolls are sold separately. Ideal for use under the hood; the SealMate™ dispenser minimizes film contamination.
- Environmentally friendly; no paper liner to remove and discard; utilizes approximately 59% less material than AeraSeal™ sheeted film
- Each sheet is separated by an adhesive-free, perforated, color-coded red band
- The smooth lower surface of the dispenser can be used to seal the film to the plate
- Dispenser protects unused seals from contamination
- Lower support prop prevents dispensing bill from contacting surfaces to prevent contamination
- Replacement rolls can be easily installed by releasing the locking clasps on the dispenser
- Designed to facilitate air and CO2 exchange
- Pore size from 10 uM to 50 uM
- Moisture vapor transmission rate = 4,200g/m²/24hr
- Easy-to-pierce with serological pipets and pipet tips for direct sample recovery
Applications
- Cell culture
- Tissue culture
- Bacterial cultures
Temp. Range
- -20°C to +80°C
Proudly made in the USA! Click here for more made in America products!
ValueSeal™ Sealing Film
The most economical film for general laboratory use.ValueSeal™ features smaller dimensions and a single non-perforated end-tab to provide a more cost-effective alternative to protect samples from evaporation, external contamination, dust and particulates.
- Provides a secure seal and is easy to remove
- Rigid polyester film features good clarity and easy handling
- Can be used as a temporary seal while awaiting further processing
- General laboratory use
- Short-term storage
- Incubation
- ELISA
Web Content Viewer
Actions