S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Cryogenic Storage Systems and Supplies
Are you looking for reliable cryogenic storage systems and supplies? We’ve got that and more.
MIDSCI has a wide selection of cryogenic storage products; including entire systems, refrigerators, and tanks.
The K Series Cryostorage Systems we carry offers reliable liquid nitrogen storage from -100°C to -196°C. These systems have a unique Temperature Gradient Suppression System that greatly improves vapor phase storage temperature and recovery.
Other than entire cryogenic storage systems, we also offer cryogenic refrigerators, such as the LS3000. This rugged product can lower your operating cost per vial!
And for confined workspaces, consider the XTL3 cryogenic storage tank.
Adapt-a-Rack
Capable of holding different size tubes in each available slot as the well literally adapts to your tube size to hold firmly in an upright position. The design enables you to hold 12mm to 30 mm (15 to 50mL tubes) simultaneously and still allow full viewing of the tube label.
- Racks can be linked together for additional holding capacity
- Open sides allow for label viewing
- Flat base to hold tubes upright
- Linked racks should be supported when carrying
- Single rack measures 181x56x76mm, two racks per pack
- Autoclavable
4 Way Flipper® Rack with Tray
Small footprint is perfect for the benchtop or under the hood!
- Multi-tube compatibility
- Four 4-Way racks in a convenient tray
- Each Flipper can be independently oriented
- 4-way racks can be used in the tray or independently
- Fluorescent Colors: Green, Yellow, Orange, Pink
- Standard Colors: Blue, Green, Red, Yellow
- Dimensions: 243 × 102 × 41 mm
Each rack can be rotated to support a variety of tube sizes including:
- Twelve 0.5 mL Tubes
- Nine 1.5 - 2.0 mL Tubes
- Six 15 mL Tubes
- Two 50 mL Tubes
Microcentrifuge Tube Racks
Maximize your lab's efficiency with Microcentrifuge Tube Racks! These racks include frosted writing areas for easy labeling/identification and come with a matching lid to protect your samples. Packaged in units of 5 racks per package, with 4 packages per case.
- Three models accommodate common tube sizes (0.5, 1.5 / 2.0, and 5.0 mL)
- Ideal for screw cap microtubes and microcentrifuge tubes
- Small footprint saves bench and freezer space
- Side notches facilitate easy lid removal
- Suitable for temperatures as low as -90ºC as well as autoclaving
- Racks come with lid
Specifications
| Item # | 5527-00 | 5520-00 | 5530-00 |
| Dimensions (D x W x H) | 143.8 x 75.2 x 53.0 mm 5.66 x 2.96 x 2.09 in. | 143.8 x 75.2 x 53.0 mm 5.66 x 2.96 x 2.09 in. | 139.7 x 71.1 x 61.8 mm 5.5 x 2.8 x 2.43 in. |
| Formation | 21 wells, 7 x 3 | 50 wells, 10 x 5 | 50 Wells, 10 x 5 |
| Tube Size | Holds 5 mL Tubes | Holds 1.5 / 2.0 mL Tubes | Holds 0.5 mL Tubes |
24-Place & 48-Place Microtube Storage Racks
- Hold 1.5 mL, 1.7 mL, and 2.0 mL microtubes
- Freezable (-190°C) and autoclavable (122°C)
- Racks float in water baths
Labcon 24-Place and 48-Place micro centrifuge tube and cryo-vial storage system. For 1.5 mL and 2.0 mL tubes. These racks fit into Labcon pipette tip boxes and are made of recycled plastic. Fully autoclavable (122°C) and freezable (-190°C). Stackable racks float in your water bath and can incorporate dry ice for use with frozen samples on the bench.
MIDSCI # |
VWR # |
3035-230-000-9 |
24270-230 |
3035-500-000-9 |
24270-200 |
3036-220-000-9 |
24270-204 |
These chemical-resistant, epoxy-coated steel wire racks have a slotted bottom for secure handling. Ideal for conical centrifuge tubes but can be used to hold other types and sizes of tubes. The 15 mL rack has 20 mm holes; 50 mL rack has 30 mm square holes. Autoclavable.
Storage Box with Telescoping Lid
- Tubes of varying lengths are accommodated by the telescoping lids of these boxes.
- Made of polypropylene, they can be used for freezer storage and autoclaved.
- Lids are alphanumerically labeled.
- Boxes hold 0.5 mL, 1.5/2.0 mL and 5 mL tubes as well as cryovials and chromatography vials.
- Freezer storage racks and numeric ID grids are available for the 1.5/2.0 mL boxes.
Cube Rack, Assorted Colors
Interlocking on all sides!
Our user friendly cube rack is a must for any laboratory. It accommodates (4) 50mL tubes, (10) 15mL conical tubes, (12) 12 x 75 or 12 x 100 tubes, or (16) 1.5 to 2.0mL microcentrifuge tubes. Polypropylene racks slide together, allowing you to work with different tubes on as many connected racks as desired. Autoclavable. Available in natural, green, pink, yellow, or assorted colors (one each of blue, green, yellow, orange, and pink). Rack measures 4 1/4 x 4 1/4 x 4 1/2". Packs of 5
32-Place Junior Flipper® Rack
Perfect for sequencing!
Our Flipper Racks are crafted to be the perfect partner for PCR preparation, offering reliable performance and easy handling. The dual-sided feature and temperature resilience ensure your life’s work is protected and your lab runs efficiently. Convenient modeling indexes and varying colors make it easy to keep your space organized.
Two-sided rack accommodates 2 tube sizes:
- Side A: 32 wells for 1.5 mL or 2.0 mL tubes with 8 smaller positions for 0.5 mL tubes.
- Side B: 32 wells for 0.5 mL tubes with 8 larger positions for 1.5 or 2.0 mL tubes.
Colors: Assorted Fluorescent includes Blue, Green, Orange, Pink, Yellow
32 Wells, 8 x 4
- Snug-fitting lid prevents accidental separation if dropped
- Use in mechanical freezers or liquid nitrogen tanks to –196°C
- Constructed of sturdy cardboard with moisture-repellent coating
- Designed with small holes on the bottom to allow for drainage
Tubes Held | 64 |
Tube Size | 0.2 mL PCR |
Max Tube Dimensions | 14.6 mm |
Lowest Set Temperature (° C) | -196 |
Color | White |
Height (in) | 1 |
Length (in) | 3 |
Width (in) | 3 |
Height (cm) | 2.54 |
Length (cm) | 7.6 |
Width (cm) | 7.6 |
Description | Cardboard Freezer Box, 3" x 3" x 1"; with 64-Place Divider for PCR Tubes |
Cardboard Freezer Box, 5-1/4" x 5-1/4" x 1"; with 196-Place Divider Specifications:
Tubes Held | 196 |
Tube Size | 0.2 mL PCR |
Max Tube Dimensions | 8 mm |
Lowest Set Temperature (° C) | -196 |
Color | White |
Height (in) | 1 |
Length (in) | 5 1/4 |
Width (in) | 5 1/4 |
Height (cm) | 2.54 |
Length (cm) | 13.3 |
Width (cm) | 13.3 |
Description | Cardboard Freezer Box, |
CoolSafe Specialty chambers are ideal for ice pans, ice buckets and cold or hot plates. These do not fit the CoolSafe Systems. Freeze these chambers overnight for added cooling convenience.
Multiple Uses - Ideal for use on hot or cold plates or for temperature sensitive liquid transfers.
Ideally Sized - A variety of options are available to accommodate PCR tubes and trays, 1.5, 15 and 50 ml conical tubes.
PR-40
- Four angled compartments hold pipettes securely
- Notched shelves allow easy access to shorter pipettes
- Durable ¼-inch acrylic construction
- Flat top for additional storage of pipettors, tips, etc.
- Non-skid rubber feet
- Overall Dimension: 11.75"D x 3.75"W x 16"H
- Compartment Dimensions: 11.5"D x 3.25"W x 3"H
PR-42
- Same features as the PR-40 but twice as big
- Overall Dimension: 11.75"D x 7"W x 16"H
- Compartment Dimensions: 11.5"D x 6.5"W x 3"H
64-Place Flipper® Rack
A great replacement for cardboard or metal freezer racks!
Our Flipper Racks are crafted to be the perfect partner for PCR preparation, offering reliable performance and easy handling. The dual-sided feature and temperature resilience ensure your life’s work is protected and your lab runs efficiently. Convenient modeling indexes and varying colors make it easy to keep your space organized.
Two-sided rack accommodates 2 tube sizes:
- Side A: 64 wells for 1.5 mL or 2.0 mL tubes.
- Side B: 64 wells for 0.5 mL tubes.
Colors: Assorted Fluorescent includes Blue, Green, Orange, Pink, Yellow
*Lid not included for items: F64-RO, F64C-RO
Specifications
| Dimensions w/ Lid (D x W x H) | 132 x 130 x 45 mm 5.17 x 5.12 x 1.77 in. |
| Dimensions w/o Lid (D x W x H) | 132 x 130 x 31 mm 5.17 x 5.12 x 1.22 in. |
| Side A | Holds 1.5 - 0.2 mL Tubes |
| Side B | Holds 0.5 mL Tubes |
| Formation | 64 Wells, 8 x 8 |
Web Content Viewer
Actions