Home  >  PCR, Protein, RNA, DNA
|◀ ◀ 505 - 516 of 578 ▶ ▶|
View:
Vial/Insert 9mm Neck, Screw
This item has been discontinued and replaced by item 

Limited volume R.A.M. Vials are composed of the glass vial and a clear glass insert fused together thus eliminating any movement of the insert and concerns about contaminants around the fused seam/space between the neck of the vial and the insert. These vials are available in clear or amber borosilicate glass and accept 9 mm screw caps. Compatible with most autosamplers including Agilent.

These vials come with white marking spot, which can be written on with a #2 pencil

Case pack of 100 vials.

Item#:
30209-1232
Your Price:
123.74
Each
This item is discontinued
100/pk
  • Provides exceptional seal to safeguard samples during transport or storage
  • Eliminates well to well contamination and cross-over in PCR applications when used with Axygen's compression mat
  • Polypropylene film is wide temperature range compatible, -40° to 104°C
  • PCR-TS is designed for ELISA/EIA applications
  • CR-TS-900 is twice as thick (as PCR-TS) and is suitable for water-bath and other difficult PCR applications
Item#:
PCR-TS
Your Price:
119.85
Each

Shallow-well 96-well black microplate for lower volume and increased sensitivity.

Item#:
ASPEOPTIPLT

Silicone Mats, Square

Compression molded silicone sealing mats with 8.2 x 8.2mm square plugs, are designed for 96-square well storage and assay plates. Produced from the highest quality research grade silicone, they are specially designed to provide a positive and airtight seal. Mats fit tightly into wells preventing evaporation of VOCs, sample loss in storage, cross contamination, and reducing the risk of aerosols and pathogens venting during the automation process. They work in a wide range of temperatures for incubation and storage applications; especially for storage at higher temperatures or for applications involving aggressive solvents.
These seals pare well with automation as-well-as manual laboratory protocols. Often used in high-throughput applications or those involving accessing the sample through the cover multiple times. High quality silicone, resists coring and tearing reducing the risk or mat particulate entering the well. Well perforations will seal themselves, after penetration, ensuring an airtight closure.
These mats are chemically resistant and reusable; containing no adhesives or extractables to contaminate samples. Made of research-grade silicone, they can be autoclaved, and following a 10% bleach wash and ethanol rinse protocol may be reused. Printed alpha numeric grid for easy reference.
Item#:
ASSILCONEMATSQR
mm Screw Thread Neck Clear

12x32mm Standard Opening Screw Thread Vials, 8-425mm Neck Finish

Consistently and Quality Made with Affordable Prices: Excellence in Chromatography

These Standard Opening Screw Thread Vials have a narrow opening allowing the use of 8-425mm caps and septa. They are designed to work with most autosamplers that require narrow neck vials and are made up of Type I Borosilicate Glass.


The 12x32mm Standard Opening Screw Thread Vials with 8-425mm Neck Finish make an excellent choice to daily chromatographic experiments in the lab combining the highest quality and consistent results with low cost. A must have for your research.

Specifications:

  1. Volume: 2.0mL
  2. Color: clear
  3. Without marking spot
  4. Vial dimensions (diameter x height): 12 x 32mm
  5. Thread size: 8-425mm
  6. Type I Borosilicate Glass
Item#:
32008-1232
Your Price:
195.60
Each

96 x 1.0 mL Round Microplate

  • Ideal for high throughput applications and storage of samples
  • DNase/RNase free, sterile and non-sterile packaging
  • Steel freezer storage racks available
These deep well microplates are ideal for high throughput applications and storage of samples. They are compatible with sample processing workstations, microplate processing equipment and many microplate centrifuge rotors. Each of these plates has 96 round wells in a standard 8 x 12 format.

The 0.5 ml plates are manufactured from polypropylene for excellent temperature and chemical resistance. They can be frozen or autoclaved and when used with the strip caps (available separately), are perfect for freezer storage of samples. Well bottoms are conically shaped. Available in either polypropylene or polystyrene with round well bottoms, the 1.0 ml plates meet SBS standards and are DNase/RNase free. The polypropylene plates are useful for a variety of applications where temperature and chemical resistance is required. Polystyrene plates are ideal for cell adhesion applications. Strip caps and sealing mats are sold separately. Clear adhesive tapes, thermal sealing film and thermal sealing foil are also available.
Item#:
AS96RMICPLA


96-Deep Well Plate, Round Well, V-Bottom 33 mm

 

These round deep-well V-bottom plates combine working volume with an automation-friendly design. Sturdy and warp-resistant design with ultra-flat surfaces and rigid construction, this plate is ideal for high throughput screening, sample collection, compound storage, screening, and combinatorial chemistry applications. It is compatible with stackers, grippers, heater/cooler blocks, and other instruments that comply with the ANSI/SLAS 2004-1 (SBS) footprint.


Raised rims on each well help protect from cross-contamination, minimize sample loss during storage, and make for enhanced sealing with adhesive films, silicone mats, or heat-sealing films. Manufactured of inert, chemically resistant, and exceptionally clear virgin polypropylene.
Made from medical grade virgin polypropylene (no mold release agents or regrind); certified RNase, DNase, DNA, and Pyrogen Free.
  

  • Uniform wall thickness
  • Easy well identification with molded-in alpha-numeric position markings
  • Raised rims for easy and secure sealing with adhesive films, silicone mats, or heat-sealing films
  • Raised rims help protect from cross contamination


Item#:
AS96DPWELRWVPLAT

Sealing Mat for 96 Square Well Microplate

  • Sealing mats are available for the 96 well plates
  • The mats seal each well individually
  • Plates are DNAse/RNase free and supplied sterile or nonsterile
  • Package Dimensions ‏ : ‎ 12 x 12 x 12 inches; 12 Pounds
Plates with 0. 5 and 1. 0 mL well volumes have round wells while 2. 0 mL plates have square wells. All wells have conical bottoms to aid in sample recovery. All of the plates are available in polypropylene for excellent temperature and chemical resistance. They can be frozen or autoclaved, and when used with sealing mats (available separately), are perfect for freezer storage of samples.
Item#:
ASSEALMAT96

Silicone Sealing Mats for PCR


 PCR Silicone Sealing Mat, 96-well, “-” perforated; with printed alphanumeric.  Packaged 10 Mats per bag, 5 bags per cas
Item#:
ASILICONESEALMATP
Item#:
ASSQRSEALMAT
Patented Top Spring for

Limited volume inserts available in both glass and polypropylene, either conical or flat bottom.

Inserts available with either polymer bottom spring or patented Top Spring, which acts as a shock absorber and protects against breakage if needle bottoms out. The conical inserts allow for complete sample removal.

401TS-529 100 uL Glass conical Insert w/ glass flange---case pack of 100
4025-629 250 uL Glass Big Mouth conical insert, no spring-case pack of 100
4025BS-629 250 uL Glass Big Mouth conical insert w/ bottom spring-case pack of 100
4035-630 350 uL Glass Flat Bottom insert-case pack of 1000

Item#:
401TS-529
Your Price:
117.14
Each
w/Caps, 1000/cs
  • They are primarily used for liquid scintillation counting, beta-gamma counting, and sample storage.
  • Made from a new type of polypropylene which assures superior visibility.
  • White polyethylene caps are perfect for convenient, easy marking.
  • Nominal Volume Of 5ml
  • High Density White Polypropylene Snap Cap
  • Alternate White Plug Cap
Item#:
8620
Your Price:
54.82
Each
This item is discontinued
|◀ ◀ 505 - 516 of 578 ▶ ▶|
View: