IBI Cell Culture Grade, Pyrogen/Endotoxin Free Water is prepared for nuclear transfer, transfection, transformation, cell and tissue culture,
LAL testing, and all other aqueous solution preparations that require stringent quality control.

IBI Cell Culture Grade Water is tested for use in critical assays and applications. The water is endotoxin-free (to the maximum detection
limit of <0.005EU/ml by turbidimetric assay). The purification process of our Cell Culture Grade Water includes distillation, continuous
deionization, reverse osmosis, 0.1µm filtration, followed by steam sterilization in an autoclave.

Sodium Phosphate Dibasic, Heptahydrate

• Appearance: White to Off-White Powder
• Purity: ≥ 99.0%
• pH (5% Aqueous) : 8.7 - 9.3
• Solubility: Clear and Colorless
• Identity (FTIR): Conforms to Structure
• Loss on Drying (105°C/4 h): 44 - 50%
• Lead: ≤ 10 ppm
• Iron: ≤ 10 ppm
• Chloride: ≤ 10 ppm
• Phosphate: 35.0% - 39.-%
• Sulfate: ≤ 50 ppm
• RNase: None Detected
• DNase: None Detected

*Custom sizes available upon request.

DOT Information: Non-regulated.   
 

• RNase & DNase Free Water A new process of purifying large quantity of DNase and RNase free water enables us to offer Molecular Grade Water at a price that any laboratory can afford. 
  
  
• No toxic agents such as DEPC are used in making the Molecular Grade Water; therefore, there is no chance of DEPC interfering with enzymatic reactions. 
  
  
• The Molecular Grade Water is suitable for use in molecular biology applications which demand a high quality of water and assurance that the water is free from DNase and RNase contamination. 
  
  
• Molecular Grade Water can be used for making reagents and rinsing glass/plastic wares for DNA and RNA research. 
  
  
• Each lot is quality tested for the absence of RNase and DNase contamination. Test reports are attached with each container as an added assurance.

Sodium Phosphate Monobasic, Anhydrous

• Appearance (Color): White to Off-White
• Appearance (Form): Crystalline Powder
• Purity: 98.0 - 103.0%
• pH (5% Aqueous): 4.1 - 4.5
• Solubility: Clear and colorless
• Identity (FTIR): Conforms to Structure
• Loss on Drying (105°C/4h): ≤ 0.5%
• Insoluble Matter: ≤ 2.0%
• Lead: ≤ 5 ppm
• Arsenic: ≤ 3 ppm
• Fluoride: ≤ 50 ppm
• Phosphorous: 24.5 - 26.5%
• RNase: None Detected
• DNase: None Detected

*Custom sizes available upon request.

DOT Information: Non-regulated.
 

Sucrose

• Appearance (Color): White
• Appearance (Form): Crystalline Powder
• Purity: ≥ 99.0%
• Identity (FTIR): Conforms to Structure
• Solubility (1M Aqueous): Clear and Colorless
• pH (1M Aqueous): 5.5 - 7.5
• Conductivity (1M Aqueous): ≤ 35 uS / cm
• Specific Rotation: 65.5° to 67.5°
• Water: ≤ 0.2%
• A260 (1M Aqueous): ≤ 0.09
• A280 (1M Aqueous): ≤ 0.07
• RNase: None Detected
• DNase: None Detected

*Custom sizes available upon request.

DOT Information: Non-regulated.

Tris Base

• Appearance: White, Crystalline Powder
• Purity: ≥ 99.5%
• pH (5% Aqueous): 10.0 - 11.5
• Solubility (40% Aqueous): Clear and Colorless
• Identity (FTIR): Conforms to Structure: ≤ 0.5%
• Loss on Drying (105°C/4h): ≤ 0.5%
• Melting Point: 168ºC – 172ºC
• A280 (40% Aqueous): ≤ 0.07
• A400 (40% Aqueous): ≤ 0.02
• Lead: ≤ 5 ppm
• Iron: ≤ 5 ppm
• Chloride: ≤ 3 ppm
• Sulfate: ≤ 10 ppm
• RNase: None Detected
• DNase: None Detected

*Custom sizes available upon request.

DOT Information: Non-regulated.   
 

Sodium Sulfate

• Appearance: White Crystalline Powder
• Purity: ≥ 99.0%
• pH (5% Aqueous): 5.2 - 9.2
• Identification (FTIR): Conforms to Structure
• Water: ≤ 0.5%
• Insoluble Matter: ≤ 0.01%
• Loss on Ignition: ≤ 0.05%
• Chloride: ≤ 10 ppm
• Nitrogen: ≤ 5 ppm
• Phosphate: ≤ 10 ppm
• Lead: ≤ 5 ppm
• Iron: ≤ 10 ppm
• DNase: None Detected
• RNase: None Detected

*Custom sizes available upon request.

DOT Information: Non-regulated.   
 

Pall® Ampoule Media for Microbiological Analysis

• Sterile Ampoule Media Pre-Measured for Maximum Efficiency and Convenience
• Meets Membrane Filter (MF) Technique Standard Method requirements with 2 mL ampoules*
• Maximizes efficiency with premixed and presterilized media
• Choose between plastic or glass ampoules for your applications
• Simplify pouring of the media with wide-mouth glass ampoules
• All plastic ampoule media is economically packaged with 50 ampoules per box

Sodium Chloride

• Appearance: White Crystalline Powder
• Purity: 99.0 - 101.5%
• pH (5% Aqueous): 5.0 - 9.0
• Lead: ≤ 5 ppm
• Iron: ≤ 2 ppm
• Insoluble Matter: ≤ 0.005%
• Iodide: ≤ 20 ppm
• Bromide: ≤ 100 ppm
• Phosphate: ≤ 5 ppm
• Sulfate: ≤ 40 ppm
• Barium: To Pass Test
• Calcium: ≤ 20 ppm
• Magnesium: ≤ 10 ppm
• Potassium: ≤ 50 ppm
• Chlorate & Nitrate: ≤ 30 ppm
• RNase: None Detected
• DNase: None Detected

*Custom sizes available upon request.

DOT Information: Non-regulated.   
 

EDTA Disodium Salt

• Appearance: White Crystalline Powder
• Purity: ≥ 99.0%
• pH (5% Aqueous): 4.0 - 6.0
• Solubility: Clear and Colorless to Faint Yellow
• Identification (FTIR): Conforms to Structure
• Loss on Drying: 1.0%
• Insoluble Matter: ≤ 0.005%
• Nitriloacetic Acid: ≤ 0.1%
• Lead: ≤ 5 ppm
• Iron: 10 ppm
• DNase: None Detected
• RNase: None Detected

*Custom sizes available upon request.

DOT Information: Non-regulated.   
 

Sodium Dodecyl Sulfate

• Appearance: White Powder
• Purity: ≥ 98.0%
• Active Matter: ≥ 99%
• Identity (FTIR): Conforms to Structure
• Lead: ≤ 5 ppm
• Phosphate: ≤ 1ppm
• A260 (3% Aqueous): ≤ 0.4
• A280 (3% Aqueous): ≤ 0.1
• RNase: None Detected
• DNase: None Detected

*Custom sizes available upon request.

DOT Information: Non-regulated.   
 

EZ Pack™ Agarose Tablets

• Eliminates weighing
• Fast dissolving, just two minutes
• Environmentally friendly, free from organic solvents
• Consistent, reproducible gels
• Enhanced resolution and clarity 

Researchers trust Benchmark’s Agarose LE to meet their electrophoretic needs for various applications. Now, the same agarose is available in a convenient, no-mess tablet.

Agarose LE is refined in an advanced process that excludes the use of organic solvents. The result is a cleaner end product with significantly reduced environmental impact. The agarose can be used for analyses of nucleic acids from 150 bp to 25,000 bp, protein electrophoresis, and various blotting protocols.

The low EEO of the agarose promotes increased electrophoretic mobility, yielding improved resolution and shorter run times. This also allows macromolecules and larger particles (subcellular fragments, viruses, etc.) to migrate more freely through the gel matrix. The consistently low EEO reduces band distortion (caused by counterflow) that can result from the presence of excessive sulfate-rich negative ions. The quick-dissolving EZ Pack™ tablet contains 0.5 g (500 mg) of Agarose LE, eliminating the hands-on time and inaccuracies normally associated with weighing. Use of the tablet is not only convenient and cleaner, but it also provides better consistency and reproducibility gel to gel.

Gel preparation is simple – add the desired number of tablets to the electrophoresis buffer, allow it to sit for two minutes, and then heat and pour as usual. The resulting gels are highly transparent, have exceptional thermal stability (ensuring safe and easy handling), and exhibit exceptionally low absorption of chemical staining agents.

EZ Pack™ Agarose Tablets are supplied in convenient blister packs for safe, clean dispensing.

Specifications
 

Gel Temperature	36°C ± 1.5°C (1.5%)
Melt Temperature	88°C ± 1.5°C (1.5%)
EEO (-mr)	< 0.13
Moisture Content	< 10%
Sulfate	< 0.2%
RNase/DNase	None Detected
Protease/Endonuclease	None Detected
Storage Conditions	Room Temperature
Gel Strength	> 1200 g / cm2 (1%) > 2500 g / cm2 (1.5%)

 

Buffer volume required to achieve desired gel strength
GEL %	0.8%	1.0%	1.2%	1.3%	1.5%	1.8%	2.0%
1 Tab	63 mL	50 mL	42 mL	38 mL	33 mL	28 mL	25 mL
2 Tabs	125 mL	100 mL	83 mL	77 mL	67 mL	56 mL	50 mL
3 Tabs	188 mL	150 mL	125 mL	115 mL	100 mL	83 mL	75 mL