PR1MA™ Acrylamide/bis-Acrylamide, 19:1 Ratio Solution

CAS Number: 79-06-1; 110-26-9; 7732-18-5
Storage Temp: 2-8°C

A 40% solution containing 38% (w/v) Acrylamide and 2% (w/v) bis-Acrylamide for a monomer to crosslinker ratio of 19:1.

WARNING! This product can expose you to Acrylamide, a chemical which is known to the State of California to cause cancer, developmental and reproductive harm. For more information go to www.P65Warnings.ca.gov.

Research or further manufacturing use only, not for food or drug use.

• Appearance: Clear, colorless liquid
• Conductivity of Solution: ≤ 10 µmhos
• DNase/ RNase: Not Detected
• Electrophoresis: Pass Test
• pH: Report

PR1MA™ Sodium Citrate, Trisodium Salt, Dihydrate, [Citric Acid, Trisodium Dihydrate]

Common Name: Citric Acid, Trisodium Dihydrate
CAS Number: 6132-04-3
Molecular Weight: 294.1
Chemical Formula: C₆H₅Na₃O₇  2H₂O
Solubility: Water
Storage Temp: Room Temperature

Research or further manufacturing use only, not for food or drug use.

• Appearance: White crystalline powder
• Assay: ≥ 99.0 %
• pH (5% Solution): 7.0 - 9.0
• Alkalinity: Pass Test
• Chloride: ≤ 50 ppm
• Heavy Metals : ≤ 10 ppm
• Identification Tests: Passes Tests
• Loss on Drying: 10.0 - 13.0 %
• Sulfate : ≤ 150 ppm
• Tertrate: Meets USP Test
• Grade: Meets current USP Specifications

Looking for replacement tubes? Check out PR1MA™ Microcentrifuge Tubes here! 

• High centrifuging to 20,000 x G
• Freezable (-80°C)
• Autoclavable
• Capacity: 1.5 mL
• ATP, RNase/DNase and Endotoxin Free (non-pyrogenic)
• Attached flat snap caps

SuperSlik® low retention microcentrifuge tubes have a low protein binding surface that minimizes sample loss during sample manipulation.  Ideal for applications such as mass spectrometry (ms), immunoprecipitation (IP), co-immunoprecipitation (Co-IP).  Leakproof snap caps may be penetrated by a syringe and will no pop open during autoclaving.  Compatible with many thermal cyclers and able to tolerate centrifuge speeds up to 20,000 RCF.

Proudly made in the USA! Click here for more made in America products!
  

Labcon Security Cups for Urine or Specimen Collection

• 100 mL Cups
• Sample spouts may be cut with scissors or pierced with a syringe
• Impact and pressure resistant seal

These security containers are designed to provide secure and reliable tamper-proof seals for specimens in transit or storage. After specimen collection the screw cap is tightened first by hand, then by the special wrench, which engages teeth on the lids rim to create a locked and leak-proof seal. To access the specimen for testing procedures, large or small sample spouts may be cut with scissors or pierced with a syringe. Spouts can be resealed with the large or small plugs and returned to storage for further testing. The impact-resistant, durably constructed, and pressure-resistant seal offers excellent protection during handling and transport. Made of non-reactive polyethylene resin.

Proudly made in the USA! Click here for more made in America products!
  

Labcon SuperSpin® Microcentrifuge Tubes

• Ultra-high centrifuging up to 40,000 x G*
• Optically clear resin
• Resin will not interfere with DNA or PCR
• For Phenol/Chloroform vortexing
• Reduced Thumb Force
• Autoclavable (122°C) and freezable (-80°C)
• Packaged in resealable bags
• Tubes have flat pierceable caps and a side writing surface
• Graduated

SuperSpin® microcentrifuge tubes were designed with the ability to extract DNA from samples and then amplify that DNA with reliable results in mind.  They can be trusted to spin at high rates and can be opened and closed easily many times to add or remove agents.  The interior surfaces are ultra-smooth with low retention.  The tubes are clear enough to be use in spectrophotometers and have no extractables at the wavelength ranges you use to detect DNA. SuperSpin® microcentrifuge tubes are more than twice as effective at transmitting light than most brands of micro centrifuge tubes.

*Maximum G-force can be affected by organic solvents, multiple spin cycles, or low temperature storage.

Proudly made in the USA! Click here for more made in America products!
 

Labcon LTS Style Low Binding Tips - Bulk Lid

SuperSlik® Low Retention tips have a proprietary modified polypropylene surface that limits the adhesion of cells, rDNA, proteins, and other viscous materials. Their accuracy and precision is up to 10 times better with viscous samples than standard non-wettable polypropylene. SuperSlik® tips are made from our own proprietary resin formulation that uses no additives or coatings that migrate into your samples. Unlike low retention tips from many others, SuperSlik® tips use no restricted chemicals and meet RoHS regulations. The resin helps increase the contact angle of fluids and lets you dispense the maximum amount of sticky DNA molecules. These tips were developed in our own laboratory and have been found to be ideal for viscous samples. Low retention tips are best suited for pipetting thick or sticky fluids and may not be appropriate for all uses.

1161 – SuperSlik® 10 uL Pipette Tips with UltraFine™ Point
1162 - SuperSlik® 10 uL Extended Length Pipette Tips with TubeGuard™
1165 - SuperSlik® 10 uLL Extra-Long Pipette Tips
1065 - SuperSlik® 200 uL Pipette Tips with BevelPoint™
1167 - SuperSlik® 100 uL Pipette Tips for Eppendorf® Pipettors
1164 - SuperSlik® 250 uL Wide Orifice Pipette Tips for Whole Cells
1166 - SuperSlik® 250 uL UltraFine™ Point Pipette Tips
1169 - SuperSlik® 300 uL Pipette Tips with BevelPoint™
1168 - SuperSlik® 1250 uL UltraFine™ Point Pipette Tips
1066 - SuperSlik® 20 uL Pipette Tips for Rainin® LTS™ Pipettors
1067 - SuperSlik® 250 uL Pipette Tips for Rainin® LTS™ Pipettors
1160 - SuperSlik® 300 uL Pipette Tips for Rainin® LTS™ Pipettors
1068 - SuperSlik® 1000 uL Pipette Tips for Rainin® LTS™ Pipettors 

Packaging

Proudly made in the USA! Click here for more made in America products!
 

PR1MA™ LB Agar, Low Salt Formula, Granulated [Lennox L Agar]

Common Name: Lennox L Agar
CAS Number: 91079-40-2, 8013-01-2, 7647-14-5, 9002-18-0
Solubility: Water with Heat
Storage Temp: Room Temperature

For propagation and maintenance of E. Coli.

Dissolve 32 grams in 1 Liter of distilled water and adjust the pH to 7.2. Sterilize by autoclaving for 15 minutes.

Ingredients:

• Casein Peptone: 10 g/L
• Sodium Chloride: 5 g/L
• Yeast Extract: 5 g/L
• Agar: 12 g/L

• DCM Appearance: Homogeneous Free Flowing ,Light Beige
• PPM Appearance: Clear, no to light ppt, light yellow
• pH (2.0% Solution @ 25 ^oC): 6.8 - 7.2
• Microorganism (E. coli ATCC 23724): Good to Excellent
• Microorganism (E. coli ATCC 33694): Good to Excellent
• Microorganism (E. coli ATCC 33849): Fair to Excellent
• Microorganism (E. coli ATCC 39403): Good to Excellent
• Microorganism (E. coli ATCC 47014): Good to Excellent
• Microorganism (E. coli ATCC 53868): Good to Excellent
• Sodium Chloride: 5 g/l
• Yeast Extract: 5 g/L
• Agar: 12 g/l
• Casein Peptone: 10 g/L

PR1MA™ LB Broth, Granulated [Lennox LB Broth]

Common Name: Lennox L Broth
Solubility: Water
Storage Temp: Room Temperature

For propagation and maintenance of E. Coli. Low Salt Formula. Molecular Biology Grade.

Dissolve 20 grams in 1 liter distilled water. Then adjust the pH to 7.2. Heat and frequently agitate to completely dissolve. Material is specially granulated to reduce dust and increase solubility rate. Sterilize by autoclaving for 15 minutes.

Ingredients:

• Tryptone:10 g/L
• Sodium Chloride: 5 g/L
• Yeast Extract: 5 g/L

Research or further manufacturing use only, not for food or drug use.

• Appearance: Light beige color, average particle size between 1 to 2mm
• DCM Appearance: Homogeneous, free flowing light beige
• PPM Appearance: Clear, no to light ppt, light yellow
• Appearance of Solution: Prepared medium is yellow to gold and clear to moderately hazy
• pH (2.0% Solution @ 25 ^oC): 6.8 - 7.2
• Microorganism (E. coli ATCC 23724): Good to Excellent
• Microorganism (E. coli ATCC 33694): Good to Excellent
• Microorganism (E. coli ATCC 33849): Fair to Excellent
• Microorganism (E. coli ATCC 39403): Good to Excellent
• Microorganism (E. coli ATCC 47014): Good to Excellent
• Microorganism (E. coli ATCC 53868): Good to Excellent
• Casein Peptone: 10 g/L
• Sodium Chloride: 5 g/L
• Yeast Extract: 5 g/L

PR1MA™  SOB Broth, Capsules

CAS Number: 91079-40-2; 8013-01-2; 7647-14-5; 7487-88-9; 7447-40-7
Solubility: Water
Storage Temp: Room Temperature

SOB Broth is recommended for use in cultivation of recombinant strains of E. Coli. It is a nutritionally rich growth medium for use in the preparation and transformation of competent cells.

Add two capsules to one liter of distilled water. Heat and stir gently to completely dissolve medium. Sterilize by autoclaving at 121°C for 15 minutes.

Final Solution contains:

• Casein Enzymic Hydrolysate: 20 g/L
• Yeast Extract: 5 g/L
• Sodium Chloride: 0.5 g/L
• Magnesium Sulfate: 2.4 g/L
• Potassium Chloride: 0.186 g/L

Research or further manufacturing use only, not for food or drug use.

• Appearance: Capsules
• Appearance of Solution: Prepared medium is light to medium amber and clear
• pH @25 °C: 6.8 - 7.2
• Microorganism (E. coli ATCC 23724): Good to Excellent
• Microorganism (E. coli ATCC 33694): Good to Excellent
• Microorganism (E. coli ATCC 33849): Good to Excellent
• Microorganism (E. coli ATCC 39403): Good to Excellent
• Microorganism (E. coli ATCC 47014): Good to Excellent
• Microorganism (E. coli ATCC 53868): Good to Excellent

SmartDoc™ 2.0 Imaging System

• Imaging enclosure works with all common smartphones
• System includes blue light illumination base, orange viewing cover, and orange photo filter
• Ideal for common safe stains (SmartGlow™, SYBR Green, GelGreen™, etc.)
• Visible blue light will not damage DNA
• Gel viewing and gel access for DNA band cutting
• Optional amber viewing glasses, for band excising
• Imaging enclosure can also be used on existing transilluminators

Introducing the SmartDoc™ 2.0 (Item no. E5001-SDB). This complete system has been developed for safely viewing nucleic acids in agarose gels and for capturing quality digital images with a smartphone camera.  Blue light is used instead of UV, which is safer for lab personnel and will not damage DNA samples.

The SmartDoc™ Imaging Enclosure can also be purchased separately (item no. E5000-SD) without the blue light illumination base.  The enclosure by itself can be used on most existing UV transilluminators or blue light transilluminators for smart phone imaging.

The illumination base emits an intense blue light with a peak output of 460 nm for optimum excitation of nucleic acids stained with green fluorescent dyes (SYBR® Green, SmartGlow™, GelStar™, GelGreen™, etc). The orange cover fits on top of the illumination base and acts as a filter to absorb blue light, allowing visualization of the fluorescing samples. The cover can also be set at an angle for gel access and cutting out DNA bands for further study.

The SmartDoc™ imaging enclosure includes an orange photo filter for photography of the gels with a smartphone. An extending adapter can be inserted for full dimension imaging of gels up to 15 x 15 cm or removed for close-up pictures. The enclosure can also be used directly on any other existing UV or blue light transilluminator.  Additional filters are available for imaging gels on a UV transilluminator.  Please see our “Filter and User Guide” to show which filter is best for different imaging applications.

Optional SmartBlue™ Plus Viewing Glasses

Accuris SmartBlue™ Plus Viewing Glasses offer exceptional protection for researchers working with bright blue LED and UV light illuminators. The polycarbonate filter lenses are shatter proof, scratch resistant and block light in the UV (280 nm) to blue (490 nm) wavelengths. In addition, they are compliant with ANSI Z87.1.

These glasses are ideal for general protection when working with hazardous wavelengths and for precision DNA band cutting on a UV or blue light transilluminator. While blocking hazardous UV and blue light, the glasses allow clear visualization of DNA bands stained with Ethidium Bromide, SmartGlow™, SYBR Green and other fluorescent dyes. 

*Always wear appropriate UV protection for eyes and exposed skin when working with UV light sources.     

Specifications 
 

Item # E5001-SDB is proudly made in the USA! Click here for more made in America products!
 

PR1MA™ LB Agar, Low Salt Formula, Powder [Lennox L Agar]

Common Name: Lennox L Agar
CAS Number: 91079-40-2, 8013-01-2, 7647-14-5, 9002-18-0
Solubility: Water with Heat
Storage Temp: Room Temperature

Molecular Biology Grade. For propagation and maintenance of E. Coli. Low Salt Formula.

Dissolve 35 grams in 1 Liter of distilled water. Adjust the pH to 7.2 Sterilize by autoclaving for 15 minutes

Ingredients:

• Casein Peptone: 10 g / L
• Sodium Chloride: 5 g / L
• Yeast Extract: 5 g / L
• Agar: 15 g / L

Research or further manufacturing use only, not for food or drug use.

• Appearance: Powder
• pH: 6.8 - 7.2
• Solubility: Clear Solution

Labcon LTS Style Low Binding Tips - Hinged Lid

SuperSlik® Low Retention tips have a proprietary modified polypropylene surface that limits the adhesion of cells, rDNA, proteins, and other viscous materials. Their accuracy and precision is up to 10 times better with viscous samples than standard non-wettable polypropylene. SuperSlik® tips are made from our own proprietary resin formulation that uses no additives or coatings that migrate into your samples. Unlike low retention tips from many others, SuperSlik® tips use no restricted chemicals and meet RoHS regulations. The resin helps increase the contact angle of fluids and lets you dispense the maximum amount of sticky DNA molecules. These tips were developed in our own laboratory and have been found to be ideal for viscous samples. Low retention tips are best suited for pipetting thick or sticky fluids and may not be appropriate for all uses.

1161 – SuperSlik® 10 uL Pipette Tips with UltraFine™ Point
1162 - SuperSlik® 10 uL Extended Length Pipette Tips with TubeGuard™
1165 - SuperSlik® 10 uL Extra-Long Pipette Tips
1065 - SuperSlik® 200 uL Pipette Tips with BevelPoint™
1167 - SuperSlik® 100 uL Pipette Tips for Eppendorf® Pipettors
1164 - SuperSlik® 250 uL Wide Orifice Pipette Tips for Whole Cells
1166 - SuperSlik® 250 uL UltraFine™ Point Pipette Tips
1169 - SuperSlik® 300 uL Pipette Tips with BevelPoint™
1168 - SuperSlik® 1250 UltraFine™ Point Pipette Tips
1066 - SuperSlik® 20 uL Pipette Tips for Rainin® LTS™ Pipettors
1067 - SuperSlik® 250 uL Pipette Tips for Rainin® LTS™ Pipettors
1160 - SuperSlik® 300 uL Pipette Tips for Rainin® LTS™ Pipettors
1068 - SuperSlik® 1000 uL Pipette Tips for Rainin® LTS™ Pipettors

Packaging

Bulk Pack
Tips are supplied in one large bag inside a corrugated container. These are not recommended for long term storage due to warping.

96 Rack
Offer workhorse reliability and versatility. They have heavy hook hinges that are extremely durable and an ergonomic snap-latch that won’t catch gloves. Smooth rounded edges and a reinforced seal make these racks durable additions to your lab. Strong enough to be autoclaved many times. The separate rack insert includes a beveled top an extra-sturdy surface for multi-channel pipetting. A vent in the rack sides allows steam autoclaving to be more efficient and assures your tips are sterile. The long thin design of the 192 rack allows for more working space on the lab bench.

Eclipse Refills

Proudly made in the USA! Click here for more made in America products!