S2K Commerce - Products Dropdown
ActionsS2K Commerce - Shopping Cart
ActionsS2K Commerce - Order Entry
ActionsLaboratory Labels
What’s important for the efficiency and cost-effectiveness of your lab? Labels. MIDSCI provides you with laboratory labels for all the situations and conditions you can think of.
Perhaps you’re in need of clear laser labels. Then the CryoClear, temperature resistant, laser labels will provide you with the durability you’re looking for. These tough labels remain fully adhered down to an incredible -196°C.
MIDSCI’s very own cryo label sheets, dots, and rolls offer labels that stand up to freezing temperatures and liquid nitrogen as well!
Maybe you’re looking for removable lab labels instead. We have Tough-Tags that are durable yet are easily removed without leaving behind a sticky mess.
Of course, it could be that you want specialty laboratory labels, like wash-off labels. Yep, we have those too!
We’ve also got Tough-Spots, WetGrip labels, and labeling tape.
Syringe Flag Vaccine
Labels
- Identify the vaccine type at a quick glance with the color-coded flag and large text
- The portion of the label that adheres to the syringe is clear, allowing the user to easily identify what it is in the syringe
- A space is provided for the time the vaccine was administered to be handwritten on the label
- Made in the USA
Material: Mylar with Clear Laminate
Adhesive: Permanent
Tough-Tags are chemically inert polyester labels that strongly adhere to all plastics and other materials. They are temperature resistant from 121°C to â40°C. These labels will withstand autoclaving, boiling water baths, freezer temperatures, organic solvents, caustic agents and other challenges without peeling, cracking or falling off. For best adhesion it is recommended that siliconized surfaces be avoided.
Tough-Tags are pre-cut, peel-off labels which accept any marking instrument and are perfectly sized to fit microcentrifuge tubes and other containers in the laboratory. Tubes with Tough-Tags wrapped around them will still slide easily in and out of rotors without binding because the labels thin and the adhesive does not migrate from behind the label even after boiling and autoclaving.
Label Size: 0.94" x 0.50" (24mm x 13mm)
Ideal Use: 0.5ml tubes
Color: White, Blue, Clear, Green, Orange, Red or Yellow
U of M: 1,000/roll
Please give us a call for a sample.
Labels for Moist, Frosty or Frozen Surfaces
-"Grips" to wet, frost-covered and frozen surfaces
-Temperature resistant to -80°C
-Compatible with centrifuge rotors
-Resistant to chemicals and solvents
-Adheres to plastics, glass, metals and even paperboard boxes
-Available in white laser sheets for use printing in any laser printer (GRLA items), white direct thermal rolls (GRRL items), or white hand writable rolls (GRDT items)
Color Coded Dual Tough-Tags will not come off in rotors, cyclers or racks. They are resistant to extreme temperatures and the matte surface is suitable for pencil, pen or marker.
Label Size: 1.25" x 0.5625" with 0.44" spot (32mm x 14mm with 11mm spot)
Ideal Use: 1.5ml tubes
Colors: Blue, Green, Red, White and Yellow
U of M: 500 sets/roll (a set is one spot and one rectangular label)
Our patented Cryo-Babies® and Cryo-Tags® withstand both long term cryogenic storage conditions and conventional freezer storage. Cryo labels are chemically inert with a solvent resistant adhesive that will adhere to croygenic vials, microtubes, test tubes, glass vials, beakers and metal racks. Cryo-Babies® and Cryo-Tags® also withstand flash/snap freezing in liquid nitrogen, boiling water baths at 100°C and dry heat up to 150°C.
Our label sheets are specially designed to permanently accept laser printing.
Tough-Tags are chemically inert polyester labels that strongly adhere to all plastics and other materials. They are temperature resistant from 121°C to -40°C. These labels will withstand autoclaving, boiling water baths, freezer temperatures, organic solvents, caustic agents and other challenges without peeling, cracking or falling off. For best adhesion it is recommended that siliconized surfaces be avoided.
Tough-Tags are pre-cut, peel-off labels which accept any marking instrument and are perfectly sized to fit microcentrifuge tubes and other containers in the laboratory. Tubes with Tough-Tags wrapped around them will still slide easily in and out of rotors without binding because the labels are thin and the adhesive does not migrate from behind the label even after boiling and autoclaving.
Label Size: 1.625" x 0.625" (41mm x 16mm)
Ideal Use: General Purpose
Sheet Layout: 4 across - 16 down
Labels/Sheet: 64
Color: White
U of M: 1,600/pack
Our label sheets are specially designed to permanently accept laser printing.
Label Size: 0.875" x 0.875" (22mm x 22mm)
Ideal Use: Microscope Slides
Sheet Layout: 8 across - 12 down
Labels/Sheet: 96
Colors: White, Blue, Green, Orange, Red, Yellow or "Rainbow Pack"
U of M: 2,400/pack
Rainbow Pack includes 5 sheets of each color: Blue, Green, Orange, Red and Yellow
Please give us a call for a sample.
How to set up your laser tagsTough-Spots On A Roll, White
Spot Size: 3/16" diameter (4.8mm diameter)
Ideal Use: 0.2ml tubes
Color: White
U of M: 1,500/rollLabel Size: 2.50" x 0.50" (64mm x 13mm)
Ideal Use: 0.5 to 2.0mL tubes
Sheet Layout: 3 across - 20 down
Labels/Sheet: 60
Color: White
U of M: 1,500/pack
How to set up your laser tagsLabel Size: 1.50" x 0.75" (38mm x 19mm)
Ideal Use: 1.5 to 2.0 mL tubes
Color: White, Blue, Green, Orange, Red, Yellow, or "Rainbow Pack"
U of M: 1,500/pack
Our patented Cryo-Babies® and Cryo-Tags® withstand both long term cryogenic storage conditions and conventional freezer storage. Cryo labels are chemically inert with a solvent resistant adhesive that will adhere to croygenic vials, microtubes, test tubes, glass vials, beakers and metal racks. Cryo-Babies® and Cryo-Tags® also withstand flash/snap freezing in liquid nitrogen, boiling water baths at 100°C and dry heat up to 150°C.
Our label sheets are specially designed to permanently accept laser printing.
Tough-Tags are chemically inert polyester labels that strongly adhere to all plastics and other materials. They are temperature resistant from 121°C to -40°C. These labels will withstand autoclaving, boiling water baths, freezer temperatures, organic solvents, caustic agents and other challenges without peeling, cracking or falling off. For best adhesion it is recommended that siliconized surfaces be avoided.
Tough-Tags are pre-cut, peel-off labels which accept any marking instrument and are perfectly sized to fit microcentrifuge tubes and other containers in the laboratory. Tubes with Tough-Tags wrapped around them will still slide easily in and out of rotors without binding because the labels are thin and the adhesive does not migrate from behind the label even after boiling and autoclaving.
Label Size: 1.28" x 0.50" (33mm x 13mm)
Ideal Use: 1.5mL tubes
Sheet Layout: 5 across - 17 down
Labels/Sheet: 85
Colors: White, Blue, Green, Orange, Red, Yellow or "Rainbow Pack"
U of M: 2,125/pack
Rainbow Pack includes 5 sheets of each color: Blue, Green, Orange, Red and Yellow
Please give us a call for a sample.