S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
For Fast and Efficient Microplate Sealing
SealPlate® SealMate™ Rolls
The SealMate SealPlate Starter Kit features a re-usable dispenser and two rolls of perforated film.
The dispenser facilitates the quick and easy dispensing of film from a roll allowing microplates to be sealed three times faster than using sheeted films. Cost-effective replacement rolls are sold separately. Ideal for use under the hood; the SealMate dispenser minimizes film contamination.
- Environmentally friendly; no paper liner to remove and discard; utilizes approximately 72% less material than SealPlate sheeted film
- Each sheet is separated by an adhesive-free, perforated, color-coded green band
- The smooth lower surface of the dispenser can be used to seal the film to the plate
- Dispenser protects unused seals from contamination
- Lower support prop prevents dispensing bill from contacting surfaces to prevent contamination
- Replacement rolls can be easily installed by releasing the locking clasps on the dispenser
- General laboratory use
- Short-term storage
- Incubation
- ELISA
- -40°C to +120°C
Item#:
ASSEALMATEROLLS
For More Secure Seal to Minimize Evaporation
General Purpose Sealing Film For a More Secure Seal to Minimize Evaporation
General Purpose polypropylene films offer superior barrier properties to minimize evaporation and prevent well-to-well contamination. Ideal for use with polypropylene plates.- Certified DNase- & RNase- free
- Features good chemical resistance
- Provides a very secure seal to minimize evaporation, but is slightly harder to remove than SealPlate films
- Less rigid polypropylene film reduces aerosols upon removal
- Specially formulated adhesive minimizes plate residue
- Can be used as a temporary seal while awaiting further processing
Applications
- General laboratory use
- Short-term storage
- Incubation
- ELISA
Temperature Range
- -40°C to +120°C
Industry Standard for Sample Protection
SealPlate® Sealing Film - The Industry Standard for Sample Protection
SealPlate® minimizes evaporation, prevents well-to-well contamination and spillage. Eliminates the “edge effect” which can occur with plate lids (e.g. greater evaporation in the outside plate wells).
- Provides a secure seal and is easy to remove
- Rigid polyester film features good clarity and easy handling
- Can be used as a temporary economical seal while awaiting further processing
- Features two end-tabs with perforations
Applications
- General laboratory use
- Short-term storage
- Incubation
- ELISA
- -40°C to +120°C
Thick Adhesive, Leaves No Residue Behind
eXTReme™ 2 Seal Extra Strong Sealing Film
Extra strong adhesive minimizes evaporation without residue eXTReme Seal features an extra-strong thick adhesive to minimize evaporation, yet removes easily without leaving residue on the plate.
Product Info
Application: PCR and robotics
Temperature Range: -20°C to +120°C
Temperature Range: -20°C to +120°C
Product Info
- Features chamfered corners to eliminate plate overhang for robotics applications and tight storage conditions.
- Certified DNase- & RNase- free
- Next-generation adhesive formula provides better than-ever sample protection with improved evaporation rates
- Standard cut is ideal for use with raised-rim and non-skirted PCR plates
- Large cut is designed for greater plate coverage and easier positioning of the film to the plate
- Large cut is recommended for use with flat-top, semi skirted and full-skirted PCR plates as well as deep well plates
- NOT recommended for qPCR
Easy-to-pierce, Medical Grade Acrylic Adhesive
AlumaSeal® II™ Easy-to-pierce Aluminum Foil Seal
AlumaSeal® II™ is a soft, non-permeable aluminum foil with a strong, medical-grade acrylic adhesive. Compared to other aluminum foils, AlumaSeal® II™ has less tendency to roll back on itself when removing the backing paper.
- Certified DNase- & RNase- free
- Excellent chemical resistance (e.g. DMSO)
- Easily pierceable with single or multichannel pipettors and robotic probes
- 1.4mil conformable aluminum foil allows visual verification of the seal’s security around each well
Applications
- PCR
- Long-term storage
- Light sensitive assays
- Robotics
Temperature Range
- -80°C to +120°C
Helpful Tips
- End-tab removal before thermal cycling is highly recommended
- Remove diagonally from a corner to prevent tearing
FoilSeal™
Extra thick aluminum foil minimizes shredding upon removal
FoilSeal features a specially formulated adhesive that provides an excellent seal to minimize evaporation, reduce cross-contamination and prevent spillage.
Application: PCR, light sensitive assays and robotics
Temperature Range: -20°C to +120°C
Universal fit for all plate types (e.g. flat-top, raised-rim and non-skirted); the smaller dimensions and rounded corners result in no plate overhang for robotics applications.
- Certified DNase- & RNase- free
- Pierceable with a pipet tip or robotic probe for direct sample recovery
- 2.0mil aluminum foil removes easily without shredding or tearing
- The conformable nature of foil allows for the visual verification of the seal’s security around each well
- Not recommended for long-term storage
Helpful Tips:
- Remove diagonally from a corner to prevent tearing
Item#:
ASFOILSEALTM
Optically Clear, Pressure Activated, Non-tacky Silicone
ThermalSeal® RTS™ Optically Clear, Pressure Activated, Non-tacky Silicone Adhesive
The silicone adhesive is non-tacky until pressure is applied to the sealing surface which then creates a secure bond around the wells and perimeter of the plate. Also ideal for dry samples (e.g. soil, seeds, insects, etc.) because the non-activated adhesive above the wells remains non-tacky. A roller or sealing paddle is highly recommended for use with this product to ensure consistent and adequate pressure is applied during the sealing process.
- Provides an extremely strong seal to minimize evaporation
- Certified DNase- & RNase- free
- Chemically resistant to DMSO, acetonitrile, and methanol
- Ideal for use with flat-top, raised-rim and non-skirted PCR plates
- High optical clarity and low auto-fluorescence
- Available in roll format for automation: ThermalSeal® RTS™ Roll-Seal
- A complimentary sealing paddle is included in each box
Applications
- qPCR
- Long-term storage
- Protein crystallography
- HPLC
- -80°C to +105°C
Helpful Tips
- Sufficient pressure must be applied to activate the silicone adhesive
- Multiple swipes of the sealing paddle in both directions is highly recommended
- A 10 minute or greater wait period before thermal cycling increases the film-to-plate bond
1.4 mL Aluminum Adhesive Sealing Film
Soft and non-permeable, the 1.4 mL aluminum sealing foil offers optimum sealing for all PCR plates. Using a medical-grade acrylic adhesive, our foil seals are easily pierced with single or multi-channel pipettors and robotic probes. These soft foil seals, resist rolling back when removing the backing paper and seal tightly to both PCR and Deep Well Blocks.
Ideally suited for PCR and Cold Storage down to -80 °C. Exceptional adhesive properties and foil material durability yield virtually no sample evaporation or drying.
Specifications
| Length | 133.35 mm |
| Length (w/ end tabs removed) | 120.65 mm |
| Width | 80.01 mm |
| Overall Thickness | 1.4 mil |
| Adhesive Thickness | 1.1 mil |
| Material | Aluminum |
| Adhesive | Medical Grade Acrylic |
| Max. Temperature | 120 °C |
| Min. Temperature | -80 °C |
| Primary Usages | Storage or Sample Cover |
Item#:
ASADHESEALFLALM14
Optically Transparent, Highly Conformable Adhesive
ThermalSeal® RT2™ Optically Transparent, Highly Conformable Adhesive, Polyester Sealing Film
Designed for use with standard 96-well plates where rows must be selectively protected or accessed. Available in a smaller cut for raised-rim and non-skirted PCR plates: ThermalSeal® RT2RR
- Certified DNase- & RNase- free
- Ultra-high optical clarity
- Minimizes evaporation and cross-contamination
- Ideal for use with flat-top and hard-shell dual component (e.g. polycarbonate / polypropylene) PCR plates
- Not recommended for removal after thermal cycling
Application
- qPCR
- -40°C to +120°C
Helpful Tips
- Selection of the proper film size will minimize evaporation
- The film should not overhang or ride up the wall of a raised-rim plate
- More complete coverage of skirted flat-top plates will reduce evaporation in the outer wells
- End-tab removal before thermal cycling is highly recommended
Zone-Free™
Zone-Free is a multilayer film consisting of a top pierceable clear polyethylene film and a white polypropylene sublayer with 96 circular areas void of adhesive.
Application: Short-term storage and robotics
Temperature Range: -40°C to +90°C
The white sublayer aids in the alignment of the film to the plate; alignment of opposing corner wells ensures that all 96 wells will be properly aligned. The adhesive-free zones are 9mm on center to facilitate multi-channel pipetting without adhesive fouling of pipet tips or robotic probes.
- Pierceable
- Offers excellent chemical resistance
- Samples have minimal contact with adhesive due to the adhesive-free zones
Thick Adhesive, Leaves No Residue Behind
Click to shop new and improved eXTReme™ 2 Seal Extra Strong Sealing Film
eXTReme™ Seal Sealing Film with Extra Strong Adhesive Minimizing Evaporation Without Residue
eXTReme™ Seal features an extra-strong thick adhesive to minimize evaporation, yet removes easily without leaving residue on the plate.
Features chamfered corners to eliminate plate overhang for robotics applications and tight storage conditions.
- Certified DNase- & RNase- free
- Ideal for use with raised-rim and non-skirted PCR plates
- Available in a larger cut for flat-top semi-skirted and full-skirted PCR plates: eXTReme™ Seal, Large
Application
- PCR
- Robotics
- -20°C to +120°C
Helpful Tips
- Selection of the proper film size will minimize evaporation
- The film should not overhang or ride up the wall of a raised-rim plate
- More complete coverage of skirted flat-top plates will reduce evaporation in the outer wells
- End-tab removal before thermal cycling is highly recommended
Black Vinyl Sealing Film for Black Microplates
AbsorbMax™ Black Vinyl Sealing Film for Black Microplates
AbsorbMax™ is a black vinyl film that can be applied to either the top or bottom of the plate.- Minimizes background fluorescence and cross talk between plate wells
- Ideal as a back seal for black plates with clear well bottoms for top reading measurements
- Absorbs stray light, reducing the background caused by light scatter
- Protects light sensitive samples from degradation
- Features a single split liner for easy application
Applications
- Fluorescence assays
- Light sensitive sample protection
Temperature Range
- -40°C to +80°C
Web Content Viewer
Actions