PR1MA™ Microplate Microcentrifuge

• Quickly spins down droplets in PCR plates (less than 20 seconds)
• Accepts skirted, non-skirted, standard, and most microtiter PCR plates
• 50% smaller than traditional centrifuges
• Unique rotor design prevents sample spillage

The PR1MA™ Microplate Microcentrifuge is the first mini-sized centrifuge with a swing-out rotor for microplates. Centrifuging plates before PCR ensures all reactants are in the bottom of the wells for proper concentrations and improved yields.

The easily accessible rotor chamber includes two plate carriers that rest at a 75° angle. This allows plates to be inserted confidently without sealing tapes or caps. Upon closing the centrifuge lid, the rotor accelerates and the centrifugal force "swings" the plates into a horizontal position, concentrating any droplets on the plate walls to the well bottoms.

Specifications

Accessories 

C2000-A02 - This tube adapter for the PCRCENT Plate Centrifuge holds 96 0.2 mL tubes or 8 and 12 position PCR strips. It comes 2 per pack.

C2000-DWMP - This optional rotor for the PCRCENT Plate Centrifuge has carriers for deep well plates up to 35 mm tall.

Specifications

 
PR1MA™ Vortex Mixer with Multi-Head™

• A traditional cup head for general-purpose mixing of conical tubes plus it holds up to 8 microcentrifuge tubes
• Powerful motor for instant vortexing
• Continuous or "touch" operation
• Increased vortexing speed up to 3,400 rpm
• Q-Drive™ technology provides smooth vortexing action

The PR1MA™ Vortex Mixer is MORE than your standard vortex mixer. The unique design of the Multi-Head™ (included) features a traditional cup head for general-purpose mixing, plus holds up to eight microcentrifuge tubes.

The drive system is balanced with Q-Drive™ technology, providing a smooth vortexing action, while minimizing noise and excessive vibration. This results in quieter, more efficient, and longer lasting operation. Increased speed, up to 3,400 rpm produces an instant vortex of even the largest sample sizes, including full 50 mL tubes.

Other features include: “no-walk” suction feet, cold room/incubator compatibility, and spill-proof electronic controls.
 
 

Specifications
 

Speed Range	200 to 3,400 rpm
Operating Modes	Touch or Continuous
Operating Temperature Range	+4°C to +65°C
Dimensions	5 x 6.3 x 6.7 in.
Weight	8.4 lb | 3.8 kg
Electrical	115V AC, 60 Hz, 1.5A
	230V AC, 50 Hz, 0.75A
	230V AC, 60 Hz, 0.75A
Warranty	2 years

 
 
Accessories

Item #	Description
BV1000-FLAT	Vortexer Flat head
BV1000-COMBO	COMBO™  head
BV1000-H15	Horizontal head, for 12 x 1.5 mL
BV1000-H150	Horizontal head, for 4 x 15 mL
BV1000-H500	Horizontal head, for 2 x 50 mL

  

 
PR1MA™ Vortex Mixer

• Powerful motor for INSTANT vortexing
• Continuous or “touch” operation
• Q-Drive™ dynamic balancing system
• Variable speed from 200 to 3200 rpm
• Wide variety of accessories

The PR1MA™ Vortex Mixer sets the new standard in vortex mixing. With advanced Q-Drive™ technology, the PR1MA™ Vortex Mixer provides smooth instant vortexing of even the largest sample sizes, including full 50 mL tubes. The unique counter-balance system creates maximum vortexing action while minimizing noise and excessive vibration. This results in quieter, more efficient, and longer-lasting operation.

Other features include “no-walk” suction feet, cold room/incubator compatibility, and spill-proof electronic controls.

Specifications

PR1MA™ 12 Mini Microcentrifuge

 
Spin microtubes and PCR strips simultaneously without changing rotors!
 
Unlike traditional mini centrifuges, the PR1MA™ 12 eliminates the need to change rotors when switching between microtubes and PCR strips. The included, unique COMBI-Rotor™ is all that is required for running 12 microtubes and 4 PCR strips simultaneously.
 
COMBI-Rotor™, for tubes and strips
 

• Twice the capacity of traditional mini centrifuges
• Near silent operation
• Starts & stops with closing/opening of the lid
• 1-year warranty

Specifications 

PR1MA™ 8 Mini Microcentrifuge

• Eight Position Microtube rotor
• Storage compartment for PCR rotor
• Near silent operation
• Starts and stops in seconds

The PR1MA™ Mini is a personal centrifuge that virtually fits in the palm of your hand. An eight-place rotor is included and comes installed. A second rotor for 0.2 mL PCR tubes and strips is also included and stored with the rotor removal key in a convenient compartment on the bottom of the centrifuge.

All centrifuges include the 8 x 1.5/2.0 mL microtube rotor, two position PCR strip rotor, and 8 adapters for 0.5 mL tubes.

Specifications
 

Implen NanoPhotometer® NP80 Spectrometer

Accurate
Patented Sample Compression Technology™ with guaranteed fixed path lengths allows for unmatched accuracy and precision. Independent from surface tension and free from evaporation. Lifetime accuracy guaranteed.

Recalibration-free
Sealed optics without path length drift eliminates the need for costly and time consuming recalibrations. Durable, inert surfaces provide easy to clean, scratch resistant surfaces that do not require reconditioning.

Easy
NPOS Operating System: intuitive graphical user interfaces (GUI) providing one-step method access, pre-programmed and customizable applications based on the ultimate level of data security.

Flexible
Control your NanoPhotometer® via Touch Screen / Smart Phone / Tablet / PC. Equipped with Wi-Fi, USB A/B, HDMI, and LAN interface connections. Define and store your own methods.

Mobile
Spectroscopy can now be taken anywhere. The optional integrated battery pack provides up to 8 hours of stand-alone battery powered operation.

Powerful
Built-in computer with a high performance Q7 quad core 1 GHz processor and 8 GB of onboard memory provides rapid analysis and easy data storage.

Fast
Power on and instantly measure without lamp warm-up time. Full scan capability from 200 - 900 nm provides rapid and complete sample analysis in only 3.5 - 6 sec.

• The lightweight, compact Portable Pipet-Aid®
• Three-speed settings provide more precise control for both aspirate and dispense modes
• Easy access battery replacement
• EZ Grip nosepiece with double membrane filter
• Removable stand
• Holster-type wall bracket included

Specifically designed to minimize operator fatigue, the Portable Pipet-Aid XP is smaller and lightweight. It accepts most pipets from 1 to 100 mL.

Each aspiration and dispense button has three speeds, (F) Fast, (M) Medium, (S) Slow. The medium speed is suitable for most routine techniques. Fast speed can deliver up to 50 mL in 5 seconds and can be used for rapid filling of large pipets or breaking up cell clumps. Slow speed is ideal when using small pipets or when more precise delivery is required. A gravity drain model is available which substitutes a gravity drain (G) function for the fast (F) mode on the dispense button.

The XP is powered by a 9 volt (Ni-MH) rechargeable battery.

A Tissue Culture Nosepiece, which features a unique filter element, will cease to allow air to pass in either direction if it becomes wet, alerting the user to possible contamination of the rubber insert.

Size: 5.5"
Weight: 7.5 oz.
Capacity: Accepts 1 to 100 mL pipets
Battery: 9 Volt Ni-MH

Benchmark™ INCU-SHAKER™ 10 L 

• Large platform 18 x 18 in., up to 5 x 2 L
• TOUCH screen control over time, speed and temperature
• Exceptional temperature uniformity
• Horizontally circular 19 mm orbit for aeration & mixing
• Instantly change flask clamps with MAGic Clamp™ accessories
• Optional shelf for Petri dishes, microplates, etc.
• Incu-Shaker 10LR (Refrigerated) for temperatures down to RT -15°C

The Incu-Shaker™ 10L provides digitally regulated temperature with orbital mixing optimized for culturing a variety of types of cells. The standard platform (included) features a non-slip rubber coated surface ideal for TC flasks, petri dishes, and staining trays. The convenient MAGic CLAMP™ Platform is also available for use with Erlenmeyer flasks and test tube racks. The unique, magnetic attachment method is the easiest way to instantly change between flask clamps of different sizes.
 

Features a Touch Screen with 3 Control Views:

Standard View

Advanced Temperature View

Advanced Shaker View

Specifications

Available Platforms for IS-1010 Incu-Shaker 

Flask Clamp Capacities

 
Benchmark™ Mini Nutating Rocker

• Includes dimpled mat; ideal for mixing in blood & centrifuge tubes
• Tri-directional motion for thorough, uniform mixing
• Cold room and incubator safe

The Mini Rocker is a multi-functional shaker that provides a three-dimensional nutating motion for thorough foam-free mixing in tubes as well as a variety of flat vessels.  The model comes standard with an autoclavable dimpled mat and optional flat mats are available for mixing with other vessel types. This mixer features maintenance-free, brushless motors and is capable of loads up to 2 kg, and is safe for use in cold rooms or incubators.
 

The Benchmark™ Mini Nutating Rocker comes with a flat cord and an 8 x 6-inch platform with dimpled and flat mats. The rocker is designed to fit inside Digital Mini Incubators (H2200-H/H220-HC)

Specifications 

Benchmixer™ XL Multi-Tube Vortexer

• Hands-free, high-capacity vortexing
• Up to 2500rpm, a true vortex in every tube
• Assortment of accessories for a variety of tubes, flasks & plates
• Pulsing program for interval mixing
• Fits almost any tube rack

The Benchmixer™ XL is a heavy-duty vortex mixer designed to facilitate hands-free mixing in tubes, flasks, vials, or cylinders. It is ideal for the QuEChERS pesticide analysis method and is instantly adaptable to a broad range of vessels and racks. The precisely balanced drive system includes an oversized motor that delivers accurate, reproducible speeds up to 2500 rpm with rattle-free operation and minimal vibration. The programmable pulsing function allows for time-specific interval mixing and increasing agitation.

The 7 x 12 inch platform accommodates a wide variety of standard, pre-drilled tube racks and can be easily adapted to almost any type of vessel commonly found in the laboratory.
Using BenchMixer™ XL is easy-after loading the sample rack and tightening the locking knobs, select the desired speed and run time on the large digital control panel, then press Start. The BenchMIxer™ XL can run unattended for up to 100 hours.
 
BenchMixer™ XL's large capacity and adaptability make it an ideal choice for the medium to high throughput laboratory.

Specifications

Speed Range	500 to 2,500 rpm
Max Capacity	6 X 250 mL
Orbit	3.6 mm
Timer	1 min. to 99 hr 59 min.
Platform Dimensions	12 X 7 in | 30 X 17.8 cm
Exterior Dimensions	15 X 9.2 X 16.5 in 38.5 X 23.5 X 42 cm
Operating Temp. Range	4 °C to 65 ° C
Weight	13 kg/29 lbs
Electrical	100 to 240 V, 50/60 Hz
Warranty	2 years

 

Item #	Description
BV1010-05	Tube Rack, 96 x 0.5 mL (8 mm)
BV1010-1520	Tube Rack, 96 x 1.5/2.0 mL (10 mm)
BV1010-12	Tube Rack, 50 x 12 mm (included)
BV1010-13	Tube Rack, 50 x 13 mm
BV1010-150	Tube Rack, 50 x 15 mL (16.58 mm)
BV1010-500	Tube Rack, 15 x 50 mL (29 mm)
BV1010-25	Tube Rack, 15 x 25 mm
BV1010-50H	Tube Rack, 9 x 50 mL Horizontal (QuEChERS method)
BV1010-V50	Tube Rack, 6 x 50 mL Volumetric Flask
BV1010-V125	Tube Rack, 6 x 125 mL Volumetric Flask
BV1010-V250	Tube Rack, 6 x 250 mL Volumetric Flask
BV1010-MP	Rack for up to 3 Microplates or 96-well Micro Tube Racks
BV1010-MP02	Carrier for above, 96 x 0.2 mL Tubes or Strips (3pk)