S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Laboratory Labels
What’s important for the efficiency and cost-effectiveness of your lab? Labels. MIDSCI provides you with laboratory labels for all the situations and conditions you can think of.
Perhaps you’re in need of clear laser labels. Then the CryoClear, temperature resistant, laser labels will provide you with the durability you’re looking for. These tough labels remain fully adhered down to an incredible -196°C.
MIDSCI’s very own cryo label sheets, dots, and rolls offer labels that stand up to freezing temperatures and liquid nitrogen as well!
Maybe you’re looking for removable lab labels instead. We have Tough-Tags that are durable yet are easily removed without leaving behind a sticky mess.
Of course, it could be that you want specialty laboratory labels, like wash-off labels. Yep, we have those too!
We’ve also got Tough-Spots, WetGrip labels, and labeling tape.
FrostGrip Cryogenic Storage Labels for Frozen Vials & Tubes
- Adheres to already frozen vials, microtubes, microplates, glass tubes, freezer boxes, plastic bags and more. (as low as -80°C)
- Resistant to smearing without any additional lamination, and will not become brittle or cracked during the deep freeze or vapor liquid nitrogen phase
- Ideal for long term storage.
Bake Tags are oven-safe marking labels that withstand conventional oven-sterilization (typically 180°C) or heating to inactivate RNase, DNase and other enzymes. Bake Tags will withstand autoclaving, cryogenic freezer storage conditions and boiling baths without peeling or falling off.
Label Size: 1.50" x 0.75" (38mm x 19mm)
Ideal Use: Oven-sterilization
Color: White
U of M: 250/roll
Ribbon Size: 2.50" (64mm) Wide x 244' (74m) Long
Printer: For use in Zebra printer model TLP 2844
U of M: Roll
Specialty Tough Spots on a Roll are now available for specialty applications, such as identifying hazardous or radioactive samples.
TEMPERATURE RESISTANT- From -196°C to 80°C
SAVE TIME-Preprinted Tough-Spots make labeling and identifying samples quick and easy. Use the numbered tough-spots to identify a series of samples, no handwriting or printing needed.
COLOR CODED-Each color coded Tough-Spot has a distinctly different color to identify similar samples and also includes a white area to clearly write a quick note about it.
SAFETY-Lab safety is always a top priority. Use the Biohazard or Radioactive Tough-Spots to identify tubes or other vessels containing hazardous materials.
Syringe Flag Vaccine
Labels
- Identify the vaccine type at a quick glance with the color-coded flag and large text
- The portion of the label that adheres to the syringe is clear, allowing the user to easily identify what it is in the syringe
- A space is provided for the time the vaccine was administered to be handwritten on the label
- Made in the USA
Material: Mylar with Clear Laminate
Adhesive: Permanent
Our label sheets are specially designed to permanently accept laser printing.
Tough-Tags are chemically inert polyester labels that strongly adhere to all plastics and other materials. They are temperature resistant from 121°C to -40°C. These labels will withstand autoclaving, boiling water baths, freezer temperatures, organic solvents, caustic agents and other challenges without peeling, cracking or falling off. For best adhesion it is recommended that siliconized surfaces be avoided.
Tough-Tags are pre-cut, peel-off labels which accept any marking instrument and are perfectly sized to fit microcentrifuge tubes and other containers in the laboratory. Tubes with Tough-Tags wrapped around them will still slide easily in and out of rotors without binding because the labels are thin and the adhesive does not migrate from behind the label even after boiling and autoclaving.
Label Size: 1.625" x 0.625" (41mm x 16mm)
Ideal Use: General Purpose
Sheet Layout: 4 across - 16 down
Labels/Sheet: 64
Color: White
U of M: 1,600/pack
Label Size: 2.50" x 0.50" (64mm x 13mm)
Ideal Use: 0.5 to 2.0mL tubes
Sheet Layout: 3 across - 20 down
Labels/Sheet: 60
Color: White
U of M: 1,500/pack
How to set up your laser tags
Spot Size: 3/8" diameter (9.5mm diameter)
Ideal Use: 0.5 to 2.0ml tubes
U of M: 1,000/roll
Specialty Tough Spots on a Roll are now available for specialty applications, such as identifying hazardous or radioactive samples.
TEMPERATURE RESISTANT- From -196°C to 80°C
SAVE TIME-Preprinted Tough-Spots make labeling and identifying samples quick and easy. Use the numbered tough-spots to identify a series of samples, no handwriting or printing needed.
COLOR CODED-Each color coded Tough-Spot has a distinctly different color to identify similar samples and also includes a white area to clearly write a quick note about it.
SAFETY-Lab safety is always a top priority. Use the Biohazard or Radioactive Tough-Spots to identify tubes or other vessels containing hazardous materials.
PRINTING FLEXIBILITY - Print as little as one label at a time, eliminating label waste and saving time and money.
BARCODING - Print popular barcode formats for fast and easy sample identification.
VERSATILE - Works with most thermal transfer printers.
HIGH RESOLUTION - Print crisp, clear, professional quality labels.
SUPERIOR - Unique solvent-resistant, acrylic-based adhesive provides excellent cold temperature performance.
TOUGH - Resists degradation from scuffing, chemicals, moisture and wide temperature fluctuations.
SPECIALLY DESIGNED - Coated for use with a resin ribbon that provides the best performance under extreme conditions.
Our patented Cryogenic labels (Cryo-Babies are the small sizes and Cryo-Tags are the larger), are flexible polyolefin labels that withstand conventional and cryogenic storage conditions (vapor and liquid phase nitrogen storage at -196°C). The labels are chemically inert with a solvent resistant acrylic adhesive that will adhere to all plastics, glass and metal. Cryo-Babies and Cryo-Tags will withstand boiling water baths at 100°C and dry heat up to 150°C without cracking, peeling or degrading.
Cryo-Babies and Cryo-Tags resist most detergents and oils, as well as many organic solvents, caustic agents and other challenges without peeling. They will resist water soaking for at least 24 hours at room temperature and water vapor (100% relative humidity) at 35°C for at least 24 hours.
Label Size: 1.28" x 0.50" with 0.375" spot (33mm x 13mm with 9.5mm spot)
Ideal Use: 1.5ml tubes
Sheet Layout: 4 sets across - 17 sets down
Labels/Sheet: 68 sets
Color: White
U of M: 1,360/pack
Watch a video on: How to set up your laser tags
- Makes your color coded tape easily accessible
- Clean cut every time
- Available for 1 and 3 core sizes
- Strong and durable
- Metal and plastic options available
Whether utilizing anesthesia labels in the operating room or using tape to batch wrap culture
plates in the research laboratory, a medical tape dispenser provides easy access to whatever
color coding tape you use with a quick pull and a clean cut.
MIDSCIs multiple tape dispensers provide a well-organized means of storing a rainbow
assortment of color coding tape with no need to worry about different core sizes and widths.
Each of our multiple medical tape dispensers allow the user to easily change out an empty roll
of tape without switching out the entire dispenser, making them easy to use AND efficient!
Web Content Viewer
Actions