384, Square, Well

AlphaPlates are light gray microplates specially designed to reduce crosstalk in AlphaLISA and AlphaScreen assays. Available in 384- and 1536-well formats and as a shallow-well 384-well plate.

PCR Tube

Individual tubes with attached domed caps minimize evaporation especially when used with small sample volumes, in thermal cyclers with heated lids, or older units.  Achieve even and precise thermal transfer while minimizing evaporation with our 0.2ml, attached dome cap tubes.  The domed cap design is to assist condensate to re-enter the reaction mixture and gain contact with heated lids for improved heat transfer.

Precision molded as a single part creates parts with uniform fit and reduce sample evaporation.  Tubes with attached caps are regularly quality tested for evaporation rates and must exhibit less than 3% sample loss.

Individual tube volumes

Recommended for low throughput applications, these tubes are designed to fit all standard 0.2mL block thermal cyclers.  Each tube is joined to a cap, their thin and consistent wall thickness optimizes heat transfer to maximize yield.

Packaged in resealable bags

All ILP PCR products are non-sterile and certified to be free of detectable RNase, DNases, DNA, and pyrogen contamination.

Glass Coated Plate, 96 Round Well U-Bottom 14.40mm Height, 500ul

Plate, 96 Round Well U-Bottom 43.90mm Height, 1.6m

 
96-Deep Well Plate, Round Well, U Bottom 45mm

This 8 mm round well U-bottom plate combines working volume with automation friendly design. Sturdy and warp-resistant design with ultra-flat surfaces and rigid construction, this plate is ideal for high throughput screening, sample collection, compound storage, screening, and combinatorial chemistry applications. It is compatible with stackers, grippers, heater/cooler blocks, and other instruments that comply with the ANSI/SLAS 2004-1 (SBS) footprint.

Raised rims on each well help protect from cross-contamination, minimize sample loss during storage, and make for enhanced sealing with adhesive films, silicone mats, or heat sealing films.
Made from medical grade virgin polypropylene (no mold release agents or regrind); certified RNase, DNase, DNA, and Pyrogen Free.

Manufactured of inert, chemically resistant, and exceptionally clear virgin polypropylene, this plate can withstand temperatures down to -80C and centrifugation at up to 4,000 x RCF.

• Uniform wall thickness
• Easy well identification with molded-in alpha-numeric position markings
• Raised rims for easy and secure sealing with adhesive films, silicone mats, or heat-sealing films
• Raised rims help protect from cross contamination

LTS Style Filtered Pipette Tip

 
96-Deep Well Plate, Round Well, U Bottom 45mm, Glass Coated

This 7.20 mm round well U-bottom plate combines a 2.0 mL working volume with an automation-friendly design. Sturdy and warp-resistant design with ultra-flat surfaces and rigid construction, this plate is ideal for high throughput screening, sample collection, compound storage, screening, and combinatorial chemistry applications. It is compatible with stackers, grippers, heater/cooler blocks, and other instruments that comply with the ANSI/SLAS 2004-1 (SBS) footprint.

Glass-coated, polypropylene microplates. The 200 nm thick coating of silicone dioxide creates a cradle of non-binding and inert glass to protect your sample.  

This SiO2 coating helps to:

• Reduced binding
• Increase chemical resistance
• Protect the same from any potential compounds leached from the plastic

Raised rims on each well help protect from cross-contamination, minimize sample loss during storage, and make for enhanced sealing with adhesive films, silicone mats, or heat sealing films.
 
Made from medical grade virgin polypropylene (no mold release agents or regrind); certified RNase, DNase, DNA, and Pyrogen Free.

Manufactured of inert, chemically resistant, and exceptionally clear virgin polypropylene, this plate can withstand temperatures down to -80C and centrifugation at up to 4,000 x RCF.

• Uniform wall thickness
• Easy well identification with molded-in alpha-numeric position markings
• Raised rims for easy and secure sealing with adhesive films, silicone mats, or heat-sealing films
• Raised rims help protect from cross contamination

Glass Coated Plate, 96 Round Well V-Bottom 14.60mm Height, 300ul

As of 06/26/23 The items below are being discontinued and will no longer be available when existing supplies are exhausted.

3914-845-000-9 | PurePlus^® Cap Strips for 1.2 mL Sample Library Tube, In Strips of 12, Sterile

PurePlus^® Sample Library Tubes

• ATP, RNase/DNase, and Endotoxin Free (non-pyrogenic)
• Freezable (-80°C)
• Autoclavable (122°C, 15 minutes)
• Made of polypropylene

PurePlus^® Sample Library Tubes are designed for long-term specimen storage. Caps and tubes come in different packages. Separate closures strips are available. 96 tube format with printed alphanumeric grid and a clear lid.

Library tubes available as: Individual tubes, 8-well, and 12-well tube strips.
 
 

All racked tubes include rack lids. Tube closures are sold separately

Specifications 

SILICONE SEALING MATS

• Produced from the highest quality research grade silicone, they are specially designed to provide a positive and airtight seal. 
• Mats fit tightly into wells preventing evaporation.
• Pare well with automation as-well-as manual laboratory protocols. 
• High quality silicone, resists coring and tearing reducing the risk or mat particulate entering the well. 
• Well perforations will seal themselves, after penetration, ensuring an airtight closure.
• Made of research-grade silicone, they can be autoclaved, and following a 10% bleach wash and ethanol rinse protocol may be reused.
• Printed alpha numeric grid for easy reference.
• RNase, DNase, DNA, and Pyrogen Free Certification
• Temperature Range: -40C to 80C