Tough-Tags® on a Roll

Laboratory labels formatted for handwriting. Tough-Tags® are chemically inert laboratory labels that strongly adhere to microtubes, test tubes, storage boxes and microscope slides. They resist organic solvents and caustic agents. Tough-Tags® are perfect for accurately identifying important samples stored in moderate freezer temperatures.

Color: White, Blue, Clear, Green, Orange, Red or Yellow

Specifications
 

Temp. Range	-40 to 249.8ºF | -40 to 121°C
Ideal Use	0.5 to1.5 mL Tubes
Length	0.94 In. | 24 mm
Width	0.50 In. | 13 mm
U of M	Roll

 

Proudly made in the USA! Click here for more made in America products!
 

Cryo-Babies® on a Roll
Our patented Cryogenic labels (Cryo-Babies® are the small sizes and Cryo-Tags® are the larger), are flexible polyolefin labels that withstand conventional and cryogenic storage conditions (vapor and liquid phase nitrogen storage at -196°C). The labels are chemically inert with a solvent resistant acrylic adhesive that will adhere to all plastics, glass and metal. Cryo-Babies® and Cryo-Tags® will withstand boiling water baths at 100°C and dry heat up to 150°C without cracking, peeling or degrading.

Cryo-Babies® and Cryo-Tags® resist most detergents and oils, as well as many organic solvents, caustic agents and other challenges without peeling. They will resist water soaking for at least 24 hours at room temperature and water vapor (100% relative humidity) at 35°C for at least 24 hours.

Proudly made in the USA! Click here for more made in America products!
 

Laser Tough-Tag® Sheets for 0.5 and 1.5 mL Tubes

Specially designed to permanently accept laser printing.

Laboratory labels formatted for laser printers. Tough-Tags® are chemically inert laboratory labels that strongly adhere to microtubes, test tubes, storage boxes, and microscope slides. They resist organic solvents and caustic agents. Tough-Tags® are perfect for accurately identifying important samples stored in moderate freezer temperatures (121 to -40°C)

Tough-Tags are pre-cut, peel-off labels that accept any marking instrument and are perfectly sized to fit microcentrifuge tubes and other containers in the laboratory. Tubes with Tough-Tags wrapped around them will still slide easily in and out of rotors without binding because the labels are thin and the adhesive does not migrate from behind the label even after boiling and autoclaving.

• Colors: White, Blue, Green, Orange, Red, Yellow, or "Rainbow Pack"
• Rainbow Pack includes 5 sheets of each color: Blue, Green, Orange, Red, and Yellow 

*For best adhesion, it is recommended that siliconized surfaces be avoided.

Specifications
 

Temp. Range	-40 to 249.8ºF | -40 to 121°C
Ideal Use	0.5 to 1.5 mL Tubes
Length	0.94 In. | 23.88 mm
Width	0.50 In. | 13 mm
Layout	7 Across - 17 Down
U of M	Sheet
Qty	2,975/pk

Direct Thermal Cryo-Tags® on a Roll

Direct Thermal Cryo-Tags® are formatted to work with most direct thermal printers. Quickly label your samples with sharp text, clear barcodes or a combination of both! Cryogenic labels are suitable for a variety of applications. Diversified Biotech recommends the Label LIVE app for printing in conjunction with the mydpi Label Printer.

• Temperature resistant from -196 to 70ºC and freezable in liquid nitrogen
• Adheres to most plastics, glass and metals without cracking, peeling or degrading; also resistant to scuffing and smearing
• Tubes labeled with Direct Thermal Cryo-Tags® easily slide in and out of centrifuge rotors without binding
• Print popular barcode formats for fast and easy sample identification
• Limit label waste by printing only the quantity required   
• *Please note that the Dymo LabelWriters are not compatible with Direct Thermal Cryo-Tags®. 

Contact us for a sample!

Proudly made in the USA! Click here for more made in America products!
 

Wash-Off Label Sheets

No Adhesive Residue - Label and adhesive completely dissolve in any water temperature in under 30 seconds. Environmentally Safe - 100% biodegradable and FDA Compliant for indirect food contact. Autoclavable- Labels resist exposure to steam at 121°C. Temperature-resistant - Storage at room temperature to moderate freezer temperatures. Laser Printable - Labels readily accept laser printing for quick labeling of laboratory containers. Ideally Sized - Fits a variety of bottles, flasks, beakers, and other laboratory containers. A build-up of liquid water on the label surface will dissolve the material.

Specifications
 

Item #	WASH-1000	WASH-2000
Label Size	2.625 x 1.00 In. | 66.675 x 25.4 mm	4.00 x 1.00 In. | 101.6 x 25.4 mm
Ideal Use	Various laboratory containers	Various laboratory containers
Sheet Layout	3 across - 10 down	2 across - 10 down
Color	White	White
U of M	750/pk	500/pk

 

Proudly made in the USA! Click here for more made in America products!
 

Laser Sidewall Cryo-Tag® Sheets

Cryogenic labels formatted for laser printers. Our patented Cryo-Babies® and Cryo-Tags® withstand both long term cryogenic storage conditions and conventional freezer storage. Cryogenic labels are chemically inert with a solvent resistant adhesive that will adhere to croygenic vials, microtubes, test tubes, glass vials, beakers and metal racks. Cryo-Babies® and Cryo-Tags® also withstand flash/snap freezing in liquid nitrogen, boiling water baths at 100°C and dry heat up to 150°C.

Specifications
 

Temp. Range	-40 to 302ºF | -40 to 150°C
Ideal Use	Microplates
Length	1.50 In. | 38.01 mm
Width	0.25 In. | 6.35 mm
Layout	8 Across - 12 Down
U of M	4 Across - 39 Down
Qty	1,040/pk

 

Proudly made in the USA! Click here for more made in America products!
 

Laser Tough-Spot® Sheets

Cryogenic spots formatted for laser printers. Our patented Tough-Spots® withstand both long term cryogenic storage conditions and conventional freezer storage. Cryogenic labels are chemically inert with a solvent resistant adhesive that will adhere to croygenic vials, microtubes, test tubes, glass vials, beakers and metal racks. Tough-Spots® also withstand flash/snap freezing in liquid nitrogen, boiling water baths at 100°C and dry heat up to 150°C.

Colors: White, Blue, Green, Orange, Red, Yellow, or Rainbow Pack
Rainbow Pack includes 5 sheets of each color: Blue, Green, Orange, Red, and Yellow

Proudly made in the USA! Click here for more made in America products!

Direct Thermal WetGrip™ Label Sheets and Rolls

Labels for Frosty or Frozen Surfaces "Grips" to wet, frost-covered and frozen surfaces. Compatible with centrifuge rotors Resistant to chemicals and solvents. Adheres to plastics, glass, metals and even paperboard boxes. Available in white laser sheets, white direct thermal rolls, or white hand writable rolls. Direct Thermal WetGrip™ Labels are formatted to work with most direct thermal printers. Quickly label your samples with sharp text, clear barcodes or a combination of both! Diversified Biotech recommends the Label LIVE app for printing in conjunction with the mydpi 300v1 Label Printer.

*Please note that the Dymo LabelWriters are not compatible with Direct Thermal WetGrip™.

Specifications
 

Temp. Range	-112 to 158ºF | -80°C to 70°C
Ideal Use	Cryogenic Vials
Length	Varies
Width	Varies
U of M	Roll

 

Proudly made in the USA! Click here for more made in America products!
 

Color Coded Tough-Tags® on a Roll

Tough-Tags® are chemically inert laboratory labels that strongly adhere to microtubes, test tubes, storage boxes, and microscope slides. They resist organic solvents and caustic agents. Tough-Tags® are perfect for accurately identifying important samples stored in moderate freezer temperatures. Color Coded Tough-Tags will not come off in rotors, cyclers or racks. They are resistant to extreme temperatures, and the matte surface is suitable for pencil, pen or marker.

Colors: Blue, Green, Red, White, and Yellow

Specifications
 

Temp. Range	-40 to 249.8ºF | -40 to 121°C
Ideal Use	1.5 to 2.0 mL Tubes/Vials
Length	1.50 In. | 38.1 mm
Width	0.50 In. | 12.70 mm
U of M	Roll

 
 Proudly made in the USA! Click here for more made in America products!
 

Tough-Spots® on a Roll for 0.2 to 0.5 mL Tubes

Circular cryogenic labels formatted for handwriting. Tough-Spots® on a roll are easy to write PVC cryogenic labels that accept writing from most lab markers. Tough-Spots® come in a variety of colors and sizes to ensure the right label for the right job!

Spot Size: 3/16 In. diameter (9.5 mm)

Specifications
 

Temp. Range	-320.8 to 176ºF | -196°C to 80°C
Ideal Use	0.2 to 0.5 mL Tubes
Length	0.1875 In. | 4.76 mm
Width	0.1875 In. | 4.76 mm
Color	White
U of M	Roll
Qty	1,500/pk

Laser Tough-Tag® Sheets for 15 and 50 mL Tubes

Laboratory labels formatted for laser printers. Tough-Tags® are chemically inert laboratory labels that strongly adhere to microtubes, test tubes, storage boxes and microscope slides. They resist organic solvents and caustic agents. Tough-Tags® are perfect for accurately identifying important samples stored in moderate freezer temperatures.

• Color: White, Blue, Clear, Green, Orange, Red or Yellow

Specifications
 

Temp. Range	-40 to 249.8ºF | -40 to 121°C
Ideal Use	15 to 15 mL Tubes
Length	1.50 In. | 38 mm
Width	0.75 In. | 19 mm
Layout	5 Across - 12 Down

 

Proudly made in the USA! Click here for more made in America products!
 

Laser Cryo-Tag® and Cryo-Babies® Sheets

Our patented Cryo-Babies® and Cryo-Tags® withstand both long-term cryogenic storage conditions and conventional freezer storage. Cryo labels are chemically inert with a solvent-resistant adhesive that will adhere to cryogenic vials, microtubes, test tubes, glass vials, beakers, and metal racks. Cryo-Babies® and Cryo-Tags® also withstand flash/snap freezing in liquid nitrogen, boiling water baths at 100°C, and dry heat up to 150°C.
 

Proudly made in the USA! Click here for more made in America products!