|◀ 37 - 43 of 43 ▶|
View:

PCR Tube

Individual tubes with attached domed caps minimize evaporation especially when used with small sample volumes, in thermal cyclers with heated lids, or older units.  Achieve even and precise thermal transfer while minimizing evaporation with our 0.2ml, attached dome cap tubes.  The domed cap design is to assist condensate to re-enter the reaction mixture and gain contact with heated lids for improved heat transfer.

Precision molded as a single part creates parts with uniform fit and reduce sample evaporation.  Tubes with attached caps are regularly quality tested for evaporation rates and must exhibit less than 3% sample loss.

Individual tube volumes

Recommended for low throughput applications, these tubes are designed to fit all standard 0.2mL block thermal cyclers.  Each tube is joined to a cap, their thin and consistent wall thickness optimizes heat transfer to maximize yield.

Packaged in resealable bags

All ILP PCR products are non-sterile and certified to be free of detectable RNase, DNases, DNA, and pyrogen contamination.

Item#:
ASPCRTUBESSI

Glass Coated Plate, 96 Round Well U-Bottom 14.40mm Height, 500ul

 
Glass coated, polypropylene microplates.  The 200nm thick coating of silicone dioxide creates a cradle of non-binding and inert glass to protect your sample.  This SiO2 coating helps to:

  • Reduced binding
  • Increase chemical resistance
  • Protect the same from any potential compounds leached from the plastic.
The plate design:

  • Holds up to 500ul per well of working volume in a 14.4mm high micro-plate
  • Unique open bottom design maximizes volume, while larger diameter wells improve sample access and mixing
  • ANSI/SLAS 1-2004 compliant footprint (SBS) allows for automated usage with grippers, stackers, and heater/cooler blocks.
  • Raised rims on each well make for easy and secure sealing with adhesive films, silicone mats, or heat sealing films, help prevent cross contamination, and reduce sample loss in storage
  • Manufactured from chemically resistant and inert virgin polypropylene
  • Lot to lot tested and certified to be free of RNase, DNase, and Pyrogen contamination.

Specifications:

 
General Features
Volumes & Dimensions
Performance
Shipping & HandlingQuantity: 1 Plate/Pack, 10 Packs/Case, 1 Plate/Pack, 100 Packs/Case
Item#:
ASGC96RUB1440H500U

Plate, 96 Round Well U-Bottom 43.90mm Height, 1.6m


This 2.0mL 96-well plate is ideal for separations of nucleic acids and clean-up procedures with magnetic beads. The unique square top with round bottom design allows for maximum volume, optimum mixing, and enhanced separation/recovery of magnetic beads. Separated round well bottoms allow for the use of ring or post style magnetic plates.

Raised rims on each well make for easy and secure sealing with adhesive films, silicone mats, or heat sealing films. Manufactured from virgin polypropylene (no mold release agents or regrind) and certified to be free of RNase, DNase, and Pyrogen contamination.


 
Specifications:


General Features
Volumes & Dimensions
Performance
Shipping & HandlingQuantity: 5 Plates/Pack, 10 Packs/Case
 
Item#:
AS96RUB4390H16M

 
96-Deep Well Plate, Round Well, U Bottom 45mm


This 8 mm round well U-bottom plate combines working volume with automation friendly design. Sturdy and warp-resistant design with ultra-flat surfaces and rigid construction, this plate is ideal for high throughput screening, sample collection, compound storage, screening, and combinatorial chemistry applications. It is compatible with stackers, grippers, heater/cooler blocks, and other instruments that comply with the ANSI/SLAS 2004-1 (SBS) footprint.

Raised rims on each well help protect from cross-contamination, minimize sample loss during storage, and make for enhanced sealing with adhesive films, silicone mats, or heat sealing films.
Made from medical grade virgin polypropylene (no mold release agents or regrind); certified RNase, DNase, DNA, and Pyrogen Free.

Manufactured of inert, chemically resistant, and exceptionally clear virgin polypropylene, this plate can withstand temperatures down to -80C and centrifugation at up to 4,000 x RCF.

 

  • Uniform wall thickness
  • Easy well identification with molded-in alpha-numeric position markings
  • Raised rims for easy and secure sealing with adhesive films, silicone mats, or heat-sealing films
  • Raised rims help protect from cross contamination

 

Item#:
AS96DPWELRWUBBTM45MM

LTS Style Filtered Pipette Tip


General Features Product Type: Pipet Tips
Number of Wells: 96
Material: Polypropylene
Color: Natural
Alphanumeric: None
Surface Treatment: None
Certified: DNase-/RNase-/Pyrogen-Free
Volumes & Dimensions Working Volume: 10ul
Performance Autoclavable: No
Max Temperature: 120C
Min Temperature: '-40C
Shipping & Handling Quantity: 96 Tips/Rack, 10 Racks/Pack, 5 Packs/Case
Case Dimensions (in.): 19 x 11 x 15.5
Case Weight (lbs.): 20.3
Item#:
ASLTSSTYFLPIPT

 
96-Deep Well Plate, Round Well, U Bottom 45mm, Glass Coated

 

This 7.20 mm round well U-bottom plate combines a 2.0 mL working volume with an automation-friendly design. Sturdy and warp-resistant design with ultra-flat surfaces and rigid construction, this plate is ideal for high throughput screening, sample collection, compound storage, screening, and combinatorial chemistry applications. It is compatible with stackers, grippers, heater/cooler blocks, and other instruments that comply with the ANSI/SLAS 2004-1 (SBS) footprint.

 

Glass-coated, polypropylene microplates. The 200 nm thick coating of silicone dioxide creates a cradle of non-binding and inert glass to protect your sample.  

 

This SiO2 coating helps to:

  • Reduced binding
  • Increase chemical resistance
  • Protect the same from any potential compounds leached from the plastic

Raised rims on each well help protect from cross-contamination, minimize sample loss during storage, and make for enhanced sealing with adhesive films, silicone mats, or heat sealing films.
 

Made from medical grade virgin polypropylene (no mold release agents or regrind); certified RNase, DNase, DNA, and Pyrogen Free.

Manufactured of inert, chemically resistant, and exceptionally clear virgin polypropylene, this plate can withstand temperatures down to -80C and centrifugation at up to 4,000 x RCF.

 

  • Uniform wall thickness
  • Easy well identification with molded-in alpha-numeric position markings
  • Raised rims for easy and secure sealing with adhesive films, silicone mats, or heat-sealing films
  • Raised rims help protect from cross contamination

 

Item#:
AS96DPWELRWUBBTM45GL

Glass Coated Plate, 96 Round Well V-Bottom 14.60mm Height, 300ul

 
Glass coated, polypropylene microplates.  The 200nm thick coating of silicone dioxide creates a cradle of non-binding and inert glass to protect your sample.  This SiO2 coating helps to:

  • Reduced binding
  • Increase chemical resistance
  • Protect the same from any potential compounds leached from the plastic.
 
The plate design:

The 96 round well V-bottom design minimizes reagent usage and provides the lowest residual volumes after pipetting (<0.1 l); designed for colorimetric assays and compound storage/ libraries, especially with automated systems.

  • Consistent automated handling – ultra-flat surfaces, sidewall gripper lugs, and rigidity
  • Durable – withstands repeated freeze/thaw cycles down to -20C without adversely affecting dimensional integrity
  • Raised rims on each well help protect from cross contamination and make for enhanced sealing with adhesive films, silicone mats, or heat sealing films.
  • Manufactured of exceptionally clear and inert virgin polypropylene (no mold release agents or regrind)
  • Certified RNase, DNase, DNA, and Pyrogen Free.

Specifications:


General Features
Volumes & Dimensions
Performance
Shipping & HandlingQuantity: 1 Plate/Pack, 10 Packs/Case, 1 Plate/Pack, 100 Packs/Case
 
Item#:
ASGC96RVB1460H300U
|◀ 37 - 43 of 43 ▶|
View: