Home  >  PCR, Protein, RNA, DNA
|◀ ◀ 49 - 60 of 69 ▶ ▶|
View:

Semi-Dry Blotting Systems, 10cm x 10cm


Choose Galileo Insight™ semi-dry sytems for rapid and efficient molecular transfer.
Galileo semi-dry electroblotters provide quick and efficient transfer of nucleic acids and proteins from agarose or acrylamide gels. Since only the tranfer "sandwich" of gel, membrane and blotting papers must be kept wet, much less buffer is required than traditional tank transfer systems. Solid plate style electrodes (stainless steel cathode and platinum anode) assure even and complete molecular transfer.

Item#:
ASSEMIDRYELECT1010
  • Small footprint for benchtop use
  • Preset and manual controls for ultraviolet or time exposures. Preset exposure delivers 120,000 microjoules or five minutes of exposure
  • Microprocessor measures and control UV output, ensuring maximum energy efficiency
  • Large LED display and touch panel which displays time or energy settings
  • Window on the door allows viewing of the process yet blocks out the UV radiation
  • Select from models with 302nm midrange UV, 365nm longwave UV or 254nm shortwave UV Interior: 12 deep x 10 wide x 5 high inches (305 x 254 x 127mm)
  • Overhead UV supplies uniform UV
  • Shortwave UV model is available with choice of door (CL-1000) or drawer (CX-2000) styles
  • Built-in UV sensor is calibrated at the UVP factory to ensure accuracy and reliability
  • Crosslinking for attaching nucleic acids to a membrane takes seconds as compared to oven baking

CL-1000 Dimensions: Exterior: 13.7 deep x 15.6 wide x 8.75 high inches (248 x 396 x 222mm)

CX-2000 Dimensions:
Exterior: 17.5"W x 15"D x 9.75"H (445 x 381 x 248mm)
Interior: 11.4"W x 11.3"D x 3.6"H (290 x 287 x 91mm)
Depth of sample tray 11.25 Width of sample tray 11.5
Sample surface to lamp approximately 3.5 in. (89mm)

1 year warranty

 

Model

Part No. 115V

Wavelength

Replacement Tubes

CL-1000

95-0174-01

254nm

34-0007-01

CL-1000L

95-0228-01

365nm

34-0006-01

CL-1000M

95-0230-01

302nm

34-0042-01

CX-2000

95-0339-01

254nm

34-0007-01
Item#:
ASPCRUVEQ3
  • Lamps are lightweight.
  • Models available include shortwave, longwave UV or a combination shortwave/longwave version
  • Combination version comes with a snap-on wavelength selector for switching between wavelengths
  • Use these lamps with the J-129 Lamp Stand (pictured) or the C-10 Cabinet
  • 1 year warranty

    Handheld Lamp Dimensions: 
    14.9"L x 3.2"W x 2.5"H
    Lamp Stand Dimensions: 9.5"H x 13"L
Item#:
ASPCRUVEQ1

Large Tank Blotter with two cassettes, 20 x 20cm

  • Designed to optimally transfer very large and difficult proteins.
  • Reproducible transfer results thanks to the plate electrodes made
  • of platinum-plated titanium (anode) and stainless steel (cathode).
  • Efficient cooling system: Water circulation system with alumina
  • ceramic wall located at the chamber base for effective heat
  • removal.
  • Safety lid: asymmetrical configuration of electrical contacts
  • prevents mismatching of electrodes.

Item#:
ASLARGETANKBLOT2020

Semi-Dry Blotting Systems, 20cm x 20cm

Choose Galileo Insight™ semi-dry sytems for rapid and efficient molecular transfer.
Galileo semi-dry electroblotters provide quick and efficient transfer of nucleic acids and proteins from agarose or acrylamide gels. Since only the tranfer "sandwich" of gel, membrane and blotting papers must be kept wet, much less buffer is required than traditional tank transfer systems. Solid plate style electrodes (stainless steel cathode and platinum anode) assure even and complete molecular transfer.

The larger format 2020 system is ideal for transfer of larger gels or simultaneous transfer of multiple smaller gels. System is supplied complete with power leads and a sample pack of our ultra-pure cotton fiber filter paper.
Item#:
ASSEMIELECT2020
w/ Bottom Spring for Stnd.

Limited volume inserts are available in either glass or polypropylene and both conical and flat bottom varieties. For inserts with polymer bottom spring, the spring acts as a shock absorber that protects against breakage if the needle bottoms out. The conical inserts permit complete sample removal.

4005BS-425 50 uL Glass Conical Insert w/ Bottom Spring---case pack of 100
4015BS-529 100 uL Glass Conical Insert w/ Plastic Flange-case pack of 100
4025-531 250 uL Glass Flat Bottom Insert-case pack of 1000
Item#:
4015BS-529
Your Price:
61.98
Each

Limited volume inserts are available in either glass or polypropylene and both conical and flat bottom varieties. For inserts with polymer bottom spring, the spring acts as a shock absorber that protects against breakage if the needle bottoms out. The conical inserts permit complete sample removal.

4005BS-425 50 uL Glass Conical Insert w/ Bottom Spring---case pack of 100
4015BS-529 100 uL Glass Conical Insert w/ Plastic Flange-case pack of 100
4025-531 250 uL Glass Flat Bottom Insert-case pack of 1000
Item#:
ASCHROMVIAL2
20mL, 23x75mm, flat bottom

20mL Clear Headspace Vial with Flat bottom

Consistently and Quality Made with Affordable Prices: Excellence in Chromatography

Standard 20mm aluminum seal Headspace Vials with Flat Bottoms that form a tight seal with closure for accurate analysis and reproducible results. They are especially useful to heat the samples until the concentration of the gas and liquid phases are in equilibrium so samples can then be taken from the gas phase (headspace).

Clear Headspace Vials with Flat bottoms are available in clear type I borosilicate glass with crimp finishes and can be perfectly sealed with 20 mm Poly Crimp⢠Seal or Aluminum Seals - use with Agilent, Hewlett-Packard, Carlo Erba, Perkin Elmer and Shimadzu analyzers.

These vials make an excellent choice to daily chromatographic experiments in the lab combining the highest quality and consistent results with low cost. A must have for your research.

  • Type: Standard Headspace Vial
  • Volume: 20mL
  • Vial dimensions (diameter x height): 23mm x 75mm
  • Bottom: Flat
  • Crimp: 20mm
  • Color: Clear
  • Material: Borosilicate Glass
Item#:
320020-2375
Your Price:
494.07
Each
PP, 12x32mm, Large Opening

Polypropylene R.A.M. Limited volume vials are 2 mL overall, but with a working volume of 100 uL. These vials accept 9 mm screw caps. Compatible with most autosamplers including Agilent.

Case pack of 1000 vials

Item#:
30109P-1232
Your Price:
233.41
Each
  • The Microplate Replicator is a simple and inexpensive time saver which is ideal for transferring small volumes of innoculum from 96 well microplates to other microplates or solid supports.

  • It can be used for replication of cosmid and YAC libraries, innoculation of filters for colony hybridization, antibiotic sensitivity testing, phage typing and a host of other uses.

  • The Replicator's pins are durable stainless steel that are precision aligned to ensure long term performance and its comfortable handle remains cool to the touch during repeated flame sterilization.

  • The Microplate Replicator is supplied with an anodized aluminum storage pan which also serves as an ethanol container during flame sterilization and cleansing pads for easy removal of built up debris.
  • Warranty: Two Year Parts and Labor
Item#:
ASCHROMPLACC1
White PP 24-400mm Solid Top

40mL Precleaned VOA Vials - Class 2

Consistently and Quality Made with Affordable Prices: Excellence in Chromatography

These Precleaned Volatile Organic Analysis (VOA) Vials are assembled with solid top white polypropylene caps and are PTFE lined.

As CLASS 2 (Pre-cleaned) containers the vials are processed according to E.P.A. recommended procedures:

  • Washed with laboratory-grade biodegradable, non-phosphate detergent
  • Rinsed with ASTM Type I De-ionized water
  • Oven dried
  • Assembled in a contaminate-free environment

 

Also, the exterior of each case is labeled with a lot number and each case contains a copy of the "Standard Operating Procedure" for washing.

These VOA Class 2 vials make an excellent choice to daily chromatographic experiments in the lab combining the highest quality and consistent results with low cost. A must have for your research.


Specifications:

  • Capacity: 40mL
  • Material Type: Borosilicate Glass
  • Color: Clear
  • Cap Color: White
  • Cap Type: Solid Top, PTFE Lined
  • Cap Size: 24-400mm
Item#:
9-089
Your Price:
131.89
Each
Vial/Insert 9mm Neck, Screw
This item has been discontinued and replaced by item 

Limited volume R.A.M. Vials are composed of the glass vial and a clear glass insert fused together thus eliminating any movement of the insert and concerns about contaminants around the fused seam/space between the neck of the vial and the insert. These vials are available in clear or amber borosilicate glass and accept 9 mm screw caps. Compatible with most autosamplers including Agilent.

These vials come with white marking spot, which can be written on with a #2 pencil

Case pack of 100 vials.

Item#:
30209-1232
Your Price:
123.74
Each
This item is discontinued
|◀ ◀ 49 - 60 of 69 ▶ ▶|
View: