S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Sealing Mat Features:
- Multi-use silicone sealing mats
- Natural color
- Autoclavable and washable
- Pierceable and self-sealing
- Chemical Resistance - use with confidence in any application requiring the presence of DMSO and similarly harsh solvents
- Specifically designed for Axygen deep well and microplates - complete system available for chemical assays
- Cost effective - can be reused
- Contains NO adhesives - no extractables to contaminate samples
- Tight seal to the plate - no sample evaporation or well-to-well contamination
- Usable within wide temperature range - from -80°C up to 121°C
- High contrast alphanumeric grid - for easy well identification
- Fits P-DW-11-C, P-DW-20-C, P-96-450R-C, P-96-450V-C
Adhesive Sealing Films
Soft and impermeable aluminum sealing foils with medical grade acrylic adhesive. Once applied, the seal adheres aggressively, forming a tight positive seal preventing evaporation of VOCs, sample loss in storage, drying, cross contamination, and reducing the risk of aerosols and pathogens venting.
- Suitable for sealing all standard PCR plates, micro plates, and deep well blocks.
- Perfect for light sensitive samples
- Easily pierced with single or multi-channel pipettors and probes
- Withstands long term storage down to -80°C
- Single tabbed backing paper removes easily; aluminum sheet resist rolling back.
Please know that the manufacturer has suspended manufacturing this product indefinitely.
We suggest purchasing PR1MA PCR Plastics.
Contact your rep or email tech@midsci.com for more information.
Sealing Mat for 96-Well PCR Plates
Reusable and versatile, Axygen AxyMats minimize evaporation in a wide range of temperatures in PCR and storage applications.
This product is no longer available.
For a different Silicone Sealing Mats, visit here.
Silicone Sealing Mat for 96 plates
- Made of research-grade silicone
- Scored wells for sample access
- Perforations re-seal after access
- Resists coring and tearing
- Eliminates cross-talk between wells
- Also works as a compression mat
- Suitable for standard PCR thermocycling
- Mats can be reused
- For use with 96-well PCR plates
- Printed alpha numeric grid for easy reference
- Certified to be free of RNase, DNase, DNA, PCR inhibitors, and Pyrogen contamination.
Works as a plate seal (to eliminate cross contamination) and compression mat all-in-one!
Our compression molded 96-round plug, silicone sealing mats for PCR plates minimize sample evaporation in a wide range of temperatures. These mats are chemically resistant and reusable; containing no adhesives or extractables to contaminate samples. Made of research-grade silicone, they can be autoclaved, and following a 10% bleach wash and ethanol rinse protocol may be reused.
Wells are scored (cut 80% of the way through, but not all of the way) to allow for sample access via pipettor, syringe, or probe. These scored perforations will seal themselves, after penetration, ensuring an airtight closure to the well.
EZcap™ PCR FilmStrips
- Certified DNase- & RNase- free
- Features an extra strong, thick adhesive to minimize evaporation
- Each sheet contains 8 strips on a continuous liner
- A non-locking workstation is recommended for sample prep (e.g. 96-well round-boom plate)
- Removal of the end-tabs at the perforations is recommended before thermal cycling
- A final sealing step is highly recommended in the thermal cycler because 8-tube strips flex during handling
AlumaSeal® Easy-to-pierce Aluminum Foil Seal for Direct Sample Recovery
AlumaSeal® 384 provides a secure seal for 384-well plates to minimize evaporation, reduce cross-contamination and prevent spillage.
AlumaSeal® 96 provides a secure seal for 96-well raised-rim and non-skirted PCR plates to minimize evaporation, reduce cross-contamination and prevent spillage.
- Certified DNase- & RNase- free
- Ideal for use with 384-well and deep-well plates (or select AlumaSeal® 96™ for smaller cut for raised-rim and non-skirted PCR plates.)
- Features one end-tab with no perforation
- Pierceable with a pipet tip or robotic probe for direct sample recovery
- Large cut allows for easier positioning of the foil to the plate via edge of plate alignment vs. centering
- Available in roll format for automation: AlumaSeal® Roll-Seal
- PCR
- Long-term storage
- Light sensitive assays
- Robotics
- -80°C to +120°C
- End-tab removal before thermal cycling is highly recommended
- Remove diagonally from a corner to prevent tearing
- Selection of the proper film size will minimize evaporation
- The film should not overhang or ride up the wall of a raised-rim plate
- More complete coverage of skirted flat-top plates will reduce evaporation in the outer wells
SealPlate® SealMate™ Rolls for Fast and Efficient Microplate Sealing
The SealMate SealPlate Starter Kit features a re-usable dispenser and two rolls of perforated film.
The dispenser facilitates the quick and easy dispensing of film from a roll allowing microplates to be sealed three times faster than using sheeted films. Cost-effective replacement rolls are sold separately. Ideal for use under the hood; the SealMate dispenser minimizes film contamination.
- Environmentally friendly; no paper liner to remove and discard; utilizes approximately 72% less material than SealPlate sheeted film
- Each sheet is separated by an adhesive-free, perforated, color-coded green band
- The smooth lower surface of the dispenser can be used to seal the film to the plate
- Dispenser protects unused seals from contamination
- Lower support prop prevents dispensing bill from contacting surfaces to prevent contamination
- Replacement rolls can be easily installed by releasing the locking clasps on the dispenser
- General laboratory use
- Short-term storage
- Incubation
- ELISA
- -40°C to +120°C
PCR SILICONE SEALING MAT - 96
- Made of research-grade silicone
- Scored wells for sample access
- Perforations re-seal after access
- Resists coring and tearing
- Eliminates cross-talk between wells
- Also works as a compression mat
- Suitable for standard PCR thermocycling
- Mats can be reused
- For use with 96-well PCR plates
- Printed alpha numeric grid for easy reference
- Certified to be free of RNase, DNase, DNA, PCR inhibitors, and Pyrogen contamination.
Works as a plate seal (to eliminate cross contamination) and compression mat all-in-one!
Our compression molded 96-round plug, silicone sealing mats for PCR plates minimize sample evaporation in a wide range of temperatures. These mats are chemically resistant and reusable; containing no adhesives or extractables to contaminate samples. Made of research-grade silicone, they can be autoclaved, and following a 10% bleach wash and ethanol rinse protocol may be reused.
Wells are scored (cut 80% of the way through, but not all of the way) to allow for sample access via pipettor, syringe, or probe. These scored perforations will seal themselves, after penetration, ensuring an airtight closure to the well.
Film-Sealing Paddles
- Sealing paddles complete the application of sealing films
- Press the film with the sealing paddle to assure a secure uniform seal around all wells of a microplate
- Paddles fit within the edge of raised-rim plates
- Sealing Roller completes the application of sealing films
- Press the film with the accessory plate roller assure a secure uniform seal around all wells of a microplate
FoilSeal™ RollMate™ Dispenser +1 Roll of FoilSeal™ Film, 500 Pre-Scored Sheets
- Certified DNase- & RNase- free
- Pierceable with a pipet tip or robotic probe for direct sample recovery
- 2.0mil aluminum foil removes easily without tearing
- The conformable nature of foil allows for the visual verification of the seal’s security around each well
- Not recommended for long-term cold storage
- PCR
- Light sensitive assays
- Short-term storage
- Robotics
- -20°C to +120°C
- End-tab removal before thermal cycling is highly recommended
- Remove diagonally from a corner to prevent tearing
Web Content Viewer
Actions