Label Size: 1.50" x 0.75" (38mm x 19mm)

Ideal Use: 1.5 to 2.0 mL tubes

Color: White, Blue, Green, Orange, Red, Yellow, or "Rainbow Pack"

U of M: 1,500/pack

How to set up your laser tags

MIDSCI™ Brand is being discontinued.

Please visit PR1MA™ CryoTag Sheets for Vials for our NEW PR1MA™ Label options!   

MIDSCI^™ Cryogenic Labels - Sheets

Labeling frozen vials, microtubes, microplates, glass tubes, freezer boxes, plastic bags, and other containers can be a challenge when stored in temperatures below -20ºC.
Providing a high-quality Cryo label is essential for laboratories, researchers, etc. It will provide fewer errors, better accuracy, and more proficiency and all of this leads to better results at a better budget.  

We offer a high-quality adhesive that can stick to already-frozen vials and other objects. The adhesive on this type of label will adhere to a surface in wet and/or cold conditions. The adhesive on the label is specifically designed to stick in temperatures below -80ºC and as low as -196ºC. When storing in deep freeze liquid nitrogen or vapor phase liquid nitrogen our Cryo labels will stay in place. MIDSCI^™’s Cryo labels are resistant to smearing without any additional lamination. They also won't become brittle or cracked.

Our cryogenic labels are made of thermoplastic film and coated with a glove-friendly cryogenic adhesive. This special adhesive allows the label to remain strong and sticky so that it can be securely attached to stainless steel, aluminum, paint, powder-coated metal, and iron. 

Our patented Cryo-Babies® and Cryo-Tags® withstand both long term cryogenic storage conditions and conventional freezer storage. Cryo labels are chemically inert with a solvent resistant adhesive that will adhere to croygenic vials, microtubes, test tubes, glass vials, beakers and metal racks. Cryo-Babies® and Cryo-Tags® also withstand flash/snap freezing in liquid nitrogen, boiling water baths at 100°C and dry heat up to 150°C.

Our label sheets are specially designed to permanently accept laser printing.

Tough-Tags are chemically inert polyester labels that strongly adhere to all plastics and other materials. They are temperature resistant from 121°C to -40°C. These labels will withstand autoclaving, boiling water baths, freezer temperatures, organic solvents, caustic agents and other challenges without peeling, cracking or falling off. For best adhesion it is recommended that siliconized surfaces be avoided.

Tough-Tags are pre-cut, peel-off labels which accept any marking instrument and are perfectly sized to fit microcentrifuge tubes and other containers in the laboratory. Tubes with Tough-Tags wrapped around them will still slide easily in and out of rotors without binding because the labels are thin and the adhesive does not migrate from behind the label even after boiling and autoclaving.

Label Size: 1.28" x 0.50" (33mm x 13mm)

Ideal Use: 1.5mL tubes

Sheet Layout: 5 across - 17 down

Labels/Sheet: 85

Colors: White, Blue, Green, Orange, Red, Yellow or "Rainbow Pack"

U of M: 2,125/pack

Rainbow Pack includes 5 sheets of each color: Blue, Green, Orange, Red and Yellow

Please give us a call for a sample.

How to set up your laser tags

MIDSCI™ Brand is being discontinued.

Please visit PR1MA™ - CryoTag Sheets for General Use for our NEW PR1MA™ Label options!

MIDSCI^™ Cryogenic Labels - Sheets

Labeling frozen vials, microtubes, microplates, glass tubes, freezer boxes, plastic bags, and other containers can be a challenge when stored in temperatures below -20ºC.
Providing a high-quality Cryo label is essential for laboratories, researchers, etc. It will provide fewer errors, better accuracy, and more proficiency and all of this leads to better results at a better budget.   

We offer a high-quality adhesive that can stick to already-frozen vials and other objects. The adhesive on this type of label will adhere to a surface in wet and/or cold conditions. The adhesive on the label is specifically designed to stick in temperatures below -80ºC and as low as -196ºC. When storing in deep freeze liquid nitrogen or vapor phase liquid nitrogen our Cryo labels will stay in place. MIDSCI^™’s Cryo labels are resistant to smearing without any additional lamination. They also won't become brittle or cracked.

Our cryogenic labels are made of thermoplastic film and coated with a glove-friendly cryogenic adhesive. This special adhesive allows the label to remain strong and sticky so that it can be securely attached to stainless steel, aluminum, paint, powder-coated metal, and iron. 

MIDSCI™ Brand is being discontinued.

Products are available for purchase while in stock.

Please visit Rolls of Labels for our NEW PR1MA™ Label options!   

MIDSCI^™ Cryogenic Labels - Rolls

Labeling frozen vials, microtubes, microplates, glass tubes, freezer boxes, plastic bags, and other containers can be a challenge when stored in temperatures below -20ºC.
Providing a high-quality Cryo label is essential for laboratories, researchers, etc. It will provide fewer errors, better accuracy, and more proficiency and all of this leads to better results at a better budget.  
 

We offer a high-quality adhesive that can stick to already-frozen vials and other objects. The adhesive on this type of label will adhere to a surface in wet and/or cold conditions. The adhesive on the label is specifically designed to stick in temperatures below -80ºC and as low as -196ºC. When storing in deep freeze liquid nitrogen or vapor phase liquid nitrogen our Cryo labels will stay in place. MIDSCI^™’s Cryo labels are resistant to smearing without any additional lamination. They also won't become brittle or cracked.

Our cryogenic labels are made of thermoplastic film and coated with a glove-friendly cryogenic adhesive. This special adhesive allows the label to remain strong and sticky so that it can be securely attached to stainless steel, aluminum, paint, powder-coated metal, and iron. 

Bake-Tags, White

Tough-Tags® are chemically inert labels that strongly adhere to microtubes, test tubes, storage boxes and other microscope slides. They are temperature resistant from 121°C to 40°C and withstand autoclaving, boiling water baths, freezer temperatures, organic solvents and caustic agents. For best adhesion it is recommended that siliconized surfaces be avoided. 

Tough-Tags® are perfect for accurately identifying important samples stored in tubes, microplates or boxes that will be autoclaved or stored in moderate freezer temperatures.

MIDSCI™ Brand is being discontinued.

Products are available for purchase while in stock.

Please visit PR1MA™ - CryoDot Sheets for Tubes for our NEW PR1MA™ Label options!

MIDSCI^™ Cryogenic Labels - Sheets

Labeling frozen vials, microtubes, microplates, glass tubes, freezer boxes, plastic bags, and other containers can be a challenge when stored in temperatures below -20ºC.
Providing a high-quality Cryo label is essential for laboratories, researchers, etc. It will provide fewer errors, better accuracy, and more proficiency and all of this leads to better results at a better budget.  

We offer a high-quality adhesive that can stick to already-frozen vials and other objects. The adhesive on this type of label will adhere to a surface in wet and/or cold conditions. The adhesive on the label is specifically designed to stick in temperatures below -80ºC and as low as -196ºC. When storing in deep freeze liquid nitrogen or vapor phase liquid nitrogen our Cryo labels will stay in place. MIDSCI^™’s Cryo labels are resistant to smearing without any additional lamination. They also won't become brittle or cracked.

Our cryogenic labels are made of thermoplastic film and coated with a glove-friendly cryogenic adhesive. This special adhesive allows the label to remain strong and sticky so that it can be securely attached to stainless steel, aluminum, paint, powder-coated metal, and iron.