S2K Commerce - Products Dropdown
ActionsS2K Commerce - Shopping Cart
ActionsS2K Commerce - Order Entry
ActionsTiterSeal™ Sealing Film
- Eliminates the “edge effect” which can occur with plate lids (e.g. greater evaporation in the outside plate wells)
- Provides a secure seal and is easy to remove
- Rigid polyester film features good clarity and easy handling
- Can be used as a temporary economical seal while awaiting further processing
- Features two end-tabs with perforations
- General laboratory use
- Short-term storage
- Incubation
- ELISA
- -40°C to +120°C
SealPlate® ColorTab™ Sealing Film for Sample Identification and Plate Labeling
An inscribed color-coded end-tab can be removed and pasted into a laboratory notebook while the other remains on the plate for identification. The film sheet can be removed from the plate without disturbing the identification label due to the finely perforated end-tabs. Choose from 5 different individual colors or the assortment pack.
- Provides a secure seal and is easy to remove
- Rigid polyester film features good clarity and easy handling
- Features two end-tabs with perforations
Applications
- General laboratory use
- Short-term storage
- Incubation
- ELISA
Temperature Range
- -40°C to +120°C
eXTReme™ FoilSeal™
eXTReme FoilSeal is an aluminum foil seal that offers excellent chemical resistance and superior performance in ultra-low temperatures.
Application: Long-term storage, light sensitive assays and robotics
- Certified DNase- & RNase- free
- Recommended for -80°C long-term storage
- Excellent chemical resistance (e.g. DMSO)
- Specially formulated adhesive provides an excellent seal to minimize evaporation and well-to-well contamination
- 1.9mil thick aluminum foil removes easily without tearing and allows for visual verification of the seal’s security around each well
- Pierceable with a pipet tip for direct sample recovery
- Not recommended for PCR
- Remove diagonally from a corner to prevent tearing
- Selection of the proper film size will minimize evaporation
- More complete coverage of the plate will reduce evaporation in the outer wells
EZcap™ PCR FilmStrips
- Certified DNase- & RNase- free
- Features an extra strong, thick adhesive to minimize evaporation
- Each sheet contains 8 strips on a continuous liner
- A non-locking workstation is recommended for sample prep (e.g. 96-well round-boom plate)
- Removal of the end-tabs at the perforations is recommended before thermal cycling
- A final sealing step is highly recommended in the thermal cycler because 8-tube strips flex during handling
AlumaSeal® Easy-to-pierce Aluminum Foil Seal for Direct Sample Recovery
AlumaSeal® 384 provides a secure seal for 384-well plates to minimize evaporation, reduce cross-contamination and prevent spillage.
AlumaSeal® 96 provides a secure seal for 96-well raised-rim and non-skirted PCR plates to minimize evaporation, reduce cross-contamination and prevent spillage.
- Certified DNase- & RNase- free
- Ideal for use with 384-well and deep-well plates (or select AlumaSeal® 96™ for smaller cut for raised-rim and non-skirted PCR plates.)
- Features one end-tab with no perforation
- Pierceable with a pipet tip or robotic probe for direct sample recovery
- Large cut allows for easier positioning of the foil to the plate via edge of plate alignment vs. centering
- Available in roll format for automation: AlumaSeal® Roll-Seal
- PCR
- Long-term storage
- Light sensitive assays
- Robotics
- -80°C to +120°C
- End-tab removal before thermal cycling is highly recommended
- Remove diagonally from a corner to prevent tearing
- Selection of the proper film size will minimize evaporation
- The film should not overhang or ride up the wall of a raised-rim plate
- More complete coverage of skirted flat-top plates will reduce evaporation in the outer wells
Designed to Facilitate Air and CO2 Exchange. AeraSeal™ features a hydrophobic, gas permeable membrane with a medical grade, non-cytotoxic adhesive. The porous membrane consists of layers of heat welded rayon fibers.
- Pore size from 10 µm to 50 µm
- Moisture vapor transmission rate = 4,200 g/m²/24 hr
- Easy-to-pierce with serological pipets and pipet tips for direct sample recovery
- Available in roll format for automation: AeraSeal™ Roll-Seal
- Cell culture
- Tissue culture
- Bacterial cultures
- -20°C to +80°C
SealPlate® SealMate™ Rolls
The SealMate SealPlate Starter Kit features a re-usable dispenser and two rolls of perforated film.
The dispenser facilitates the quick and easy dispensing of film from a roll allowing microplates to be sealed three times faster than using sheeted films. Cost-effective replacement rolls are sold separately. Ideal for use under the hood; the SealMate dispenser minimizes film contamination.
- Environmentally friendly; no paper liner to remove and discard; utilizes approximately 72% less material than SealPlate sheeted film
- Each sheet is separated by an adhesive-free, perforated, color-coded green band
- The smooth lower surface of the dispenser can be used to seal the film to the plate
- Dispenser protects unused seals from contamination
- Lower support prop prevents dispensing bill from contacting surfaces to prevent contamination
- Replacement rolls can be easily installed by releasing the locking clasps on the dispenser
- General laboratory use
- Short-term storage
- Incubation
- ELISA
- -40°C to +120°C
General Purpose Sealing Film For a More Secure Seal to Minimize Evaporation
General Purpose polypropylene films offer superior barrier properties to minimize evaporation and prevent well-to-well contamination. Ideal for use with polypropylene plates.- Certified DNase- & RNase- free
- Features good chemical resistance
- Provides a very secure seal to minimize evaporation, but is slightly harder to remove than SealPlate films
- Less rigid polypropylene film reduces aerosols upon removal
- Specially formulated adhesive minimizes plate residue
- Can be used as a temporary seal while awaiting further processing
- General laboratory use
- Short-term storage
- Incubation
- ELISA
- -40°C to +120°C
SealPlate® Sealing Film - The Industry Standard for Sample Protection
SealPlate® minimizes evaporation, prevents well-to-well contamination and spillage. Eliminates the “edge effect” which can occur with plate lids (e.g. greater evaporation in the outside plate wells).
- Provides a secure seal and is easy to remove
- Rigid polyester film features good clarity and easy handling
- Can be used as a temporary economical seal while awaiting further processing
- Features two end-tabs with perforations
Applications
- General laboratory use
- Short-term storage
- Incubation
- ELISA
- -40°C to +120°C
Temperature Range: -20°C to +120°C
Product Info
- Features chamfered corners to eliminate plate overhang for robotics applications and tight storage conditions.
- Certified DNase- & RNase- free
- Next-generation adhesive formula provides better than-ever sample protection with improved evaporation rates
- Standard cut is ideal for use with raised-rim and non-skirted PCR plates
- Large cut is designed for greater plate coverage and easier positioning of the film to the plate
- Large cut is recommended for use with flat-top, semi skirted and full-skirted PCR plates as well as deep well plates
- NOT recommended for qPCR
AlumaSeal® II™ Easy-to-pierce Aluminum Foil Seal
- Certified DNase- & RNase- free
- Excellent chemical resistance (e.g. DMSO)
- Easily pierceable with single or multichannel pipettors and robotic probes
- 1.4mil conformable aluminum foil allows visual verification of the seal’s security around each well
- PCR
- Long-term storage
- Light sensitive assays
- Robotics
- -80°C to +120°C
- End-tab removal before thermal cycling is highly recommended
- Remove diagonally from a corner to prevent tearing
FoilSeal™
- Certified DNase- & RNase- free
- Pierceable with a pipet tip or robotic probe for direct sample recovery
- 2.0mil aluminum foil removes easily without shredding or tearing
- The conformable nature of foil allows for the visual verification of the seal’s security around each well
- Not recommended for long-term storage
- Remove diagonally from a corner to prevent tearing