S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
TiterSeal™ Sealing Film
Sample protection you can count on. Minimizes evaporation, prevents well-to-well contamination and spillage.
- Eliminates the “edge effect” which can occur with plate lids (e.g. greater evaporation in the outside plate wells)
- Provides a secure seal and is easy to remove
- Rigid polyester film features good clarity and easy handling
- Can be used as a temporary economical seal while awaiting further processing
- Features two end-tabs with perforations
Applications
- General laboratory use
- Short-term storage
- Incubation
- ELISA
SealPlate® ColorTab™ Sealing Film
For Sample Identification & Plate Labeling.
An inscribed color-coded end-tab can be removed and pasted
into a laboratory notebook while the other remains on the plate for
identification. The film sheet can be removed from the plate without disturbing
the identification label due to the finely perforated end-tabs. Choose from 5
different individual colors or the assortment pack.
- Provides a secure seal and is easy to remove
- Rigid polyester film features good clarity and easy handling
- Features two end-tabs with perforations
Applications
- General laboratory use
- Short-term storage
- Incubation
- ELISA
Temp. Range
- -40°C to +120°C
Proudly made in the USA! Click here for more made in America products!
eXTReme™ FoilSeal™
eXTReme™ FoilSeal™ is an aluminum foil seal that offers excellent chemical resistance and superior performance in ultra-low temperatures.Application: Long-term storage, light sensitive assays and robotics
Temp. Range: -80°C to +120°C
The smaller dimensions and chamfered corners result in no plate overhang for robotics applications; universal fit for use with all plate types (e.g. raised-rim and non-skirted). Or select our larger cut for greater plate coverage: eXTReme™ FoilSeal™, Large
- Certified DNase- & RNase- free
- Recommended for -80°C long-term storage
- Excellent chemical resistance (e.g. DMSO)
- Specially formulated adhesive provides an excellent seal to minimize evaporation and well-to-well contamination
- 1.9 mil thick aluminum foil removes easily without tearing and allows for visual verification of the seal’s security around each well
- Pierceable with a pipet tip for direct sample recovery
- Not recommended for PCR
Helpful Tips
- Remove diagonally from a corner to prevent tearing
- Selection of the proper film size will minimize evaporation
- More complete coverage of the plate will reduce evaporation in the outer wells
Proudly made in the USA! Click here for more made in America products!
EZcap™ PCR FilmStrips
An economical and more user-friendly alternative to PCR strip-caps; no sore thumbs guaranteed!
Application: PCR and short-term storage
Temp. Range: -20°C to +120°C
Proudly made in the USA! Click here for more made in America products!
Precision cut to a smaller dimension for sealing one PCR 8-tube strip or a single row of a 96-well plate whenever rows must be selectively protected or accessed. FilmStrips remove easily with no splash back as can occur with strip-caps.
- Certified DNase- & RNase- free
- Features an extra strong, thick adhesive to minimize evaporation
- Each sheet contains 8 strips on a continuous liner
Helpful Tips
- A non-locking workstation is recommended for sample prep (e.g. 96-well round-boom plate)
- Removal of the end-tabs at the perforations is recommended before thermal cycling
- A final sealing step is highly recommended in the thermal cycler because 8-tube strips flex during handling
Proudly made in the USA! Click here for more made in America products!
AlumaSeal® 384™ and 96™ Aluminum Foil Seal
Easy-to-pierce Aluminum Foil Seal for Direct Sample Recovery.
AlumaSeal® 384™ provides a secure seal for 384-well plates to minimize evaporation, reduce cross-contamination and prevent spillage.AlumaSeal® 96™ provides a secure seal for 96-well raised-rim and non-skirted PCR plates to minimize evaporation, reduce cross-contamination and prevent spillage.
- Certified DNase- & RNase- free
- Ideal for use with 384-well and deep-well plates (or select AlumaSeal® 96™ for smaller cut for raised-rim and non-skirted PCR plates.)
- Features one end-tab with no perforation
- Pierceable with a pipet tip or robotic probe for direct sample recovery
- Large cut allows for easier positioning of the foil to the plate via edge of plate alignment vs. centering
- Available in roll format for automation: AlumaSeal® Roll-Seal, 80 mm x 100 mm
- PCR
- Long-term storage
- Light sensitive assays
- Robotics
- -80°C to +120°C
- End-tab removal before thermal cycling is highly recommended
- Remove diagonally from a corner to prevent tearing
- Selection of the proper film size will minimize evaporation
- The film should not overhang or ride up the wall of a raised-rim plate
- More complete coverage of skirted flat-top plates will reduce evaporation in the outer wells
Proudly made in the USA! Click here for more made in America products!
AeraSeal™ Sealing Film
Designed to Facilitate Air and CO2 Exchange.
Designed to Facilitate Air and CO2 Exchange. AeraSeal™ features a hydrophobic, gas permeable membrane with a medical grade, non-cytotoxic adhesive. The porous membrane consists of layers of heat welded rayon fibers.
- Pore size from 10 uM to 50 uM
- Moisture vapor transmission rate = 4,200 g/m²/24 hr
- Easy-to-pierce with serological pipets and pipet tips for direct sample recovery
- Available in roll format for automation: AeraSeal™ Roll-Seal
Applications
- Cell culture
- Tissue culture
- Bacterial cultures
Temp. RangeProudly made in the USA! Click here for more made in America products!
- -20°C to +80°C
Proudly made in the USA! Click here for more made in America products!
SealPlate® SealMate™ Rolls
For Fast and Efficient Microplate Sealing. The SealMate SealPlate Starter Kit features a re-usable dispenser and two rolls of perforated film.
The dispenser facilitates the quick and easy dispensing of film from a roll allowing microplates to be sealed three times faster than using sheeted films. Cost-effective replacement rolls are sold separately. Ideal for use under the hood; the SealMate dispenser minimizes film contamination.
- Environmentally friendly; no paper liner to remove and discard; utilizes approximately 72% less material than SealPlate sheeted film
- Each sheet is separated by an adhesive-free, perforated, color-coded green band
- The smooth lower surface of the dispenser can be used to seal the film to the plate
- Dispenser protects unused seals from contamination
- Lower support prop prevents dispensing bill from contacting surfaces to prevent contamination
- Replacement rolls can be easily installed by releasing the locking clasps on the dispenser
- General laboratory use
- Short-term storage
- Incubation
- ELISA
- -40°C to +120°C
Proudly made in the USA! Click here for more made in America products!
Item#:
ASSEALMATEROLLS
General Purpose Sealing Film
For More Secure Seal to Minimize Evaporation.General Purpose polypropylene films offer superior barrier properties to minimize evaporation and prevent well-to-well contamination. Ideal for use with polypropylene plates.
- Certified DNase- & RNase- free
- Features good chemical resistance
- Provides a very secure seal to minimize evaporation, but is slightly harder to remove than SealPlate films
- Less rigid polypropylene film reduces aerosols upon removal
- Specially formulated adhesive minimizes plate residue
- Can be used as a temporary seal while awaiting further processing
Applications
- General laboratory use
- Short-term storage
- Incubation
- ELISA
SealPlate® Sealing Film
Industry Standard for Sample Protection.
SealPlate® minimizes evaporation, prevents well-to-well contamination and spillage. Eliminates the “edge effect” which can occur with plate lids (e.g. greater evaporation in the outside plate wells).
- Provides a secure seal and is easy to remove
- Rigid polyester film features good clarity and easy handling
- Can be used as a temporary economical seal while awaiting further processing
- Features two end-tabs with perforations
Applications
- General laboratory use
- Short-term storage
- Incubation
- ELISA
- -40°C to +120°C
Proudly made in the USA! Click here for more made in America products!
eXTReme™ 2 Seal Extra Strong Sealing Film
Extra strong adhesive minimizes evaporation without residue eXTReme™ Seal features an extra-strong thick adhesive to minimize evaporation, yet removes easily without leaving residue on the plate.
Application: PCR and robotics
Temp. Range: -20°C to +120°C
Product Info
Proudly made in the USA! Click here for more made in America products!
Application: PCR and robotics
Temp. Range: -20°C to +120°C
Product Info
- Features chamfered corners to eliminate plate overhang for robotics applications and tight storage conditions.
- Certified DNase- & RNase- free
- Next-generation adhesive formula provides better than-ever sample protection with improved evaporation rates
- Standard cut is ideal for use with raised-rim and non-skirted PCR plates
- Large cut is designed for greater plate coverage and easier positioning of the film to the plate
- Large cut is recommended for use with flat-top, semi skirted and full-skirted PCR plates as well as deep well plates
Proudly made in the USA! Click here for more made in America products!
AlumaSeal® II™ Easy-to-pierce Aluminum Foil Seal
Easy-to-pierce, Medical Grade Acrylic Adhesive.
AlumaSeal® II™ is a soft, non-permeable aluminum foil with a strong, medical-grade acrylic adhesive. Compared to other aluminum foils, AlumaSeal® II™ has less tendency to roll back on itself when removing the backing paper.
- Certified DNase- & RNase- free
- Excellent chemical resistance (e.g. DMSO)
- Easily pierceable with single or multichannel pipettors and robotic probes
- 1.4mil conformable aluminum foil allows visual verification of the seal’s security around each well
Applications
- PCR
- Long-term storage
- Light sensitive assays
- Robotics
Temperature Range
- -80°C to +120°C
Helpful Tips
- End-tab removal before thermal cycling is highly recommended
- Remove diagonally from a corner to prevent tearing
Proudly made in the USA! Click here for more made in America products!
FoilSeal™
Extra thick aluminum foil minimizes shredding upon removal
FoilSeal features a specially formulated adhesive that provides an excellent seal to minimize evaporation, reduce cross-contamination and prevent spillage.
Application: PCR, light sensitive assays and robotics
Temp. Range: -20°C to +120°C
Proudly made in the USA! Click here for more made in America products!
Universal fit for all plate types (e.g. flat-top, raised-rim and non-skirted); the smaller dimensions and rounded corners result in no plate overhang for robotics applications.
- Certified DNase- & RNase- free
- Pierceable with a pipet tip or robotic probe for direct sample recovery
- 2.0mil aluminum foil removes easily without shredding or tearing
- The conformable nature of foil allows for the visual verification of the seal’s security around each well
- Not recommended for long-term storage
Helpful Tips
- Remove diagonally from a corner to prevent tearing
Proudly made in the USA! Click here for more made in America products!
Item#:
ASFOILSEALTM
Web Content Viewer
Actions