96-well white frame tissue culture-treated (TC-treated) microplate with clear wells for radiometric and luminescence assays. The clear bottom enables bottom-reading measurements and microscopic visualization of cells.

AlphaPlates are light gray microplates specially designed to reduce crosstalk in AlphaLISA and AlphaScreen assays. Available in 384- and 1536-well formats and as a shallow-well 384-well plate.

Glass Coated Plate, 96 Round Well U-Bottom 14.40mm Height, 500ul

Plate, 96 Round Well U-Bottom 43.90mm Height, 1.6m

 
96-Deep Well Plate, Round Well, U Bottom 45mm

This 8 mm round well U-bottom plate combines working volume with automation friendly design. Sturdy and warp-resistant design with ultra-flat surfaces and rigid construction, this plate is ideal for high throughput screening, sample collection, compound storage, screening, and combinatorial chemistry applications. It is compatible with stackers, grippers, heater/cooler blocks, and other instruments that comply with the ANSI/SLAS 2004-1 (SBS) footprint.

Raised rims on each well help protect from cross-contamination, minimize sample loss during storage, and make for enhanced sealing with adhesive films, silicone mats, or heat sealing films.
Made from medical grade virgin polypropylene (no mold release agents or regrind); certified RNase, DNase, DNA, and Pyrogen Free.

Manufactured of inert, chemically resistant, and exceptionally clear virgin polypropylene, this plate can withstand temperatures down to -80C and centrifugation at up to 4,000 x RCF.

• Uniform wall thickness
• Easy well identification with molded-in alpha-numeric position markings
• Raised rims for easy and secure sealing with adhesive films, silicone mats, or heat-sealing films
• Raised rims help protect from cross contamination

 
96-Deep Well Plate, Round Well, U Bottom 45mm, Glass Coated

This 7.20 mm round well U-bottom plate combines a 2.0 mL working volume with an automation-friendly design. Sturdy and warp-resistant design with ultra-flat surfaces and rigid construction, this plate is ideal for high throughput screening, sample collection, compound storage, screening, and combinatorial chemistry applications. It is compatible with stackers, grippers, heater/cooler blocks, and other instruments that comply with the ANSI/SLAS 2004-1 (SBS) footprint.

Glass-coated, polypropylene microplates. The 200 nm thick coating of silicone dioxide creates a cradle of non-binding and inert glass to protect your sample.  

This SiO2 coating helps to:

• Reduced binding
• Increase chemical resistance
• Protect the same from any potential compounds leached from the plastic

Raised rims on each well help protect from cross-contamination, minimize sample loss during storage, and make for enhanced sealing with adhesive films, silicone mats, or heat sealing films.
 
Made from medical grade virgin polypropylene (no mold release agents or regrind); certified RNase, DNase, DNA, and Pyrogen Free.

Manufactured of inert, chemically resistant, and exceptionally clear virgin polypropylene, this plate can withstand temperatures down to -80C and centrifugation at up to 4,000 x RCF.

• Uniform wall thickness
• Easy well identification with molded-in alpha-numeric position markings
• Raised rims for easy and secure sealing with adhesive films, silicone mats, or heat-sealing films
• Raised rims help protect from cross contamination

Glass Coated Plate, 96 Round Well V-Bottom 14.60mm Height, 300ul

SILICONE SEALING MATS

• Produced from the highest quality research grade silicone, they are specially designed to provide a positive and airtight seal. 
• Mats fit tightly into wells preventing evaporation.
• Pare well with automation as-well-as manual laboratory protocols. 
• High quality silicone, resists coring and tearing reducing the risk or mat particulate entering the well. 
• Well perforations will seal themselves, after penetration, ensuring an airtight closure.
• Made of research-grade silicone, they can be autoclaved, and following a 10% bleach wash and ethanol rinse protocol may be reused.
• Printed alpha numeric grid for easy reference.
• RNase, DNase, DNA, and Pyrogen Free Certification
• Temperature Range: -40C to 80C

This product is no longer available.

For a different Silicone Sealing Mats, visit here.

 

Silicone Sealing Mat for 96 plates

• Made of research-grade silicone
• Scored wells for sample access
• Perforations re-seal after access
• Resists coring and tearing
• Eliminates cross-talk between wells
• Also works as a compression mat
• Suitable for standard PCR thermocycling
• Mats can be reused
• For use with 96-well PCR plates
• Printed alpha numeric grid for easy reference
• Certified to be free of RNase, DNase, DNA, PCR inhibitors, and Pyrogen contamination.

Works as a plate seal (to eliminate cross contamination) and compression mat all-in-one!

Our compression molded 96-round plug, silicone sealing mats for PCR plates minimize sample evaporation in a wide range of temperatures. These mats are chemically resistant and reusable; containing no adhesives or extractables to contaminate samples.  Made of research-grade silicone, they can be autoclaved, and following a 10% bleach wash and ethanol rinse protocol may be reused.

Limited volume inserts are available in either glass or polypropylene and both conical and flat bottom varieties. For inserts with polymer bottom spring, the spring acts as a shock absorber that protects against breakage if the needle bottoms out. The conical inserts permit complete sample removal.

• Unique design offers users a leakproof fit with ony one-half turn of a cap.
• Nominal Volume Of 7ml
• Ideal For Sample Storage
• Vials Are Autoclavable
• Compatible With All Major Liquid Scintillation Counting Systems
• Dimpled Bottoms To Facilitate Filter-Paper Counting