S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Lab Essentials
MIDSCI carries a top of the line collection of lab essentials, including the likes of beakers, ice buckets, aluminum foil, and bags.
At MIDSCI, we stock only the best selection of numerous lab essential items that are sure to make your life easier and your experiments run that much smoother. Not to mention, many of these lab essentials protect your work and records!
For example, our lab notebooks defend your vital recordings from water and chemicals. The ice buckets we have protect your temperature sensitive samples. And the media bottles we carry are top of the line.
From mouse restraints to timers, you’ll find the lab essentials you need right here.
Rat restraints from IBI offer the researcher a new, humane method for restraining laboratory mice to administer injections and obtain needed samples. The rat restrains are available in three sizes.
MH-200 - The 2" diameter solid acrylic tubular mouse holder features 4 access ports and a full length vertical slot for easy access to specimen. The adjust slide/stop ensures the rat will not move during experiment.
MH-250 - The 2.5" diameter solid acrylic tubular mouse holder features 5 access ports and full length vertical slot for easy access to samples. The adjust slide/stop ensures the rat will not move during experiment.
MH-300 - The 3" diameter solid acrylic tubular mouse holder features 6 access ports and full length vertical slot for easy access to samples. The adjust slide/stop ensures the rat will not move during experiment.
C-Pette™ Blood Transfer Dispenser
- For safe and efficient blood dispensing
- Ideal for Point-of-Care (POC) use with any analyzer
- Minimizes aerosols
- Reduces the risk of lab-acquired infections
- Stainless steel canula
C-Pette™ blood collection tube dispenser for point of care testing instruments. Dispenses one drop of blood onto test cartridge or cassette. Dispenses blood drops easy with no need to open collection tubes. Fits standard glass or plastic blood tubes with rubber stoppers. Made of polystyrene and Stainless steel. Not Autoclavable.
MIDSCI # |
VWR # |
7630-500-000-9 |
89497-324 |
July 14, 2022
To whom it may concern:
Labcon is conducting a recall of the following products:
7626-500-000-9
and
7626-540-000-9
Product description: U-pette dispenser
Lot numbers affected: any lot number with 2 in the position as highlighted below.
XXXC8-2XX
See PDF for further information.
U-Pette Blood Collection Tube Dispenser
- For safe and efficient blood dispensing
- New ergonomic design for more control
- Minimizes aerosols, per CDC
- Reduces the risk of lab-aquired infections
Labcon’s U-Pette provides a quick and easy way to dispense blood into a test cassette without removing the cap from the collection tube. This greatly reduces the risk of infection due to aerosol exposure. U-Pette’s flexible sides allow for efficient and precise delivery of required sample amount, whether it’s one droplet or continuous flow dispensing. Labcon’s U-Pette fits all standard blood collection tubes and is ideal for use with many point of care analyzers such as the Abbott® i-Stat® Helena® Abrazo® and other POC Analyzers that requires the delivery of a sample to a test cartridge or cassette.
Compliant with the IVD Directive 98/79/EC and lot tested Endotoxin (Pyrogen) Free.
| MIDSCI # | VWR # |
| 7626-500-000-9 | N/A |
| 7626-540-000-9 | N/A |
Tip Top™ Dispenser Caps
- Convenient and Easy: Just tilt the tube and squeeze Tip Top® slightly to dispense one drop onto a slide.
- Safe Dispensing: You don't need to open the tube preventing spillage and exposure to infectious agents.
- Very Low Evaporation: A flexible cap is available to cover the Tip Top® so you can store samples longer.
- Medical Grade Resins: USP Class medical grade resins and packaging.
Safe Dispensing of Blood Samples
Tip Top® Dispenser Caps A safe and cost-effective way of dispensing samples in your lab. The Tip Top® is a disposable cone shaped cap that fits all standard 13 or 16mm blood collection tubes. A small opening allows you to dispense a sample without removing the Tip Top cap so you can prepare smears on slides or dispense into reagent wells or microcentrifuge tubes safely. Inside the tip of the Tip Top® is an integral porous filter that removes fibrin from the blood sample allowing for a perfect smear.
Tip Top® is a convenient alternative to pipetting from an open blood tube, just tilt the tube and squeeze to dispense one drop. And Tip Top® is safe you don't need to open the tube and pipet out of the tube so spillage is reduced along with potential exposure to infectious disease. Just carefully remove the stopper and replace with Tip Top®.
The Tip Top® dispenser cap can be used with almost any liquid. Made from chemically resistant polyethylene they can dispense serum, reagents, plasma, whole blood and CSF. The integral porous polyethylene filter efficiently separates serum and can also be used a a reagent blender.
Fits standard 13 x 100 and 16 x 100 collection tubes.
| MIDSCI # | VWR # |
| 5511-800-000-9 | 30128-604 |
| 5512-800-000-9 | N/A |
4 oz Urine Collection Containers with Full Turn Screw Caps
- Graduated to 120 mL
- Frosted writing area
- Clarified polypropylene (PP)
Designed for on-site collection and testing.
These 4-ounce urine collection containers are ideal for use in physician's offices and hospital settings. They feature a full turn screw cap for better leak resistance, molded graduation marks and a frosted writing area. The individually wrapped sterile containers come complete with an affixed patient ID label.
Sterile & Aseptic Containers:
- Individually wrapped
- Trilingual patient ID label (English, Spanish & French)
Material: Container = Polypropylene (PP) / Cap = Polyethylene
Dimensions: Container: 57.6 x 72 mm / Cap: 62 mm O.D.
- Holds mouse restraint at 45 degree angle
- Allows for easy access to tail for bleeds
- Holds restraint securely
The MH-550 is designed to hold the MH-100 and MH-125 at a 45 degree angle to allow for easy access to the mouse tail for bleeds or other procedures.
The stand is constructed of cast acrylic for years of reliable service.
Made in the USA
Security Cups for Urine or Specimen Collection
- 100 mL Cups
- Sample spouts may be cut with scissors or pierced with a syringe
- Impact and pressure resistant seal
These security containers are designed to provide secure and reliable tamper-proof seals for specimens in transit or storage. After specimen collection the screw cap is tightened first by hand, then by the special wrench, which engages teeth on the lids rim to create a locked and leak-proof seal. To access the specimen for testing procedures, large or small sample spouts may be cut with scissors or pierced with a syringe. Spouts can be resealed with the large or small plugs and returned to storage for further testing. The impact-resistant, durably constructed, and pressure-resistant seal offers excellent protection during handling and transport. Made of non-reactive polyethylene resin.
MIDSCI # |
VWR # |
4040-440-000-9 |
95026-604 |
4041-440-000-9 |
95026-602 |
4043-440-000-9 |
95026-606 |
For Identifying Autograms (Radiological and Chemilluminescent)
- Ideal for chemilluminescence and radiological autography
- Great for documentation and archiving
- Use your own codes & symbols
- Fast & easy marking system
- Non-radioactive
Radtape's phosphorescent, adhesive labels may be cut to the specific size and shape needed for each individual membrane, dried gel or microarray. An ordinary pen may be used to mark the label using the investigator's own codes and symbols. The custom label may then be peeled from its backing and affixed to the membrane, gel or microarray. Once placed against film, Radtape exposes a negative image of the markings directly onto the autorad, thus producing a permanent record of the experiment. Choose RadTape Plus for a heavy duty, water-proof alternative to RadTape.
Rigid single mold polyurethane provides durability for chilling your temperature sensitive samples. Excellent insulation properties for ultra cold--use with ice, ice-salt slurries, and more. Minimize evaporation loss with snug fit lid. Easily remove with comfortable recessed knobs. Keyed lid and base fit together to conveniently store lid under base. Use handy pour spout with melted ice, water, and solutions. Ergonomic handles safely transport bucket or pan from work area to sink. Deep internal cavity has enough room to add one of your Heathrow racks. Tapered sides make stacking and storage compact.
Small Erlenmeyer Flask
- Lightweight plastic material is easier and safer to handle than glass
- Designed for mammalian suspension culture applications as well as bacterial & yeast culture
- Baffled flasks enhance both vertical and circular culture movement to improve aeration
- Vent cap options are available to prevent the common mistake of unintentionally sealing the cap completely and preventing gas exchange
- Polycarbonate available with vent cap only
- Vent caps with 0.22μm hydrophobic membrane feature an oversized vent area for improved gas exchange without contamination
- All flasks include molded graduation lines
- Baffled flasks feature a molded 1/3 fill line to help ensure optimal working volumes
- Individually bagged for easy storage and handling
- Medical grade virgin Polycarbonate is autoclavable (temperature range of -80°C – 121°C)
- Medical grade virgin PETG reduces gas permeability (temperature range of -80°C – 60°C)
- Working volumes are recommendations only; optimize as required for individual protocols
- Designed for mammalian suspension culture applications as well as bacterial & yeast culture
- Vent with over-sized vent area feature 0.22 µm hydrophobic membrane which allows for improved gas exchange without contamination
- Avoid contamination with single-use, pre-sterilized flasks
- Lightweight material is easier to handle than glass
- Flasks include molded graduation lines
- Individually bagged for easy storage and handling
- Medical grade virgin Polycarbonate is autoclavable
- Large size: 17.25 x 13.50 x 4.96 inches
- Choice of blue, green, or pink
- NO SWEAT - Thick pan walls will not sweat or leave puddles of condensation on the benchtop
- DURABLE - Made of triple density expanded polystyrene creating a durable container that is virtually unbreakable
- SUPER INSULATING - Preserves ice up to 30% longer than conventional ice pans
- STACKABLE - Designed with an inner edge enabling the pans to stack on top of one another for easy storage and to maximize bench-top space
- LIGHTWEIGHT - Extremely lightweight (1.1oz, 4.7oz. and 11.4oz) and easy to handle. Feature a molded lip around the edge for carefree moving/carrying
- CHEMICALLY RESISTANT - Resistant to mild chemicals as well as ice-alcohol slurry, dry ice and liquid nitrogen
DryChill™ Ice-free Cooling Block
The DryChill™ cooling blocks are designed to store samples safely on the lab-bench without sample degradation due to temperature increase or fluctuation. Unlike traditional ice buckets, these blocks do not require any ice and are uniquely designed to minimize condensation, resulting in a convenient, mess-free cooling.
Each DryChill™ Cooling Block utilizes a proprietary gel refrigerant, designed to maintain cold (but not freezing) temperatures for extended time periods. Once the block temperature begins to warm, the visual indicator alerts the user by changing from purple to pink.
Four blocks are available for accepting a wide variety of commonly used research tubes and plates.
- Ice-free, stable cooling for sample tubes
- Unique design reduces condensation
- Maintains 4°C for up to +200 minutes
- 4 sizes for various tubes up to 50 mL
- Visual temperature indicator
Specifications
| Temperature | ~4°C for up to +230 mins. | |
| Capacity | DC9602 - DC4020 - DC0650 - DC1215 - | 96 x 0.2 mL 40 x 1.5/2.0 mL 6 x 50 mL 12 x 15 mL |
| Dimensions | DC9602 - DC4020 - DC0650 - DC1215 - | 5.9 x 4.2 x 2.8 in. 14.7 x 10.5 x 7 cm 5.9 x 4.2 x 3.8 in. 14.7 x 10.5 x 9.6 cm |
| Weight | 2.2 lbs | |
| Warranty | 2 Years | |
Web Content Viewer
Actions