Bullet Blender® 50-DX

Our largest homogenizer DX can process tissue samples up to 3.5 g or cell culture combined with beads up to 20 mL. Process up to 4 tough tissue samples or up to 8 soft samples in 50 mL tubes in parallel. With Air Cooling™ technology to minimize heat build up. Available with CE certification.

Includes:

• Bullet Blender 50-DX
• Operator’s Manual
• 12V DC Wall plug power supply (UL/CE)
• Basic starter kit which includes:
• Bead Sample Pack contains several different types of beads
• Spoon for dispensing beads
• Sample pack of 50 mL TPP brand tubes

Features:

• Air Cooling™ prevents samples from heating up when processing multiple rounds. The COOLEST homogenizer available!
• Compact
• The footprint is only 13in. (33cm) wide by 15in. (38cm) deep.
• High Throughput
• Homogenize 8 samples at one time.
• User friendly
• Only 2 settings to select: time and speed (intensity).
• The time of the run may be adjusted from 3-15 minutes
• Automatic stop after time is up.
• 10 speeds
• Permits gentle vortexing to vigorous homogenization.
• User friendly interface.
• Versatile
• Compatible in temperatures ranging from 4-60°C (avoid condensation, which may damage electronics and void the warranty).
• Requires only an electrical outlet for operation.
• CE certified 12V power supply, shipped with the proper plug configuration for domestic or international outlets.

Bullet Blender® 24 Gold 
 
The most powerful homogenizer just got better. The Bullet Blender Gold for tougher tissue/cell samples such as mouse femur, tumor and skin, now is dry ice compatible and hence eliminates sample heating during homogenzation. Process up to 24 samples at a time. Available with CE certification.

Includes:

• Bullet Blender 24 Gold
• Operator’s Manual
• Basic starter kit which includes:
• Bead Sample Pack contains samples of eight different bead types.
• Spoon for dispensing beads
• Sample pack of Eppendorf Safe-lock tubes

Specifications:

• Capacity: Up to 24 x 1.5 mL snap-cap Eppendorf®Safe-Lock tubes or RINO™ screw cap tubes
• Maximum recommended sample size: 300 mg
• Maximum fill volume (including beads and buffer): 1.2 mL
• Dry ice cooling system: Fill compartment on the side of the instrument with dry ice to keep the inside of the instrument at 4°C. A light will come on to notify the user when the inside of the instrument reaches 4°C
• Sound insulation allows for quiet homogenization

Features:

• Dry Ice compartment
• Prevents samples from heating up when processing multiple rounds. The COOLEST homogenizer available!
• Compact
• The footprint is only 22 in. (56 cm) wide x 15 in. (38 cm) deep x 15 in. (28 cm) high
• High Throughput
• Homogenize 24 samples at one time
• User friendly

• 8 speed settings easily selectable from a front-panel control. The wide array of speeds allows the Bullet Blender to be used for gentle vortexing, vigorous homogenization, or anything in between
• 6 time settings- 15 seconds, 30 seconds, 1 minutes, 2 minutes, 3 minutes, 4 minutes and 5 minutes
• The Bullet Blender will automatically stop after the selected time is up

• Versatile

• Relative Humidity: 5- 90% non-condensing
• Power Requirement: 100-240V~ 4.5-2.5A, 50/60Hz
• Can be used in temperatures ranging from 4°C to 40°C. Altitude: <2000 m
• Storage Temperature: -40°C to 50°C

• Requires only an electrical outlet for operation
• 12V power supply, shipped with the proper plug configuration for domestic or international outlets; CE certification available (BB24-AU-CE)

Bullet Blender® 5 Storm

The Bullet Blender Blue 5 was designed to process medium sized samples up to 1 g in mass. This instrument can also handle samples as small as 100 mg. Process up to 12 samples at a time in 5ml screw-cap tubes. With Air Cooling™ technology to minimize heat build up. Available with CE certification.

Includes:

• Bullet Blender 5 Storm
• Operator’s Manual
• 24V DC Wall plug power supply (UL/CE)
• Basic starter kit which includes:
• Bead Sample Pack contains seven different bead types
• Spoon for dispensing beads
• Sample pack of 5 mL Axygen screw-cap tubes

Features:

• Air Cooling™ prevents samples from heating up when processing multiple rounds. The COOLEST homogenizer available!
• Compact
• The footprint is only 9 in. (22 cm) wide by 11 in. (28 cm) deep.
• High Throughput
• Homogenize 12 samples at one time.
• User friendly
• Only 2 settings to select: time and speed (intensity).
• The time of the run may be adjusted from 1-5 minutes
• Automatic stop after time is up.
• 10 speeds
• Permits gentle vortexing to vigorous homogenization.
• User friendly interface.
• Versatile
• Compatible in temperatures ranging from 4-60°C (avoid condensation, which may damage electronics and void the warranty).
• Requires only an electrical outlet for operation.
• CE certified 24V power supply, shipped with the proper plug configuration for domestic or international outlets.

Bullet Blender® 5 Gold

• Homogenization of up to 12 samples from 100 mg - 1 g (100 µl - 1 mL for plant tissue, insects and cell culture) in 5 mL centrifuge tubes
• Range of speeds allows for gentle vortexing, vigorous homogenization, or anything in between
• Can be used in temperatures ranging from 4°C to 40°C*
• With 4°C Cooling™
• Made in the USA

*avoid condensation, which will damage electronics and void the warranty

The BULLET BLENDER® enables you to homogenize, disrupt, or lyse up to 24 tissue or cell culture samples at a time. Load the samples into standard polypropylene tubes, then place them in the BULLET BLENDER. The "bullets" in the instrument vigorously strike all of the tubes and homogenize your sample in minutes. 

Includes:

• Bullet Blender 5 Gold
• Operator’s Manual
• Power supply
• Basic starter kit which includes:
• Bead Sample Pack contains centrifuge tubes of several different types of beads
• Spoon for dispensing beads
• Sample pack of 5 mL Eppendorf tubes

Consistent and High Yield Results

The BULLET BLENDER homogenizer prepares up to 24 samples in just minutes. All of the samples are automatically homogenized in the same manner, with high yields, so there is very little variation from sample to sample.

No Cross-Contamination or Sample Loss

There are no probes or blades to cause cross contamination or sample loss, which also means there are no parts to clean between runs. The sample tubes are kept closed and self-contained during homogenization.

Samples Stay COOL

No cool down required. The Bullet Blender homogenizers use very little power due to the unique, patented design. There is very little heating of the samples because the sample tubes vibrate vigorously in air, keeping them cool, rather than being subjected to frictional heating as the tubes rub against the walls of a holder. Also, because the motor does not need to agitate any heavy platforms or plates, it is small and will last for many years.

So Easy To Use

Simply place your sample, beads and buffer in standard tubes, and load the tubes into the BULLET BLENDER homogenizer. Tune the extent of disruption by adjusting the run time and speed. Afterwards, place the sample tubes in a centrifuge to separate the lysate. No special holders are needed. There are no clamp plates or locking rings to fiddle with.

Risk Free Purchase

BULLET BLENDER homogenizers come with a 30 day money back guarantee and a 2 year warranty. The simple, reliable design enables the BULLET BLENDER to sell for one half the price of other agitation based instruments, yet provides an easier, quicker, cooler technique.

Bullet Blender® 50 Gold

Our largest dry-ice cooled homogenizer can process tissue samples up to 3.5 g or cell culture combined with beads up to 20 mL. Process up to 4 tough tissue samples or up to 8 soft samples in 50 mL tubes in parallel. Available with CE certification.

Includes:

• Bullet Blender 50 Gold
• Operator’s Manual
• Power supply
• Basic starter kit which includes:
• Bead Sample Pack contains centrifuge tubes of several different types of beads
• Spoon for dispensing beads
• Sample pack of 50 mL TPP brand tubes

Specifications:

• Capacity: Up to 8 x 50 mL screw-cap Axygen® or Corning® brand self-standing plug-seal cap tubes.

• Maximum recommended sample size: 3.5 mg.

• Maximum fill volume (including beads and buffer): 20 mL.

• Dry ice cooling system: Fill compartment on the side of the instrument with dry ice to keep the inside of the instrument at 4°C. A light will come on to notify the user when the inside of the instrument reaches 4°C.

• Sound insulation allows for quiet homogenization.

Features:

• Dry Ice compartment
• Prevents samples from heating up when processing multiple rounds. The COOLEST homogenizer available!
• Compact
• The footprint is only 22 in. (56 cm) wide x 15 in. (38 cm) deep x 15 in. (28 cm) high
• High Throughput
• Homogenize 8 samples at one time.
• User friendly
• 8 speed settings easily selectable from a front-panel control. The wide array of speeds allows the Bullet Blender to be used for gentle vortexing, vigorous homogenization, or anything in between.
• 7 time settings- 1 minutes, 2 minutes, 3 minutes, 6 minutes, 9 minutes, 12 minutes and 15 minutes.
• The Bullet Blender will automatically stop after the selected time is up.

• Versatile
• Relative Humidity: 5- 90% non-condensing.
• Power Requirement: 100-240V~ 4.5-2.5A, 50/60Hz.
• Can be used in temperatures ranging from 4°C to 40°C. Altitude: <2000m.
• Storage Temperature: -40°C to 50°C.
• Requires only an electrical outlet for operation.
• CE certified 12V power supply, shipped with the proper plug configuration for domestic or international outlets.