S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Laboratory Labels
What’s important for the efficiency and cost-effectiveness of your lab? Labels. MIDSCI provides you with laboratory labels for all the situations and conditions you can think of.
Perhaps you’re in need of clear laser labels. Then the CryoClear, temperature resistant, laser labels will provide you with the durability you’re looking for. These tough labels remain fully adhered down to an incredible -196°C.
MIDSCI’s very own cryo label sheets, dots, and rolls offer labels that stand up to freezing temperatures and liquid nitrogen as well!
Maybe you’re looking for removable lab labels instead. We have Tough-Tags that are durable yet are easily removed without leaving behind a sticky mess.
Of course, it could be that you want specialty laboratory labels, like wash-off labels. Yep, we have those too!
We’ve also got Tough-Spots, WetGrip labels, and labeling tape.
FrostGrip Cryogenic Storage Labels for Frozen Vials & Tubes
- Adheres to already frozen vials, microtubes, microplates, glass tubes, freezer boxes, plastic bags and more. (as low as -80°C)
- Resistant to smearing without any additional lamination, and will not become brittle or cracked during the deep freeze or vapor liquid nitrogen phase
- Ideal for long term storage.
MIDSCI™ Brand is being discontinued.
MIDSCI™ Cryogenic Labels - Sheets
Labeling frozen vials, microtubes, microplates, glass tubes, freezer boxes, plastic bags, and other containers can be a challenge when stored in temperatures below -20ºC.
Providing a high-quality Cryo label is essential for laboratories, researchers, etc. It will provide fewer errors, better accuracy, and more proficiency and all of this leads to better results at a better budget.
We offer a high-quality adhesive that can stick to already-frozen vials and other objects. The adhesive on this type of label will adhere to a surface in wet and/or cold conditions. The adhesive on the label is specifically designed to stick in temperatures below -80ºC and as low as -196ºC. When storing in deep freeze liquid nitrogen or vapor phase liquid nitrogen our Cryo labels will stay in place. MIDSCI™’s Cryo labels are resistant to smearing without any additional lamination. They also won't become brittle or cracked.
Our cryogenic labels are made of thermoplastic film and coated with a glove-friendly cryogenic adhesive. This special adhesive allows the label to remain strong and sticky so that it can be securely attached to stainless steel, aluminum, paint, powder-coated metal, and iron.
Bake Tags are oven-safe marking labels that withstand conventional oven-sterilization (typically 180°C) or heating to inactivate RNase, DNase and other enzymes. Bake Tags will withstand autoclaving, cryogenic freezer storage conditions and boiling baths without peeling or falling off.
Label Size: 1.50" x 0.75" (38mm x 19mm)
Ideal Use: Oven-sterilization
Color: White
U of M: 250/roll
Ribbon Size: 2.50" (64mm) Wide x 244' (74m) Long
Printer: For use in Zebra printer model TLP 2844
U of M: Roll
Specialty Tough Spots on a Roll are now available for specialty applications, such as identifying hazardous or radioactive samples.
TEMPERATURE RESISTANT- From -196°C to 80°C
SAVE TIME-Preprinted Tough-Spots make labeling and identifying samples quick and easy. Use the numbered tough-spots to identify a series of samples, no handwriting or printing needed.
COLOR CODED-Each color coded Tough-Spot has a distinctly different color to identify similar samples and also includes a white area to clearly write a quick note about it.
SAFETY-Lab safety is always a top priority. Use the Biohazard or Radioactive Tough-Spots to identify tubes or other vessels containing hazardous materials.
Syringe Flag Vaccine
Labels
- Identify the vaccine type at a quick glance with the color-coded flag and large text
- The portion of the label that adheres to the syringe is clear, allowing the user to easily identify what it is in the syringe
- A space is provided for the time the vaccine was administered to be handwritten on the label
- Made in the USA
Material: Mylar with Clear Laminate
Adhesive: Permanent
MIDSCI™ Brand is being discontinued.Products are available for purchase while in stock.Please visit PR1MA™ - CryoTag Sheets for Tubes for our NEW PR1MA™ Label options!
MIDSCI™ Cryogenic Labels - Sheets
Labeling frozen vials, microtubes, microplates, glass tubes, freezer boxes, plastic bags, and other containers can be a challenge when stored in temperatures below -20ºC.
Providing a high-quality Cryo label is essential for laboratories, researchers, etc. It will provide fewer errors, better accuracy, and more proficiency and all of this leads to better results at a better budget.
We offer a high-quality adhesive that can stick to already-frozen vials and other objects. The adhesive on this type of label will adhere to a surface in wet and/or cold conditions. The adhesive on the label is specifically designed to stick in temperatures below -80ºC and as low as -196ºC. When storing in deep freeze liquid nitrogen or vapor phase liquid nitrogen our Cryo labels will stay in place. MIDSCI™’s Cryo labels are resistant to smearing without any additional lamination. They also won't become brittle or cracked.
Our cryogenic labels are made of thermoplastic film and coated with a glove-friendly cryogenic adhesive. This special adhesive allows the label to remain strong and sticky so that it can be securely attached to stainless steel, aluminum, paint, powder-coated metal, and iron.
Our label sheets are specially designed to permanently accept laser printing.
Tough-Tags are chemically inert polyester labels that strongly adhere to all plastics and other materials. They are temperature resistant from 121°C to -40°C. These labels will withstand autoclaving, boiling water baths, freezer temperatures, organic solvents, caustic agents and other challenges without peeling, cracking or falling off. For best adhesion it is recommended that siliconized surfaces be avoided.
Tough-Tags are pre-cut, peel-off labels which accept any marking instrument and are perfectly sized to fit microcentrifuge tubes and other containers in the laboratory. Tubes with Tough-Tags wrapped around them will still slide easily in and out of rotors without binding because the labels are thin and the adhesive does not migrate from behind the label even after boiling and autoclaving.
Label Size: 1.625" x 0.625" (41mm x 16mm)
Ideal Use: General Purpose
Sheet Layout: 4 across - 16 down
Labels/Sheet: 64
Color: White
U of M: 1,600/pack
Label Size: 2.50" x 0.50" (64mm x 13mm)
Ideal Use: 0.5 to 2.0mL tubes
Sheet Layout: 3 across - 20 down
Labels/Sheet: 60
Color: White
U of M: 1,500/pack
How to set up your laser tags
MIDSCI™ Brand is being discontinued.Please visit PR1MA™ CryoTag Sheets for Vials for our NEW PR1MA™ Label options!
MIDSCI™ Cryogenic Labels - Sheets
Labeling frozen vials, microtubes, microplates, glass tubes, freezer boxes, plastic bags, and other containers can be a challenge when stored in temperatures below -20ºC.
Providing a high-quality Cryo label is essential for laboratories, researchers, etc. It will provide fewer errors, better accuracy, and more proficiency and all of this leads to better results at a better budget.
We offer a high-quality adhesive that can stick to already-frozen vials and other objects. The adhesive on this type of label will adhere to a surface in wet and/or cold conditions. The adhesive on the label is specifically designed to stick in temperatures below -80ºC and as low as -196ºC. When storing in deep freeze liquid nitrogen or vapor phase liquid nitrogen our Cryo labels will stay in place. MIDSCI™’s Cryo labels are resistant to smearing without any additional lamination. They also won't become brittle or cracked.
Our cryogenic labels are made of thermoplastic film and coated with a glove-friendly cryogenic adhesive. This special adhesive allows the label to remain strong and sticky so that it can be securely attached to stainless steel, aluminum, paint, powder-coated metal, and iron.
Tough-Tags® are perfect for accurately identifying important samples stored in tubes, microplates or boxes that will be autoclaved or stored in moderate freezer temperatures.
MIDSCI™ Brand is being discontinued.Please visit PR1MA™ - CryoTag Sheets for General Use for our NEW PR1MA™ Label options!
MIDSCI™ Cryogenic Labels - Sheets
Labeling frozen vials, microtubes, microplates, glass tubes, freezer boxes, plastic bags, and other containers can be a challenge when stored in temperatures below -20ºC.
Providing a high-quality Cryo label is essential for laboratories, researchers, etc. It will provide fewer errors, better accuracy, and more proficiency and all of this leads to better results at a better budget.
We offer a high-quality adhesive that can stick to already-frozen vials and other objects. The adhesive on this type of label will adhere to a surface in wet and/or cold conditions. The adhesive on the label is specifically designed to stick in temperatures below -80ºC and as low as -196ºC. When storing in deep freeze liquid nitrogen or vapor phase liquid nitrogen our Cryo labels will stay in place. MIDSCI™’s Cryo labels are resistant to smearing without any additional lamination. They also won't become brittle or cracked.
Our cryogenic labels are made of thermoplastic film and coated with a glove-friendly cryogenic adhesive. This special adhesive allows the label to remain strong and sticky so that it can be securely attached to stainless steel, aluminum, paint, powder-coated metal, and iron.
Web Content Viewer
Actions