S2K Commerce - Products Dropdown
ActionsS2K Commerce - Shopping Cart
ActionsS2K Commerce - Order Entry
ActionsSilicone Mats, Square
Compression molded silicone sealing mats with 8.2 x 8.2mm square plugs, are designed for 96-square well storage and assay plates. Produced from the highest quality research grade silicone, they are specially designed to provide a positive and airtight seal. Mats fit tightly into wells preventing evaporation of VOCs, sample loss in storage, cross contamination, and reducing the risk of aerosols and pathogens venting during the automation process. They work in a wide range of temperatures for incubation and storage applications; especially for storage at higher temperatures or for applications involving aggressive solvents.These seals pare well with automation as-well-as manual laboratory protocols. Often used in high-throughput applications or those involving accessing the sample through the cover multiple times. High quality silicone, resists coring and tearing reducing the risk or mat particulate entering the well. Well perforations will seal themselves, after penetration, ensuring an airtight closure.
These mats are chemically resistant and reusable; containing no adhesives or extractables to contaminate samples. Made of research-grade silicone, they can be autoclaved, and following a 10% bleach wash and ethanol rinse protocol may be reused. Printed alpha numeric grid for easy reference.
Deep, Well, Plate, Square, Well, Top, Round/Con, V, Bottom, KingFisher
- Automation compliant footprint and rigid construction allow for use on automation platforms with most robotic grippers.
- Raised rims on each well make for easy and secure sealing with adhesive films, silicone mats, or heat sealing films.
- Made from Virgin Polypropylene; no mold release agents or regrind
- Certified to be free of RNase, DNase, and Pyrogen contamination
96-Deep Well Plate, Round Well, V-Bottom 33 mm
These round deep-well V-bottom plates combine working volume with an automation-friendly design. Sturdy and warp-resistant design with ultra-flat surfaces and rigid construction, this plate is ideal for high throughput screening, sample collection, compound storage, screening, and combinatorial chemistry applications. It is compatible with stackers, grippers, heater/cooler blocks, and other instruments that comply with the ANSI/SLAS 2004-1 (SBS) footprint.
Raised rims on each well help protect from cross-contamination, minimize sample loss during storage, and make for enhanced sealing with adhesive films, silicone mats, or heat-sealing films. Manufactured of inert, chemically resistant, and exceptionally clear virgin polypropylene.
Made from medical grade virgin polypropylene (no mold release agents or regrind); certified RNase, DNase, DNA, and Pyrogen Free.
- Uniform wall thickness
- Easy well identification with molded-in alpha-numeric position markings
- Raised rims for easy and secure sealing with adhesive films, silicone mats, or heat-sealing films
- Raised rims help protect from cross contamination
Silicone Sealing Mats for PCR
PCR Silicone Sealing Mat, 96-well, “-” perforated; with printed alphanumeric. Packaged 10 Mats per bag, 5 bags per cas
Reservoirs, Half Height
Combine space savings with automation friendly design, with this
sturdy 12-channel reservoir. This reservoir is ideal for manual or
automated applications with its warp resistant, ultra-flat, rigid
construction, and stable base. It is compatible with stackers, plate
handlers, cooling blocks, and other instruments that comply with the
ANSI/SLAS 2004-1 (SBS) footprint.
The 12 channel design allows for the use of up to 12 different reagents. Each channel has a “v shaped” trough to reduce dead volume – minimizing reagent waste. This reservoir is designed to take a range of liquid handling configurations from 8 or 12 channel pipettes. Overall volume is 160mL; each channel can hold up to 13.3mL.
Mid-height design utilizes 30-40% less vertical space allowing for more storage in freezers, automated loaders, under the hood, and other locations where space is at a premium. To minimize space on platforms (when a stacker is not in use) or under hoods, these reservoirs can be filled and stacked.
Sturdy and reusable, our reagent reservoirs can stand-up to autoclaving, exposure to temperature extremes, and most chemicals, solvents and alcohols used in combinatorial chemistry.
- Autoclavable
- Storage down to -80°C
- Made from Virgin Polypropylene; no mold release agents or regrind
- RNase, DNase, DNA, and Pyrogen Free Certification
96-Deep Well Plate, Round Well, V-Bottom, 33 mm Glass Coated
These round deep-well V-bottom glass-coated plates combine working volume with an automation-friendly design. Sturdy and warp-resistant design with ultra-flat surfaces and rigid construction, this plate is ideal for high throughput screening, sample collection, compound storage, screening, and combinatorial chemistry applications. It is compatible with stackers, grippers, heater/cooler blocks, and other instruments that comply with the ANSI/SLAS 2004-1 (SBS) footprint.
Raised rims on each well help protect from cross-contamination, minimize sample loss during storage, and make for enhanced sealing with adhesive films, silicone mats, or heat-sealing films. Manufactured of inert, chemically resistant, and exceptionally clear virgin polypropylene.
Made from medical grade virgin polypropylene (no mold release agents or regrind); certified RNase, DNase, DNA, and Pyrogen Free.
- Uniform wall thickness
- Easy well identification with molded-in alpha-numeric position markings
- Raised rims for easy and secure sealing with adhesive films, silicone mats, or heat-sealing films
- Raised rims help protect from cross contamination
PCR Plates
Standard profile, PCR plate with no skirt. This universal plate design is compatible with all standard 0.2mL block thermal cyclers. Plate is easily oriented with corner notch and molded in alpha-numeric.
Manufactured of low extractable, optically clear, virgin, medical grade polypropylene specifically for the rigorous demands of the research laboratory. Uniformly thin-walls promote rapid even thermal transfer for consistent amplification and increased recovery rate.
Plates are thin, flexible, and easy to cut. Raised rims on each well help protect from cross contamination, minimize sample loss during storage, and make for enhanced sealing with adhesive films, silicone mats, or heat-sealing films.
Surface Treatment: None
Matching silicone cap mats: PCMATR-9-PRT
Volume with Mat: n/a
Plates are packaged and sold 50 per case (5 bags of 10 plates each)
Made from ultra-clear research grade silicone; no mold release agents
RNase, DNase, DNA, PCR inhibitor free, and Pyrogen Free Certification200ul 96-well, no-skirt, PCR Amplification Plate, PP, Natural
10 Plates per Bag, 5 Bags per case
96-Deep Well Plate, Square Well Top, Round U-Bottom
These 96-deep well plates are ideal for separations of nucleic acids and clean-up procedures with magnetic beads. The unique square top with a round bottom design allows for maximum volume, optimum mixing, and enhanced separation/recovery of magnetic beads. Separated round well bottoms allow for the use of ring or post-style magnetic plates.
Raised rims on each well make for easy and secure sealing with adhesive films, silicone mats, or heat-sealing films. Manufactured from virgin polypropylene (no mold release agents or regrind) and certified to be free of RNase, DNase, and Pyrogen contamination.
- Uniform wall thickness
- Easy well identification with molded-in alpha-numeric position markings
- Raised rims for easy and secure sealing with adhesive films, silicone mats, or heat-sealing films
- Raised rims help protect from cross contamination
Plate, 96 Round Well U-Bottom, 33.00mm Height, 1.1mL
Specifications:
Filtered Pipette Tips
Filtered Universal Pipet Tips, Pre-Sterilized
Glass Coated Plate, 96 Round Well U-Bottom 33.00mm Height, 1.1mL
- Reduced binding
- Increase chemical resistance
- Protect the same from any potential compounds leached from the plastic.
- Mid-height to maximize storage, utilizing 30-40% less vertical space allowing for more storage in freezers, automated loaders, under the hood, and other locations where space is at a premium
- Automation friendly design – sturdy and warp resistant with ultra-flat surfaces and rigid construction
- Stacking lugs to help prevent toppling
- Raised rims protect from cross contamination, minimize sample loss during storage, and make for enhanced sealing with adhesive films, silicone mats, or heat sealing films
- Individually Wrapped in medical grade Tyvek peel-packs
- Made from Virgin Polypropylene; no mold release agents or regrind
- RNase, DNase, DNA, and Pyrogen Free Certification
Specifications:
Reservoirs, Full Heigh
8 trough full height reservoir, single well, 290mL, natural, 5 plts/pk, 10 pks/cs