S2K Commerce - Products Dropdown
ActionsS2K Commerce - Shopping Cart
ActionsS2K Commerce - Order Entry
ActionsThe I-Blue MINI Plasmid Kit was designed for rapid isolation of plasmid DNA from 1-7 mL of cultured bacterial cells. I-Blue Lysis Buffer (an optional color indicator) is included with the kit in order to prevent common handling errors, ensuring efficient cell lysis and neutralization. A modified alkaline lysis method and RNase treatment are used to obtain clear cell lysate with minimal genomic DNA and RNA contaminants. Typical yields are 20-35 µg for high-copy number plasmid or 3-10 µg for low-copy number plasmid from 4 mL of cultured bacterial cells. DNA phenol extraction or alcohol precipitation is not required and the entire procedure can be completed within 15 minutes. The purified plasmid DNA is ready for use in restriction enzyme digestion, ligation, PCR, and sequencing reactions.
Advantages
- Sample: 1-7 mL of cultured bacterial cells
- Yield: Up to 50 µg of pure plasmid DNA
- Format: Plasmid spin column
- Operation Time: Within 15 minutes
- Elution Volume: 30-100 µL
- Kit Storage: Dry at room temperature (15-25°C) for up to 1 year; PD1 and RNase A mixture should be stored at 2-8°C for up to 6 months
Quality Control
The quality of the I-Blue MINI Plasmid Kit is tested on a lot-to-lot basis by isolating plasmid DNA from a 4 mL overnight E. coli (DH5α) culture containing plasmid pBluescript (A600 > 2 U/mL). Following the purification process, a yield of more than 20 µg is obtained and the A260/A280 ratio is between 1.8-2.0. The purified plasmid DNA (1 µg) is used in EcoRI digestion, and analyzed by electrophoresis.
The I-Blue MINI Plasmid Kit was designed for rapid isolation of plasmid DNA from 1-7 mL of cultured bacterial cells. I-Blue Lysis Buffer (an optional color indicator) is included with the kit in order to prevent common handling errors, ensuring efficient cell lysis and neutralization. A modified alkaline lysis method and RNase treatment are used to obtain clear cell lysate with minimal genomic DNA and RNA contaminants. Typical yields are 20-35 µg for high-copy number plasmid or 3-10 µg for low-copy number plasmid from 4 mL of cultured bacterial cells. DNA phenol extraction or alcohol precipitation is not required and the entire procedure can be completed within 15 minutes. The purified plasmid DNA is ready for use in restriction enzyme digestion, ligation, PCR, and sequencing reactions.
Advantages
- Sample: 1-7 mL of cultured bacterial cells
- Yield: Up to 50 µg of pure plasmid DNA
- Format: Plasmid spin column
- Operation Time: Within 15 minutes
- Elution Volume: 30-100 µL
- Kit Storage: Dry at room temperature (15-25°C) for up to 1 year; PD1 and RNase A mixture should be stored at 2-8°C for up to 6 months
Quality Control
The quality of the I-Blue MINI Plasmid Kit is tested on a lot-to-lot basis by isolating plasmid DNA from a 4 mL overnight E. coli (DH5α) culture containing plasmid pBluescript (A600 > 2 U/mL). Following the purification process, a yield of more than 20 µg is obtained and the A260/A280 ratio is between 1.8-2.0. The purified plasmid DNA (1 µg) is used in EcoRI digestion, and analyzed by electrophoresis.
PCR DNA Clean-up Kit
The 96-well PCR Clean-Up/DNA Extraction Kits provide a high-throughput, rapid and economical method to purify DNA fragments. Chaotropic salt is used to denature enzymes and in this condition, DNA fragments are bound by the glass fiber matrix in each well of the plate. Once the contaminants have been removed, the purified DNA is eluted by a low salt elution buffer or water. Salts, enzymes, and unincorporated nucleotides are effectively removed from reaction mixtures without toxic phenol extraction or alcohol precipitation. This entire protocol can be completed in 30-40 minutes, and the eluted DNA is ready to use in restricted digestion, ligation, PCR, and sequencing reactions.
PCR DNA Clean-up Kit
The 96-well PCR Clean-Up/DNA Extraction Kits provide a high-throughput, rapid and economical method to purify DNA fragments. Chaotropic salt is used to denature enzymes and in this condition, DNA fragments are bound by the glass fiber matrix in each well of the plate. Once the contaminants have been removed, the purified DNA is eluted by a low salt elution buffer or water. Salts, enzymes, and unincorporated nucleotides are effectively removed from reaction mixtures without toxic phenol extraction or alcohol precipitation. This entire protocol can be completed in 30-40 minutes, and the eluted DNA is ready to use in restricted digestion, ligation, PCR, and sequencing reactions.
- Optimized for use with all of IBI 96-well kits
- The thin upper portion of the manifold is designed to reduce cross contamination
- Allows for the most effective extraction and purification of plasmid DNA, genomic DNA, viral DNA & RNA, total RNA and PCR products
- Materials: Manifold - made of anodized aluminum, Gasket - Ethylene propylene, O-Ring - Silicone
- Dimensions: 17x12x8cm
- Maximum vacuum: Approx. 71cm Hg (28 in Hg) (-13.7psi)
IBI MIDI I-Blue Plasmid Sample
The I-Blue MINI Plasmid Kit was designed for rapid isolation of plasmid DNA from 1-7 mL of cultured bacterial cells. I-Blue Lysis Buffer (an optional color indicator) is included with the kit in order to prevent common handling errors, ensuring efficient cell lysis and neutralization. A modified alkaline lysis method and RNase treatment are used to obtain clear cell lysate with minimal genomic DNA and RNA contaminants. Typical yields are 20-35 µg for high-copy number plasmid or 3-10 µg for low-copy number plasmid from 4 mL of cultured bacterial cells. DNA phenol extraction or alcohol precipitation is not required and the entire procedure can be completed within 15 minutes. The purified plasmid DNA is ready for use in restriction enzyme digestion, ligation, PCR, and sequencing reactions.
Advantages
- Sample: 1-7 mL of cultured bacterial cells
- Yield: Up to 50 µg of pure plasmid DNA
- Format: Plasmid spin column
- Operation Time: Within 15 minutes
- Elution Volume: 30-100 µL
- Kit Storage: Dry at room temperature (15-25°C) for up to 1 year; PD1 and RNase A mixture should be stored at 2-8°C for up to 6 months
Quality Control
The quality of the I-Blue MINI Plasmid Kit is tested on a lot-to-lot basis by isolating plasmid DNA from a 4 mL overnight E. coli (DH5α) culture containing plasmid pBluescript (A600 > 2 U/mL). Following the purification process, a yield of more than 20 µg is obtained and the A260/A280 ratio is between 1.8-2.0. The purified plasmid DNA (1 µg) is used in EcoRI digestion, and analyzed by electrophoresis.
The RNase-Free DNase I set ensures complete DNA removal from RNA extracted using IBI's RNA extraction kits for use in DNA sensitive downstream applications. This is an optional treatment as IBI's spin column technology yields RNA with the majority of DNA removed. Without using DNase treatment the extracted RNA can be used in downstream applications which are not DNA sensitive. This set can be used for both in column DNase digestion and DNase digestion in solution.
Sample Types: |
Blood, cultured cells, body fluids, and other animal cells |
Sample Size: |
5 x 10 cultured animal cells, 1 x 10 bacterial cells, or 300µl of blood |
Format: |
Spin columns |
Operation: |
Centrifuge/Vacuum |
Binding Capacity: |
Up to 60µg |
Time: |
30 minutes |
Applications: |
RT-PCR, Real-Time PCR, Northern Blotting, Primer Extension, RNAse Protection Assay, mRNA Selection, cDNA Synthesis |
Advantages
- Sample: Tissue, rodent tails, ear punches, fresh or frozen blood, serum, plasma, buffy coat, body fluids, cultured cells, amniotic fluid, FFPE, hair, insects
- Yield: Up to 5 µg of gDNA from fresh whole blood samples
- Format: genomic DNA spin column
- Operation Time: Within 20 minutes
- Elution Volume: 30-100 µL
- Kit Storage: Dry at room temperature (15-25°C) for up to 1 year
Introduction
The gMax Mini Kit is optimized for genomic, mitochondrial and virus DNA purification from whole blood (fresh blood and frozen blood), tissue, formalin-fixed paraffin-embedded tissue (FFPE), amniotic fluid and insects in one convenient kit. This DNA extraction kit uses Proteinase K and chaotropic salt to lyse cells and degrade protein, allowing DNA to bind to the glass fiber matrix of the spin column. Contaminants are removed using a Wash Buffer and the purified genomic DNA is eluted by a low salt Elution Buffer, TE or water. The entire procedure can be completed within 20 minutes without phenol/chloroform extraction or alcohol precipitation. The purified DNA (approximately 20-30 kb) is suitable for use in PCR or other enzymatic reactions.
Quality Control
The quality of the gMax Mini Kit is tested on a lot-to-lot basis by isolating genomic DNA from 200 μL of whole human blood. The purified DNA (5 μg with an A260/A280 ratio of 1.8-2.0) is quantified with a spectrophotometer and analyzed by electrophoresis.
Kit Components
Component |
IB47280 |
IB47281 |
IB47282 |
GST Buffer |
3 mL |
30 mL |
75 mL |
GSB Buffer |
4 mL |
40 mL |
75 mL |
W1 Buffer |
2 mL |
45 mL |
130 mL |
Wash Buffer* |
1 mL |
25 mL |
50 mL |
Proteinase K** |
1 mg |
11 mg x 2 |
65 mg |
Elution Buffer |
1 mL |
30 mL |
75 mL |
GD Columns |
4 |
100 |
300 |
2 mL Collection Tubes |
8 |
200 |
600 |
*Add absolute ethanol (see the bottle label for volume) to Wash Buffer then mix by shaking for a few seconds. Check the box on the bottle. Be sure and close the bottle tightly after each use to avoid ethanol evaporation.
**Add ddH2O to Proteinase K (see the bottle label for volume) then vortex to ensure Proteinase K is completely dissolved. Check the box on the bottle. Once it is dissolved completely, centrifuge for a few seconds to spin the mixture down. For extended periods, the ddH2O and Proteinase K mixture should be stored at 4°C.
- Sample: Gram (+) positive and Gram (-) negative bacterial cells
- Yield: Up to 30 µg of gDNA - (1 x 10 Escherichia coli: 25-30 µg, 1 x 10 Bacillus subtilis: 10-15 µg)
- Convenient: Includes Gram+ Buffer for preparing lysozyme solutions and to speed up sample preparation
- Format: Genomic DNA spin columns
- Operation Time: within 30 minutes
- Elution Volume: 50-200 µL
- Kit Storage: Dry at room temperature (15-25°C) for up to 1 year
The gBAC Mini DNA Bacteria Kit is optimized for genomic and viral DNA purification from Gram (-) negative and Gram (+) positive bacterial cells. Gram+ Buffer, when combined with lysozyme, will efficiently lyse bacterial cell walls consisting of the peptidoglycan layer. Chaotropic salt is used to further lyse cells and degrade protein, allowing DNA to easily bind to the glass fiber matrix of the spin column. Contaminants are removed using a Wash Buffer (containing ethanol) and the purified genomic DNA is eluted by a low salt Elution Buffer, TE or water. Phenol/chloroform extraction or alcohol precipitation is not required and the purified genomic DNA is ready for use in a variety of downstream applications.
Quality Control
The quality of the gBAC Mini DNA Bacteria Kit is tested on a lot-to-lot basis by isolating DNA from Escherichia coli (1x10) culture (OD600=1.3, 1 mL) harvested by centrifugation at 16,000 x g for 1 minute. 10 µL from a 50 µL eluate of purified DNA is analyzed by electrophoresis on a 1% agarose gel.
Items |
IB47290 |
IB47291 |
IB47292 |
Gram+ Buffer* |
1.5 mL |
30 mL |
75 mL |
GT Buffer |
1.5 mL |
30 mL |
75 mL |
GB Buffer |
2 mL |
40 mL |
100 mL |
W1 Buffer |
2 mL |
45 mL |
130 mL |
Wash Buffer** |
1 mL |
25 mL |
50 mL |
Elution Buffer |
1 mL |
30 mL |
75 mL |
GD Columns |
4 |
100 |
300 |
2 mL Collection Tubes |
8 |
200 |
600 |
*Add lysozyme to Gram+ Buffer immediately prior to use. Once lysozyme is mixed with Gram+ Buffer, the solution can be stored for 2 weeks at 4°C.
**Add absolute ethanol (see the bottle label for volume) to Wash Buffer then mix by shaking for a few seconds. Check the box on the bottle. Be sure and close the bottle tightly after each use to avoid ethanol evaporation.
IBI Gel/PCR Fragment Extraction Kits
The Large DNA Fragments Extraction Kit was designed to recover or concentrate DNA fragments (> 8 Kb) from agarose gel in 4 easy steps. Salts and enzymes can be effectively removed from the reaction mixture without phenol extraction. Typically, recoveries are up to 85% for Gel Extraction. The entire procedure can be completed in 45 minutes and the DNA is ready for use in PCR, Fluorescent or Radioactive Sequencing, Restriction Enzyme Digestion, DNA Labeling and Ligation.
Specifications
Sample | agarose gel |
Recovery | up to 85% |
Format | spin column |
Operation time | 45 minutes |
Efficient Gel Extraction and PCR Clean-up
The Gel/PCR DNA Fragments Extraction Kits are designed to recover or concentrate DNA fragments (50bp-10kb) from agarose gel, PCR reaction, or any other enzymatic reaction. This method uses a chaotropic salt and guanidine thiocyanate to dissolve the agarose gel and denature the enzymes. The DNA fragments in the chaotropic salt are bound to the glass-fiber matrix of the spin column. After washing off the contaminants, the purified DNA fragments are eluted by low salt elution buffer or water. Salts, enzymes, and unincorporated nucleotides can be effectively removed from the reaction mixture without phenol extraction or alcohol precipitation.
Sample: |
up to 300mg agarose gel slice
up to 100µl PCR product or other enzymatic reaction |
Format: |
Spin columns |
Operation: |
Centrifuge/Vacuum Manifold |
Binding Capacity: |
10µg DNA |
Expectant Yield: |
80-90% for gel extraction
90-95% for PCR clean-up |
Operational Time: | 15min. for PCR clean-up/20min. for gel extraction |
Applications: |
PCR, Fluorescent or Radioactive Sequencing, Restriction Digests, DNA Labeling, Ligations |