S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Adhesive Sealing Film, Polyester, 3.1 mil
The polyester films are a great general purpose seal; ideal for sample protection and elimination of well-to-well sample cross contamination. The acrylic adhesive offers a strong bond that seals tightly on polypropylene and polystyrene plates.
This seal is ideally suited for short term storage, Elisa assays, prevention of sample loss, and general lab usage.
The paper backing of this film is scored on both ends to allow for two handed (precise) placement on the plate.
For PCR applications see our standard PCR film or our Real Time PCR film.
For applications where accessing samples through the seal with pipet tips or a probe is required, see the pierceable aluminum (MID-PCR-200) film.
Specifications
| Length | 146.05 mm |
| Length (w/ end tabs removed) | 119.05 mm |
| Width | 79.38 mm |
| Overall Thickness | 3.1 mil |
| Adhesive Thickness | 1.1 mil |
| Material | Polyester |
| Adhesive | Medical Grade Acrylic |
| Max. Temperature | 120 °C |
| Min. Temperature | -40 °C |
| Primary Usages | Elisa, Storage or Sample Cover |
Item#:
ASADHESIVEPOLSTER31
Adhesive Sealing Film, Aluminum, 1.4 mil
Soft and non-permeable, the 1.4 mil aluminum sealing foil offers optimum sealing for all PCR plates. Using a medical-grade acrylic adhesive, our foil seals are easily pierced with single or multi-channel pipettors and robotic probes. These soft foil seals, resist rolling back when removing the backing paper and seal tightly to both PCR and Deep Well Blocks.
Ideally suited for PCR and Cold Storage down to -80 °C. Exceptional adhesive properties and foil material durability yield virtually no sample evaporation or drying.
Specifications
| Length | 133.35 mm |
| Length (w/ end tabs removed) | 120.65 mm |
| Width | 80.01 mm |
| Overall Thickness | 1.4 mil |
| Adhesive Thickness | 1.1 mil |
| Material | Aluminum |
| Adhesive | Medical Grade Acrylic |
| Max. Temperature | 120 °C |
| Min. Temperature | -80 °C |
| Primary Usages | Storage or Sample Cover |
Item#:
ASADHESEALFLALM14
Adhesive Sealing Film, Polyolefin, 2.8 mil
Certified free of RNase, DNase, Pyrogen, and nucleic-acid contamination.
Specifications
These optically clear polyester films are ideally suited for Real Time PCR (qPCR). They feature an inert, ultra-clear, and strong encapsulated silicone adhesive that provides extraordinary performance in real-time PCR applications.
Encapsulated silicone greatly reduces the risk of sample contamination due to exposure to adhesive. Once the film is pressed onto the plate, the raised portion of the well penetrates the encapsulation and a tight seal is formed on just that surface (not over the sample). This silicone seal adheres aggressively and diminishes the possibility of "Edge Effect".
The plasticized backing of this film is scored on both ends to allow for two handed (precise) placement on the plate. Both film and adhesive maintain incredible clarity and are the choice for highly demanding manual and automated processes.
Specifications
| Length | 141.27 mm |
| Length (w/ end tabs removed) | 117.5 mm |
| Width | 77.8 mm |
| Overall Thickness | 2.8 mil |
| Adhesive Thickness | 2.0 mil |
| Material | Polyester |
| Adhesive | Encapsulated Silicone |
| Max. Temperature | 120 °C |
| Min. Temperature | -40 °C |
| Primary Usages | Real Time PCR (qPCR), PCR |
Item#:
ASADHESIVEPOLFIN28
Soft, Extra Thick, Conformable Adhesive
ThermalSeal® 2™ and ThermalSeal® Advanced Sealing Film
ThermalSeal® 2™ and ThermalSeal® Advanced feature a soft, extra thick, conformable adhesive that forms a very strong seal around raised wells to minimize evaporation and cross-contamination.
- Certified DNase- & RNase- free
- Ideal for use with flat-top, semi-skirted and full-skirted PCR plates
- Compatible with hard-shell dual component (e.g. polycarbonate/polypropylene) PCR plates
- Large cut allows for easier positioning of the film to the plate via edge of plate alignment vs. centering
- Available in a smaller cut for raised-rim and non-skirted PCR plates: ThermalSeal® Advanced
Application
- PCR
Temperature Range
- -40°C to +120°C
Helpful Tips
- Selection of the proper film size will minimize evaporation
- The film should not overhang or ride up the wall of a raised-rim plate
- More complete coverage of skirted flat-top plates will reduce evaporation in the outer wells
- End-tab removal before thermal cycling is highly recommended
For Use with White Microplates
BrightMax™ White, Light-reflecting, Vinyl Sealing Film
Designed for use with white microplates.
- The light reflective properties on clear-bottom plates maximize the sensitivity of bioluminescence and chemiluminescence assays in bottom-reading luminometers
- Maximizes intensity and signal-to-noise ratios in luminescence assays
- May be used as a backing matrix for microscopy of punch-out samples for filter plates (e.g. ELISPOT assays)
- Features a single split liner for easy application
Applications
- Luminescence
- Fluorescence
- Microscopy
- -40°C to +80°C
Thick Adhesive, Leaves No Residue Behind
eXTReme™ 2 Seal Extra Strong Sealing Film
Extra strong adhesive minimizes evaporation without residue eXTReme Seal features an extra-strong thick adhesive to minimize evaporation, yet removes easily without leaving residue on the plate.
Product Info
Application: PCR and robotics
Temperature Range: -20°C to +120°C
Temperature Range: -20°C to +120°C
Product Info
- Features chamfered corners to eliminate plate overhang for robotics applications and tight storage conditions.
- Certified DNase- & RNase- free
- Next-generation adhesive formula provides better than-ever sample protection with improved evaporation rates
- Standard cut is ideal for use with raised-rim and non-skirted PCR plates
- Large cut is designed for greater plate coverage and easier positioning of the film to the plate
- Large cut is recommended for use with flat-top, semi skirted and full-skirted PCR plates as well as deep well plates
- NOT recommended for qPCR
Please know that the manufacturer has suspended manufacturing this product indefinitely.
We suggest purchasing PR1MA PCR Plastics.
Contact your rep or email tech@midsci.com for more information.
Platemax CyclerSeal Sealing Film
- Provides exceptional seal to safeguard samples during transport or storage
- Eliminates well to well contamination and cross-over in PCR applications when used with Axygen's compression mat
- Polypropylene film is wide temperature range compatible, -40° to 104°C
- PCR-TS is designed for ELISA/EIA applications
- PCR-TS-900 is twice as thick (as PCR-TS) and is suitable for water-bath and other difficult PCR applications
Item#:
ASPCRFILM5
- Provides exceptional seal under the widest temperature conditions and reagents
- Wide temperature range compatible, -80° to 104°C
- Ideal for light sensitive samples and PCR or storage
- Uniform adhesive provides optimum well sealing
- PCR-AS-200 is pierceable
- 100 films/pack
Item#:
ASPCRFILM4
Starter Kits and Refills
AeraSeal™ SealMate™ Rolls for Fast and Efficient Microplate Sealing
The AeraSeal™ SealMate™ Starter Kit features a re-usable dispenser and two rolls of perforated film.
The dispenser facilitates the quick and easy dispensing of film from a roll allowing microplates to be sealed three times faster than using sheeted films. Cost-effective replacement rolls are sold separately. Ideal for use under the hood; the SealMate™ dispenser minimizes film contamination.
The dispenser facilitates the quick and easy dispensing of film from a roll allowing microplates to be sealed three times faster than using sheeted films. Cost-effective replacement rolls are sold separately. Ideal for use under the hood; the SealMate™ dispenser minimizes film contamination.
- Environmentally friendly; no paper liner to remove and discard; utilizes approximately 59% less material than AeraSeal™ sheeted film
- Each sheet is separated by an adhesive-free, perforated, color-coded red band
- The smooth lower surface of the dispenser can be used to seal the film to the plate
- Dispenser protects unused seals from contamination
- Lower support prop prevents dispensing bill from contacting surfaces to prevent contamination
- Replacement rolls can be easily installed by releasing the locking clasps on the dispenser
- Designed to facilitate air and CO2 exchange
- Pore size from 10 µm to 50 µm
- Moisture vapor transmission rate = 4,200g/m²/24hr
- Easy-to-pierce with serological pipets and pipet tips for direct sample recovery
Applications
- Cell culture
- Tissue culture
- Bacterial cultures
Temperature Range
- -20°C to +80°C
Web Content Viewer
Actions