S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Zone-Free™ Multilayer Film
- Pierceable
- Offers excellent chemical resistance
- Samples have minimal contact with adhesive due to the adhesive-free zones
Proudly made in the USA! Click here for more made in America products!
AeraSeal™ SealMate™ Microplate Sealing Film Rolls
Starter Kits and Refills for Fast and Efficient Microplate Sealing.
The dispenser facilitates the quick and easy dispensing of film from a roll allowing microplates to be sealed three times faster than using sheeted films. Cost-effective replacement rolls are sold separately. Ideal for use under the hood; the SealMate™ dispenser minimizes film contamination.
- Environmentally friendly; no paper liner to remove and discard; utilizes approximately 59% less material than AeraSeal™ sheeted film
- Each sheet is separated by an adhesive-free, perforated, color-coded red band
- The smooth lower surface of the dispenser can be used to seal the film to the plate
- Dispenser protects unused seals from contamination
- Lower support prop prevents dispensing bill from contacting surfaces to prevent contamination
- Replacement rolls can be easily installed by releasing the locking clasps on the dispenser
- Designed to facilitate air and CO2 exchange
- Pore size from 10 uM to 50 uM
- Moisture vapor transmission rate = 4,200g/m²/24hr
- Easy-to-pierce with serological pipets and pipet tips for direct sample recovery
- Cell culture
- Tissue culture
- Bacterial cultures
- -20°C to +80°C
Proudly made in the USA! Click here for more made in America products!
ThinSeal™ Sealing Film
Ultra-thin, Semi-pierceable Sealing Film. Leaves minimal residue.
- Clear polyester film usable with polystyrene or polypropylene plates
- Marginally pierceable by single-channel pipets and probes
- Reduces evaporation, cross-contamination and spillage
- Removes easily and cleanly while reducing aerosols
Temp. Range: -40°C to 120°C
Proudly made in the USA! Click here for more made in America products!
DuraSeal™ Sealing Film
- Durable, heat-resistant, solvent-proof laboratory sealing film
- Chemically resistant
- Heat resistant & Microwave compatible
- Tight sealing
- Tear resistant
DuraSeal™ is easy to use. There is no inter-leaf paper to strip away, just stretch the film symmetrically over a container opening and the 1.5 mil thick film contracts inwardly around the opening or neck of the container to provide a drum-tight, water-proof seal. The film can be elongated 500-800% before breakage. The film clings to itself, especially after stretching so the free edges of the film may be stretched around the container to secure the container edges.
Permeability Information
- Oxygen = 125cc/100in2/24hrs at 23°C
- Carbon Dioxide = 1300cc/100in2/24hrs at 23°C
- Water Vapor = 1.0g/100in2/24hrs at 38°C and 90% R.H.
Proudly made in the USA! Click here for more made in America products!
ContainerSeal™ Sealing Tape
ContainerSeal™ is a sealing tape designed for the vast range of bottles and containers used in laboratory applications. Its unique elastomeric characteristics allow it to stretch and conform around the irregular perimeters of containers lids and covers to form a tight seal. ContainerSeal™ will block water vapor loss, reduce the rate of gas exchange and prevent the entry of contaminants and can be easily removed from most surfaces without leaving adhesive residue.
Specifications
| Length | 1,296 In. | 32.92 mm |
| Width | 0.75 In. | 19.05 mm |
| Color | Yellow |
| U of M | Roll |
Proudly made in the USA! Click here for more made in America products!
1 x 8 FilmStrips™
For Sealing Only One 8-well Row of a 96-well Plate.
Designed for use with either 1×8 strip-well ELISA plates or standard 96-well plates where rows must be selectively protected or accessed. Ideal for COVID-19 testing to seal a row of 8 wells after swabs are deposited into a deep-well plate.- Certified DNase- & RNase- free
- A pliable polypropylene film minimizes aerosols upon removal
- Each sheet contains 8 strips on a continuous liner for ease of use
- Apply individually or two-at-a-time
- Use as a secondary film to seal previously pierced wells or to prevent accidental pipetting
- General laboratory use
- Incubation
- ELISA
BrightMax™ Sealing Film
White, light-reflecting, vinyl sealing film designed for use with white microplates.
- The light reflective properties on clear-bottom plates maximize the sensitivity of bioluminescence and chemiluminescence assays in bottom-reading luminometers
- Maximizes intensity and signal-to-noise ratios in luminescence assays
- May be used as a backing matrix for microscopy of punch-out samples for filter plates (e.g. ELISPOT assays)
- Features a single split liner for easy application
Applications
- Luminescence
- Fluorescence
- Microscopy
- -40°C to +80°C
Proudly made in the USA! Click here for more made in America products!
AbsorbMax™ Black Vinyl Sealing Film
AbsorbMax™ is a black vinyl sealing film for black microplaes that can be applied to either the top or bottom of the plate.- Minimizes background fluorescence and cross talk between plate wells
- Ideal as a back seal for black plates with clear well bottoms for top reading measurements
- Absorbs stray light, reducing the background caused by light scatter
- Protects light sensitive samples from degradation
- Features a single split liner for easy application
Applications
- Fluorescence assays
- Light sensitive sample protection
Temp. Range
- -40°C to +80°C
Proudly made in the USA! Click here for more made in America products!
Film-Sealing Paddles
- Sealing paddles complete the application of sealing films
- Press the film with the sealing paddle to assure a secure uniform seal around all wells of a microplate
- Paddles fit within the edge of raised-rim plates
- Sealing Roller completes the application of sealing films
- Press the film with the accessory plate roller assure a secure uniform seal around all wells of a microplate
Proudly made in the USA! Click here for more made in America products!
Multi-Swipe™ Plate-Sealing Paddles
For sealing flat-top and raised-rim plates.
Application: Plate-sealing
Material: Polyethylene
The Multi-Swipe plate-sealing paddle ensures a secure and uniform, pressure-sensitive seal around all wells and is an economical alternative to plate rollers. Plate-sealing paddles are designed for use with all plate types.
- Reusable, recyclable
- The semi-soft, pliable sealing surfaces prevent the film/foil from being torn or ripped
- The non-flat contoured side is designed to go down to the plate; the center raised textured surface provides a non-slip finger hold
- Features two sealing surfaces: the shorter length fits inside the walls of raised-rim plates; the longer length is ideal for flat-top and deep-well plates
- Features two unique sized corner radii: 1/8 inch (0.3175 centimeter) and 1/16 inch (0.1588 centimeter) to seal around the plate perimeter; the tighter radii is for use with raised-rim PCR plates
Helpful Tips
- The printed side is used to seal the film to the plate
- Multiple swipes of the sealing paddle in both directions is highly recommended
- A 10 minute or greater dwell time at room temperature before processing increases the film-to-plate bond
Proudly made in the USA! Click here for more made in America products!
Plate-Sealing Roller
Application: Plate-sealingMaterial: Rubber, metal
The plate-sealing roller features a smooth spinning, thermoplastic elastomer sealing surface with a durable plated metal handle.
- Reusable, autoclavable
- Provides a large 4 inch (10.16 cm) wide sealing surface
- A 10 minute or greater dwell me at room temperature before processing increases the film-to-plate bond
Proudly made in the USA! Click here for more made in America products!
PetriSeal™ Sealing Film
PetriSeal™ stretches and conforms to form a tight seal and is temperature resistant, waterproof and chemically resistant. It resists abrasion and puncture and blocks vapor loss while reducing the rate of gas exchange. Use PetriSeal™ with microtiter plates, Petri dishes and culture plates to prevent to entry of contaminants. The seal remains flexible down to -30°C and can withstand continuous exposure from -40°C to +77°C (with intermittent exposure up to 100°C). Tests have shown that PetriSeal™ leaves no adhesive residue even after two years.
- Colors: Blue, Clear, Red, White & Yellow
- Tape Size: 0.50 In. x 108 Ft.
Specifications
| Length | 2,160 In. | 54864 mm |
| Width | 0.50 In. | 12.7 mm |
| U of M | Roll |
Proudly made in the USA! Click here for more made in America products!
Web Content Viewer
Actions