PCR Plates

Standard profile, PCR plate with no skirt. This universal plate design is compatible with all standard 0.2mL block thermal cyclers. Plate is easily oriented with corner notch and molded in alpha-numeric.

Manufactured of low extractable, optically clear, virgin, medical grade polypropylene specifically for the rigorous demands of the research laboratory. Uniformly thin-walls promote rapid even thermal transfer for consistent amplification and increased recovery rate.

Plates are thin, flexible, and easy to cut. Raised rims on each well help protect from cross contamination, minimize sample loss during storage, and make for enhanced sealing with adhesive films, silicone mats, or heat-sealing films.

Surface Treatment: None

Matching silicone cap mats: PCMATR-9-PRT

Volume with Mat: n/a

Plates are packaged and sold 50 per case (5 bags of 10 plates each)

Made from ultra-clear research grade silicone; no mold release agents

RNase, DNase, DNA, PCR inhibitor free, and Pyrogen Free Certification200ul 96-well, no-skirt, PCR Amplification Plate, PP, Natural

10 Plates per Bag, 5 Bags per case

96-Deep Well Plate, Square Well Top, Round U-Bottom

These 96-deep well plates are ideal for separations of nucleic acids and clean-up procedures with magnetic beads. The unique square top with a round bottom design allows for maximum volume, optimum mixing, and enhanced separation/recovery of magnetic beads. Separated round well bottoms allow for the use of ring or post-style magnetic plates.

Raised rims on each well make for easy and secure sealing with adhesive films, silicone mats, or heat-sealing films. Manufactured from virgin polypropylene (no mold release agents or regrind) and certified to be free of RNase, DNase, and Pyrogen contamination.

• Uniform wall thickness
• Easy well identification with molded-in alpha-numeric position markings
• Raised rims for easy and secure sealing with adhesive films, silicone mats, or heat-sealing films
• Raised rims help protect from cross contamination

Plate, 96 Round Well U-Bottom, 33.00mm Height, 1.1mL

Filtered Pipette Tips

Glass Coated Plate, 96 Round Well U-Bottom 33.00mm Height, 1.1mL

Reservoirs, Full Heigh

 
96-Deep Well Plate, Square Well, V-Bottom

The square well pyramid-V bottom design helps maximize sample recovery.  

These plates offer secure storage for assays, magnetic bead separations, combinatorial chemistry, compound libraries, or storing samples for any duration.  

Inert medical grade virgin polypropylene resins are ideally suited for stable, long-term high-density sample storage at -80C.

Sturdy and warp resistant with ultra-flat surfaces and rigid construction, this plate ideal for high throughput screening (HTS). Its ANSI/SLAS 1-2004 compliant footprint ensures that it will fit all standard fixtures, stackers, and heater/cooler blocks.
 
Raised rims on each well help protect from cross-contamination, reduce sample loss in storage, and make for enhanced sealing with adhesive films, silicone mats, or heat-sealing films. Made from Virgin Polypropylene, no mold release agents or regrind; RNase, DNase, DNA, and Pyrogen Free Certification.

Mid-height to maximize storage, utilizing 30-40% less vertical space in freezers, automated loaders, under the hood, and other locations where space is at a premium. Plates have stacking lugs to help prevent toppling. The design combines optimized well volume with automation-friendly features.

 
96-Round Well, V Bottom, Glass Coated MicroPlates

Glass-coated, polypropylene microplates. The 200 nm thick coating of silicone dioxide creates a cradle of non-binding and inert glass to protect your sample.  

This SiO2 coating helps to:

• Reduced binding
• Increase chemical resistance
• Protect the same from any potential compounds leached from the plastic

The plate design:

• The 96-round well V-bottom design minimizes reagent usage and provides the lowest residual volumes after pipetting (<0.1 l); designed for colorimetric assays and compound storage/ libraries, especially with automated systems.

• Consistent automated handling – ultra-flat surfaces, sidewall gripper lugs, and rigidity

• Durable – withstands repeated freeze/thaw cycles down to -20C without adversely affecting dimensional integrity

• Raised rims on each well help protect from cross-contamination and make for enhanced sealing with adhesive films, silicone mats, or heat sealing films

• Manufactured of exceptionally clear and inert virgin polypropylene (no mold release agents or regrind)

• Certified RNase, DNase, DNA, and Pyrogen Free

pureGrade Plates feature untreated surfaces for use in a variety of laboratory tasks, such as homogeneous assays, screening, and storage.

• pureGrade assay plates are offered in 96, 384, and 1536 well formats; 96-well plates are available in different well geometries
• Non-treated, non-sterile and made of Polystyrene
• Hydrophobic surface is perfect for homogenous standard assays and extensive screening assays
• Uncolored PS provides a high transparency with optimal optical characteristics
• Colors available include transparent, white and black, along with colored plates with transparent bottoms
• Gray alphanumeric coding on black and white plates
• Free from endotoxins, DNase, DNA, RNase
• Standard 384-well plates are packaged in 5 bags of 10 plates; transparent bottomed and low-volume plates are 2 bags of 25 plates
• Lids available separately

pureGrade™ 96-Well Untreated Assay Plates

• pureGrade™ Plates feature untreated surfaces for use in a variety of laboratory tasks, such as homogeneous assays, screening, and storage.
• pureGrade™ assay plates are offered in 96, 384, and 1536 well formats; 96-well plates are available in different well geometries
• Non-treated, non-sterile, and made of Polystyrene
• Hydrophobic surface is perfect for homogenous standard assays and extensive screening assays
• Uncolored PS provides a high transparency with optimal optical characteristics
• Colors available include transparent, white, and black, along with colored plates with transparent bottoms
• Gray alphanumeric coding on black and white plates
• Free from endotoxins, DNase, DNA, RNase
• Standard 96 well plates are packaged in 20 stacks of 5 plates; transparent bottomed plates are 4 bags of 25 plates
• Lids available separately

 
Specifications:

Well-Type	Description
F-Bottom	Flat well bottom. Designed for precise optical measurements, colorimetric determinations, and microscopy applications.
F-Trans Bottom	Transparent flat well bottom.
U-Bottom	Round shaped well bottom. Well suited for stirring and washing samples.
V-Bottom	Conical well bottom. For maximized sample recovery.
C-Bottom	Flat well bottom with curve.