Home  >  PCR, Protein, RNA, DNA
|◀ ◀ 97 - 108 of 559 ▶ ▶|
View:

FoilSeal™


Extra thick aluminum foil minimizes shredding upon removal
 
FoilSeal features a specially formulated adhesive that provides an excellent seal to minimize evaporation, reduce cross-contamination and prevent spillage.

Application: PCR, light sensitive assays and robotics
Temperature Range: -20°C to +120°C

Universal fit for all plate types (e.g. flat-top, raised-rim and non-skirted); the smaller dimensions and rounded corners result in no plate overhang for robotics applications.

  • Certified DNase- & RNase- free
  • Pierceable with a pipet tip or robotic probe for direct sample recovery
  • 2.0mil aluminum foil removes easily without shredding or tearing
  • The conformable nature of foil allows for the visual verification of the seal’s security around each well
  • Not recommended for long-term storage
 
Helpful Tips:

  • Remove diagonally from a corner to prevent tearing
Item#:
ASFOILSEALTM
 
FoilSeal Features
Specs FoilSeal
Optically Clear, Pressure Activated, Non-tacky Silicone

ThermalSeal® RTS™ Optically Clear, Pressure Activated, Non-tacky Silicone Adhesive

 
The silicone adhesive is non-tacky until pressure is applied to the sealing surface which then creates a secure bond around the wells and perimeter of the plate. Also ideal for dry samples (e.g. soil, seeds, insects, etc.) because the non-activated adhesive above the wells remains non-tacky. A roller or sealing paddle is highly recommended for use with this product to ensure consistent and adequate pressure is applied during the sealing process. 

  • Provides an extremely strong seal to minimize evaporation
  • Certified DNase- & RNase- free
  • Chemically resistant to DMSO, acetonitrile, and methanol
  • Ideal for use with flat-top, raised-rim and non-skirted PCR plates
  • High optical clarity and low auto-fluorescence
  • Available in roll format for automation: ThermalSeal® RTS™ Roll-Seal
  • A complimentary sealing paddle is included in each box

Applications

  • qPCR
  • Long-term storage
  • Protein crystallography
  • HPLC
Temperature Range
  • -80°C to +105°C

Helpful Tips

  • Sufficient pressure must be applied to activate the silicone adhesive
  • Multiple swipes of the sealing paddle in both directions is highly recommended
  • A 10 minute or greater wait period before thermal cycling increases the film-to-plate bond

Item#:
ASFILMPROTCRYST
 
ThermalSeal Features
Specs ThermalSeal
Sealing film selection guide by attributes
Sealing film selection guide by application

1.4 mL Aluminum Adhesive Sealing Film

Soft and non-permeable, the 1.4 mL aluminum sealing foil offers optimum sealing for all PCR plates. Using a medical-grade acrylic adhesive, our foil seals are easily pierced with single or multi-channel pipettors and robotic probes. These soft foil seals, resist rolling back when removing the backing paper and seal tightly to both PCR and Deep Well Blocks.

Ideally suited for PCR and Cold Storage down to -80 °C. Exceptional adhesive properties and foil material durability yield virtually no sample evaporation or drying.

Certified free of RNase, DNase, Pyrogen, and nucleic-acid contamination. 

Specifications 

Length133.35 mm
Length (w/ end tabs removed)120.65 mm
Width80.01 mm
Overall Thickness1.4 mil
Adhesive Thickness1.1 mil
MaterialAluminum
AdhesiveMedical Grade Acrylic
Max. Temperature120 °C
Min. Temperature-80 °C
Primary UsagesStorage or Sample Cover
Item#:
ASADHESEALFLALM14
Optically Transparent, Highly Conformable Adhesive

ThermalSeal® RT2™ Optically Transparent, Highly Conformable Adhesive, Polyester Sealing Film

Designed for use with standard 96-well plates where rows must be selectively protected or accessed. Available in a smaller cut for raised-rim and non-skirted PCR plates: ThermalSeal® RT2RR 

  • Certified DNase- & RNase- free
  • Ultra-high optical clarity
  • Minimizes evaporation and cross-contamination
  • Ideal for use with flat-top and hard-shell dual component (e.g. polycarbonate / polypropylene) PCR plates
  • Not recommended for removal after thermal cycling

Application

  • qPCR
Temperature Range
  • -40°C to +120°C

Helpful Tips

  • Selection of the proper film size will minimize evaporation
  • The film should not overhang or ride up the wall of a raised-rim plate
  • More complete coverage of skirted flat-top plates will reduce evaporation in the outer wells
  • End-tab removal before thermal cycling is highly recommended

Item#:
ASQPCRFILM
 
ThermalSeal RT2 Features
Specs ThermalSeal RT2
Sealing film selection guide by application
Sealing film selection guide by attributes

Zone-Free™


Zone-Free is a multilayer film consisting of a top pierceable clear polyethylene film and a white polypropylene sublayer with 96 circular areas void of adhesive.

Application: Short-term storage and robotics
Temperature Range: -40°C to +90°C

The white sublayer aids in the alignment of the film to the plate; alignment of opposing corner wells ensures that all 96 wells will be properly aligned. The adhesive-free zones are 9mm on center to facilitate multi-channel pipetting without adhesive fouling of pipet tips or robotic probes.

  • Pierceable
  • Offers excellent chemical resistance
  • Samples have minimal contact with adhesive due to the adhesive-free zones
Item#:
ASZONEFREFIL
 
Sealing film selection guide by application
Sealing film selection guide by attributes
Zone-FreeFilm Features
Specs Zone-FreeFilm
Thick Adhesive, Leaves No Residue Behind


Click to shop new and improved eXTReme™ 2 Seal Extra Strong Sealing Film


eXTReme™ Seal Sealing Film with Extra Strong Adhesive Minimizing Evaporation Without Residue

eXTReme™ Seal features an extra-strong thick adhesive to minimize evaporation, yet removes easily without leaving residue on the plate.

Features chamfered corners to eliminate plate overhang for robotics applications and tight storage conditions.

  • Certified DNase- & RNase- free
  • Ideal for use with raised-rim and non-skirted PCR plates
  • Available in a larger cut for flat-top semi-skirted and full-skirted PCR plates: eXTReme™ Seal, Large

Application

  • PCR
  • Robotics
Temperature Range
  • -20°C to +120°C

Helpful Tips

  • Selection of the proper film size will minimize evaporation
  • The film should not overhang or ride up the wall of a raised-rim plate
  • More complete coverage of skirted flat-top plates will reduce evaporation in the outer wells
  • End-tab removal before thermal cycling is highly recommended


Item#:
ASPCRSEALFILM
 
eXTReme Seal Features
Specs eXTReme Seal
Sealing Film Selection Guide by Application
Sealing Film Selection Guide by Attributes
For Sealing One Row of a 98-Well Plate

1 x 8 FilmStrips™ for Sealing Only One 8-well Row of a 96-well Plate

Designed for use with either 1×8 strip-well ELISA plates or standard 96-well plates where rows must be selectively protected or accessed. Ideal for COVID-19 testing to seal a row of 8 wells after swabs are deposited into a deep-well plate.
  • Certified DNase- & RNase- free
  • A pliable polypropylene film minimizes aerosols upon removal
  • Each sheet contains 8 strips on a continuous liner for ease of use
  • Apply individually or two-at-a-time
  • Use as a secondary film to seal previously pierced wells or to prevent accidental pipetting
Applications
  • General laboratory use
  • Incubation
  • ELISA
Temperature Range
  • -40°C to +120°C
Item#:
AS1X8FILMSTRIPS


Adhesive Sealing Film, Polyolefin

 

These 2.8 mL, optically clear polyester films are ideally suited for Real Time PCR (qPCR). They feature an inert, ultra-clear, and strong encapsulated silicone adhesive that provides extraordinary performance in real-time PCR applications.

 

Encapsulated silicone greatly reduces the risk of sample contamination due to exposure to adhesive. Once the film is pressed onto the plate, the raised portion of the well penetrates the encapsulation and a tight seal is formed on just that surface (not over the sample). This silicone seal adheres aggressively and diminishes the possibility of "Edge Effect".

 

The plasticized backing of this film is scored on both ends to allow for two handed (precise) placement on the plate. Both film and adhesive maintain incredible clarity and are the choice for highly demanding manual and automated processes.

 

Certified free of RNase, DNase, Pyrogen, and nucleic-acid contamination.

Specifications

Length141.27 mm
Length (w/ end tabs removed)117.5 mm
Width77.8 mm
Overall Thickness2.8 mL
Adhesive Thickness2.0 mL
MaterialPolyester
AdhesiveEncapsulated Silicone
Max. Temperature120 °C
Min. Temperature-40 °C
Primary UsagesReal Time PCR (qPCR), PCR

 

Item#:
ASADHESIVEPOLFIN28
Black Vinyl Sealing Film for Black Microplates

AbsorbMax™ Black Vinyl Sealing Film for Black Microplates

AbsorbMax™ is a black vinyl film that can be applied to either the top or bottom of the plate.

  • Minimizes background fluorescence and cross talk between plate wells
  • Ideal as a back seal for black plates with clear well bottoms for top reading measurements
  • Absorbs stray light, reducing the background caused by light scatter
  • Protects light sensitive samples from degradation
  • Features a single split liner for easy application

Applications

  • Fluorescence assays
  • Light sensitive sample protection

Temperature Range

  • -40°C to +80°C
Item#:
ASABSORBMAX
 
AbsorbMax Features
Specs AbsorbMax
Sealing film selection guide by application
Sealing film selection guide by attributes
For Use with White Microplates

BrightMax™ White, Light-reflecting, Vinyl Sealing Film

Designed for use with white microplates.

  • The light reflective properties on clear-bottom plates maximize the sensitivity of bioluminescence and chemiluminescence assays in bottom-reading luminometers
  • Maximizes intensity and signal-to-noise ratios in luminescence assays
  • May be used as a backing matrix for microscopy of punch-out samples for filter plates (e.g. ELISPOT assays)
  • Features a single split liner for easy application

Applications

  • Luminescence
  • Fluorescence
  • Microscopy
Temperature Range
  • -40°C to +80°C


Item#:
ASFLOULUMIN
 
BrightMax Features
Specs BrightMax
Sealing film selection guide by application
Sealing film selection guide by attributes

Accuris Fast Extraction PCR Kit

 

The Accuris Fast Extraction PCR Kit features an exclusive single-tube solution that extracts genomic DNA in just 8 minutes. This is swiftly followed by PCR amplification utilizing our High Fidelity Hot Start Red Dye Master Mix, designed for superior endpoint PCR performance. High Fidelity Hot Start Red Dye Master Mix is a 2X formula that incorporates a non-reactive red dye, enabling direct gel loading.

 

This kit offers versatility to suit different workflows: the PCR-prepared genomic DNA can be directly used in endpoint PCR or can be applied in real-time PCR using either SYBR Green or TaqMan Probe chemistries.

  • Offers exceptional versatility and can be used to extract and amplify DNA from a wide range of sample types
  • Compatible with animal tissue, plant, saliva, & bacterial samples
  • Extraction & Amplification in less than 60 minutes
  • Includes High Fidelity Hot Start Red Dye Master Mix to prevent the risk of nonspecific amplification & to visualize bands easily
  • Process extracted sample via PCR with included mastermix
  • Alternatively, amplify via qPCR (qPCR mastermix not included)

 

Each 100 reaction kit includes:

1 tube of High Fidelity Hot Start Red Dye Master Mix (1.25 mL)

1 tube of Fast Extraction Lysis Solution (1.25 mL)

 

Applications: Extraction & Amplification of Tissue, Plant, Saliva, & Bacteria   

Item#:
ASFASTEXTRACT
 
Fast Extraction PCR Kit Info Sheet
Fast Extraction PCR Kit Sales Sheet

Azure HRP Stripping Buffer

 

Works by removing the primary and secondary antibodies from the membrane

Stripping buffer for stripping and re-probing chemiluminescent Western blots.

 

  • Provided as a 1x ready-to-use solution
  • Size: 500mL

 

Item#:
ASAZHRPSTRIBUFF
 
HRP Stripping Buffer Safety Data Sheet
|◀ ◀ 97 - 108 of 559 ▶ ▶|
View: