S2K Commerce - Products Dropdown
ActionsS2K Commerce - Shopping Cart
ActionsS2K Commerce - Order Entry
Actions
96-Deep Well Plate, Square Well Top, Round U-Bottom
Â
These 96-deep well plates are ideal for separations of nucleic acids and clean-up procedures with magnetic beads. The unique square top with a round bottom design allows for maximum volume, optimum mixing, and enhanced separation/recovery of magnetic beads. Separated round well bottoms allow for the use of ring or post-style magnetic plates.
Â
Raised rims on each well make for easy and secure sealing with adhesive films, silicone mats, or heat-sealing films. Manufactured from virgin polypropylene (no mold release agents or regrind) and certified to be free of RNase, DNase, and Pyrogen contamination.
Â
- Uniform wall thickness
- Easy well identification with molded-in alpha-numeric position markings
- Raised rims for easy and secure sealing with adhesive films, silicone mats, or heat-sealing films
- Raised rims help protect from cross contamination
Plate, 96 Round Well U-Bottom, 33.00mm Height, 1.1mL
Â
Specifications:
Filtered Pipette Tips
Filtered Universal Pipet Tips, Pre-Sterilized
Glass Coated Plate, 96 Round Well U-Bottom 33.00mm Height, 1.1mL
- Reduced binding
- Increase chemical resistance
- Protect the same from any potential compounds leached from the plastic.
- Mid-height to maximize storage, utilizing 30-40% less vertical space allowing for more storage in freezers, automated loaders, under the hood, and other locations where space is at a premium
- Automation friendly design – sturdy and warp resistant with ultra-flat surfaces and rigid construction
- Stacking lugs to help prevent toppling
- Raised rims protect from cross contamination, minimize sample loss during storage, and make for enhanced sealing with adhesive films, silicone mats, or heat sealing films
- Individually Wrapped in medical grade Tyvek peel-packs
- Made from Virgin Polypropylene; no mold release agents or regrind
- RNase, DNase, DNA, and Pyrogen Free Certification
Specifications:
Â
Reservoirs, Full Heigh
8 trough full height reservoir, single well, 290mL, natural, 5 plts/pk, 10 pks/cs
Â
96-Deep Well Plate, Square Well, V-Bottom
Â
The square well pyramid-V bottom design helps maximize sample recovery. Â
These plates offer secure storage for assays, magnetic bead separations, combinatorial chemistry, compound libraries, or storing samples for any duration. Â
Â
Inert medical grade virgin polypropylene resins are ideally suited for stable, long-term high-density sample storage at -80C.
Sturdy and warp resistant with ultra-flat surfaces and rigid construction, this plate ideal for high throughput screening (HTS). Its ANSI/SLAS 1-2004 compliant footprint ensures that it will fit all standard fixtures, stackers, and heater/cooler blocks.
Â
Raised rims on each well help protect from cross-contamination, reduce sample loss in storage, and make for enhanced sealing with adhesive films, silicone mats, or heat-sealing films. Made from Virgin Polypropylene, no mold release agents or regrind; RNase, DNase, DNA, and Pyrogen Free Certification.
Mid-height to maximize storage, utilizing 30-40% less vertical space in freezers, automated loaders, under the hood, and other locations where space is at a premium. Plates have stacking lugs to help prevent toppling. The design combines optimized well volume with automation-friendly features.
Â
Â
Plate, 96 Round Well V-Bottom 14.60mm Height, 300ul
- Consistent automated handling – ultra-flat surfaces, sidewall gripper lugs, and rigidity
- Durable – withstands repeated freeze/thaw cycles down to -20C without adversely affecting dimensional integrity
- Raised rims on each well help protect from cross contamination and make for enhanced sealing with adhesive films, silicone mats, or heat sealing films.
- Manufactured of exceptionally clear and inert virgin polypropylene (no mold release agents or regrind)
- Certified RNase, DNase, DNA, and Pyrogen Free.
Â
Plate, 96 Round Well U-Bottom 14.40mm Height, 500ul
Specifications:Â
Silicone Mats, Round
Compression molded silicone sealing mats with 8.5mm diameter round plugs, are designed for 96-well storage and assay plates. Produced from the highest quality research grade silicone, they are specially designed to provide a positive and airtight seal. Mats fit tightly into wells preventing evaporation of VOCs, sample loss in storage, cross contamination, and reducing the risk of aerosols and pathogens venting during the automation process. They work in a wide range of temperatures for incubation and storage applications; especially for storage at higher temperatures or for applications involving aggressive solvents.These seals pare well with automation as-well-as manual laboratory protocols. Often used in high-throughput applications or those involving accessing the sample through the cover multiple times.
High quality silicone, resists coring and tearing reducing the risk or mat particulate entering the well. Well perforations will seal themselves, after penetration, ensuring an airtight closure. These mats are chemically resistant and reusable; containing no adhesives or extractables to contaminate samples. Made of research-grade silicone, they can be autoclaved, and following a 10% bleach wash and ethanol rinse protocol may be reused. Printed alpha numeric grid for easy reference.
Â
48-Round or Rectangle Well Plates, U Bottom
Â
Developed for large sample storage and analysis, these 3.5 mL and 4.6mL plates feature raised rims for optimized sealing, thin walls to maximize well volume, and a unique elongated bottom trough – designed to act as a reservoir for samples and sample particulate.
Â
These plates are ideal for large-volume samples and are often used in combinatorial chemistry, environmental, and food testing. Its ANSI/SLAS 1-2004 compliant footprint ensures that it will fit all standard fixtures, stackers, and heater/cooler blocks.
Manufactured from inert medical grade virgin polypropylene resins are ideally suited for stable, long-term high-density sample storage at -80ºC. Certified to be free of RNase, DNase, and Pyrogen contamination.
Â
Â
Plate, 96 Round Well V-Bottom 14.40mm Height, 480ul
Â
Specifications:
384, Square, Well
General Features | Product Type: Multi Well Plates |
Number of Wells: 384 | |
Well Shape Top: Square | |
Well Shape Bottom: Pyramid – V | |
Material: Polypropylene | |
Color: Natural | |
Alphanumeric: None | |
Compliance: ANSI/SBS 1-2004 | |
Surface Treatment: None | |
Certified: DNase-/RNase-/Pyrogen-Free | |
Volumes & Dimensions | Overall Height: 14.60mm |
Well Depth: 12.00mm | |
Overall Length: 127.5mm | |
Width: 85.35mm | |
Top Width: 81.20mm | |
Well Diameter Bottom: 2.82mm | |
Well Diameter Top: 3.60mm | |
Top Length: 123.00mm | |
Well Bottom To Deck: 1.7mm | |
Max Volume: 130ul | |
Working Volume: 120ul | |
Volume With Mat Lid: 30ul | |
Performance | Autoclavable: 121C at 15 psi, 15 min. |
Max RCF: 4,000 RCF | |
Max Temperature: 120C | |
Min Temperature: '-80C | |
Shipping & Handling | Quantity: 10 Plates/Pack, 10 Packs/Case |
Case Dimensions (in.): 17.75 x 11 x 7.5 | |
Case Weight (lbs.): 10 |