|◀ 13 - 17 of 17 ▶|
View:


PetriSeal Sealing Film

 

PetriSeal stretches and conforms to form a tight seal and is temperature resistant, waterproof and chemically resistant. It resists abrasion and puncture and blocks vapor loss while reducing the rate of gas exchange. Use PetriSeal with microtiter plates, Petri dishes and culture plates to prevent to entry of contaminants. The seal remains flexible down to -30°C and can withstand continuous exposure from -40°C to +77°C (with intermittent exposure up to 100°C). Tests have shown that PetriSeal leaves no adhesive residue even after two years.

  • Colors: Blue, Clear, Red, White & Yellow
  • Tape Size: 0.50 In. x 108 Ft.

Specifications
 
Length2,160 In. | 54864 mm
Width0.50 In. | 12.7 mm
U of MRoll
 

Proudly made in the USA! Click here for more made in America products!
 
 

Item#:
ASSEAL4

Accuris SmartReader™ UV-Vis Microplate Reader
 
The Accuris SmartReader™ UV-Vis Microplate Reader (model MR9610) has been designed with ease-of-use and fast results in mind. This instrument brings extensive capabilities to the lab bench and is designed for the busy lab with multiple users. The large touch screen command center is extremely user-friendly and allows for fast set up of new protocols, as well as modifying and running existing protocols.

  • Intuitive, 10-inch color touch screen control panel
  • Accepts both 96 & 384-well plates
  • Monochromator-based system
    • No filters required
    • Wavelength range from 200 to 1000 nm
  • Stand-alone design
    • No PC or special software required
    • USB port for flash drive data transfer


Monochromator technology … no filters needed

The monochromator-based optical system allows for precise selection of wavelengths from 200nm to 1000nm, with no filters required. This range makes the SmartReader UV-Vis™ useful not only for typical ELISA , Bradford Lowry, and turbidity assays but also for more advanced applications such as quantitation of nucleic acids and proteins. The SmartReader™ UV-Vis can be set for Endpoint, Kinetic and Spectral Scanning assays.

High Throughput Capability

The MR9610 is designed for efficient processing of multiple samples and
accepts standard 96 well plates as well as 384 well plates for high density
screening. The plate layout interface allows for a quick and intuitive setup of a plate well’s contents. Users can highlight and label multiple wells to save time. The display shows a graphical representation of the plate. Users can label each well as required for: “known standard”, “unknown sample”, “blank well” , “QC Control well”, “positive control”, “negative control”, and “empty”.

Optimized results with plate shaking and incubation

Controllable plate shaking and incubation allow for optimization of assay results. The shaking speed can be controlled at different intensities with options for timed and pulsed shaking before a reading, or in between readings when performing a kinetic assay. The linear motion efficiently and uniformly mixes all samples in both 96 and 384 well plates. Temperature can be controlled from ambient +5C up to 45C, allowing for the processing of enzyme kinetics, and bacterial growth assays.”


SmartDrop™ Accessory Plate

Absorbance measurements of exceptionally small volumes (<0.5ul) can be achieved using the SmartDrop™ Accessory Plate. The SmartDrop™ plate accommodates up to 16 samples and is ideal for checking nucleic acid concentrations and purity for Next Gen Sequencing, or protein concentrations.


 
 SmartReader™ UV-Vis Microplate Reader Specifications

Model

Accuris SmartReader™ UV-Vis

Plates Accepted

96-well and 384-well flat bottom

 Display

10-inch color touch screen

Controls

Touch screen and mouse

Light Source

Xenon Flash Lamp

Wavelength range

 200-1000nm

Wavelength Precision

± 2 nm

Wavelength Accuracy

 ± 2 nm

Wavelength selection

Monochromator

Read-out range

0 – 4.0 OD

Detector

Dual silicon photoelectric detectors for measurement and reference

Linearity  @ 450nm

R2 ≥ 0.999, [0.0 – 3.0]

Accuracy  @ 450nm

1.0% + 0.003 Abs (0 – 2.0]
2.0% (2.0 – 2.5 Abs]

Precision@450nm

CV < 0.5% or SD<0.003 (Precision mode); CV < 1.0% (Fast mode)

Stability@450nm

< 0.005A , (0.0 – 2.0]
< 2%   (2.0 – 2.5 Abs)

Measurement speed

96 well plate:  <6 seconds (fast mode); <25 seconds (precision mode)
384 well plate: <74 seconds (only precision mode available for 384)

Plate shaking

Linear; three levels of shaking speed

Incubator

From ambient + 5°C to 45°C

Temperature Uniformity

± 0.5°C @ 37°C

Storage

16G memory, more than 10,000 test records can be stored

Connection Ports

3 USB ports, for PC, printer and USB-flash drive

Power supply

DC24V  6.5A

Dimensions (WxDxH)

300 x 500 x 260mm | 11.8 x 19.7 x 10.25 inches

Weight

15.5kg | 34 Lbs


Ideal for rapid, accurate counts.

The all-in-one eCount combines a multifunction electronic counter with a Sharpie® pen for marking petri dishes to prevent missing or double-counting colonies. Light, ergonomic body is balanced for easy manipulation. Touch controls for multiple counts, sums, counting up or down, and more! Includes fine-point Sharpie® pen and weighted stand. 

Item#:
HS15092A
Your Price:
243.00
Each
This item is discontinued
  • Pressure-sensitive counting
  • Average count facility
  • Bright white energy saving LED lighting
  • With BioCote antimicrobial protection
  • Audible confirmation
  • Choice of light or dark background
  • Connectivity to printer or computer


Touch pressure with felt tip marker on petri dish registers cumulative count on the digital display with confirmation by audible tone (can be turned on or off). The pressure required to register a count can be adjusted to suit each user. Averaging facility calculates average count over multiple plates. Counting results as well as useful statistics including SD can be sent directly to the accessory printer or to a computer via a USB cable supplied.

Sub-stage illumination by low energy bright LED's allows glare-free optimum viewing. A switchable black background is provided to enhance viewing of translucent and difficult to see colonies. Supplied with a Wolffhuegel graticule, segmentation dish and dish centering adapters to facilitate use with 50mm to 90mm dishes. A choice of magnifiers and a printer are available as optional accessories.

 

Technical Specifications

Lighting White LED array
Digital display 3 digit LED
Count 0 to 999
Dimensions (w x d x h), in. 12 x 12 x 5.5"
Mass, lbs 3.3
Electrical supply 120 to 230V, 50 / 60Hz, 70W
Item#:
SC6PLUS
Your Price:
1606.15
Each
Square, W/ Grid, 500/cs

This petri dish is temporarily unavailable. 
Please check out alternative suspension cell culture dishes 
here.

Sterile and free from optical distortion, these dishes are ideal for phage typing, susceptibility testing, plate counts and probe assays. Each 13mm grid is marked numerically in one direction and alphabetically in the other. This dish has four venting ribs into the underside of the lid to prevent condensation build up.


Made of polystyrene.
Dimensions: 90 X 15 mm
Volume: 110 mL
Qty/sleeve: 10
Qty/case: 500

Item#:
PD115
This item is temporarily unavailable.
|◀ 13 - 17 of 17 ▶|
View: