Eclipse™ Pipette Tips 

Eclipse™ pipette tips include as standard many features available from other suppliers only as special upgrades. All the Eclipse™ tips we make are made of high quality 100% pure virgin medical grade polypropylene, so you won't find recycled plastics in our tips. We pre-test the resin to ensure no extractables are present. Every lot is lab tested and certified free of detectable Nuclease (RNase/DNase), Endotoxin (pyrogen) contamination and certified to U.S.P. results. Resins are pre-tested for metal contamination. All our Eclipse™ tips in racks are packed in our trademark Teal racks. These racks are made of polypropylene and are autoclavable repeatedly. They have sturdy latch hinges that won't come apart like lesser quality tip racks and a special snap lock designed so that it will not catch on your gloves. You can also get Eclipse™ tips in resealable zip style bags, in refills for our Pagoda® system, in Eclipse™ refills, and in racks that have been sterilized using irradiation.

For Rainin® LTS Pipettors

1011- 20 uL Pipette Tips
1018- 250 uL Pipette Tips
1015- 300 uL Pipette Tips
1019- 1200 uL Pipette Tips

• Fits the Lite Touch™ pipettors from Rainin®
• Made of clear, pretested polypropylene resin
• Lot certified pure and free of detectable ATP, RNase/DNase (Nuclease), Endotoxin and are non-pyrogenic

For Eppendorf and Brand Pipettors

1032- 100 uL Bevel Point™ Pipette Tips, Yellow

• Ribbed top ensures solid ejection
• Beveled end retains less fluid
• Designed with wide sealing areas to fit even older pipettor barrels
• Available in yellow polypropylene

For Sartorius®  Pipettors

1048- 1200 uL Pipette Tips with UltraFine™ Points
1044- 1250 uL Pipette Tips with UltraFine™ Points

• Fine end point that fits into small micro tubes and deep well plates
• Extra length gives you more head room above the sample to prevent contaminating the pipettor barrel
• Available in clear polypropylene

For Matrix®  Impact 2®  Pipettors

1047- 1250 uL Pipette Tips with UltraFine™ Point, Extra Length

• Fine end point that fits into small micro tubes and deep well plates
• Extra length gives you more head room above the sample to prevent contaminating the pipettor barrel
• Available in clear polypropylene

For 16-Channel Finnpipette Pipettors

1007- 50 uL Pipette Tips with UltraFine™ Point

• Fill 384-well plates
  
• Very small but very straight tips in special heavy racks
  
• Clear, 100% polypropylene

Resealable Bags
Supplied in resealable polyethylene bags.  These are not recommended if you plan to store the tips for long periods since warping can occur after long periods of storage in bags.

96 Racks
Offer workhorse reliability and versatility.  They have heavy hook hinges that are extremely durable and an ergonomic snap-latch that won’t catch gloves.  Smooth rounded edges and a reinforced seal make these racks durable additions to your lab.  Strong enough to be autoclaved many times. The separate rack insert includes a beveled top an extra-sturdy surface for multi-channel pipetting.  A vent in the rack sides allows steam autoclaving to be more efficient and assures your tips are sterile.

Eclipse Refills
Can be used to refill Labcon and some other brands of pipette racks.   Low carbon footprint makes them an ideal solution to waste reduction goals for your lab.  They refill racks without your having to touch the tips or racks, so you don’t need gloves.

96 Stack Racks
This package gives you the best of both worlds; low cost and a complete high-quality rack.  You assemble the rack yourself and insert the fully racked refills into the rack.  Since you never touch the tips you don’t have to be concerned about contamination from your hands or latex gloves.  These stacks are very stable so you can pipette with a multi-channel pipette right from the stack.
 

Eclipse™ FlexTop™ Low Force Pipette Tips

Labcon Eclipse™ FlexTop™ Low Force pipette tips are designed to fit onto most popular pipettors and eject with forces shown to help reduce the risk of strain injury. By using these low force tips you don’t have to invest in special pipettors to gain all the advantages of low force pipetting. These ultimate tips feature a uniquely thin and flexible top that conforms to the pipette barrel unlike any other tips. They also include a non-beveled point that is so precise you can easily expel the tiniest amount of sample. And the top mounting is beveled to ensure that multichannel pipettes are easy to mount. FlexTop™ tip are made of clear 100% virgin polypropylene. Like all Labcon tips these tips are autoclavable along with their racks. Our FlexTop™ tips in racks are packed in our trademark Teal racks. These racks are made of polypropylene and are autoclavable repeatedly. They have sturdy latch hinges that won't come apart like lesser quality tip racks and a special snap lock designed so that it will not catch on your gloves. You can also get FlexTop™ tips in resealable zip style bags, in refills for our Pagoda® system, in Eclipse® style refills, and in racks that have been sterilized using irradiation.
 

1016 - 30 µL FlexTop™ Pipette Tips with UltraFine™ Point
1017 - 200 µL FlexTop™ Pipette Tips with UltraFine™ Point
1014 - 300 µL FlexTop™ Pipette Tips with UltraFine™ Point
1012 - 200 µL Extended FlexTop™ Pipette Tips with UltraFine™ Point
1045 - 1250 µL Extended FlexTop™ Pipette Tips with UltraFine™ Point
1042 - 1250 µL Extended FlexTop™ Wide Orifice Pipette Tips
 

Packaging

Individually Wrapped
Packaged in thermal sealed polyethylene bags.  These tips have been radiation sterilized.  This package is designed to provide the highest assurance that the tips you use are pure.

Bulk Pack
Tips are supplied in one large bag inside a corrugated container.  These are not recommended for long term storage due to warping.

96 Rack
Offer workhorse reliability and versatility.  They have heavy hook hinges that are extremely durable and an ergonomic snap-latch that won’t catch gloves.  Smooth rounded edges and a reinforced seal make these racks durable additions to your lab.  Strong enough to be autoclaved many times. The separate rack insert includes a beveled top an extra-sturdy surface for multi-channel pipetting.  A vent in the rack sides allows steam autoclaving to be more efficient and assures your tips are sterile. 

Eclipse Refills
Can be used to refill Labcon and some other brands of pipette racks.   Low carbon footprint makes them an ideal solution to waste reduction goals for your lab.  They refill racks without your having to touch the tips or racks, so you don’t need gloves.
 

These items have been discontinued. For alternative options, check out our PR1MA Tips.
 
Still can’t find what you’re looking for?
 Contact us or email tech@midsci.com for more information!
 

Avant Maxymum Recovery Barrier Pipette Tips

Maxymum Recovery Aerosol Barrier Tips have a technologically advanced filter material which contains no leachable additives and allows free passage of air while preventing passage of aerosols. Maxymum Recovery technology guarantees unsurpassed accuracy and prevents wastage of precious samples.

• Maxymum Recovery low-binding technology allows complete recovery of precious samples and optimizes pipettor accuracy
• Graduated and beveled, clear
• Universal fit (except TF400-L-R-S)
• Sterile, certified DNAse/RNAse and pyrogen-free
• Please give us a call for a sample!

Labcon APT™ Automation Pipette Tips

Labcon automation pipet tips APT™ for Beckman® FX, NX and other brands are designed and tested to fit your workstation. Made from pure pre-tested medical grade resins to ensure the integrity of your work. Each lot is tested and certified free of ATP, RNase/DNase (Nuclease), and Endotoxins (non-pyrogenic). Resins are pre-tested with a USP test method to ensure they are free of Oleamide and Phalates. Unlike tips sold as “pre-sterile” these tips use a validated medical grade sterilization process. You can use these tips in diagnostics, regulated testing, and medical screening procedures.

Labcon Robotic Pipette Tips are made of virgin polypropylene and furnished pre-racked in extra-heavy automation grade polypropylene racks and are autoclavable.

• 8005 – P30 AP384 Style, 30 uL capacity
• 8014 – P20 AP96 Style, 100 uL capacity
• 8114 – P20 AP96 Style, with Filter, 100 uL capacity
• 8024 – P50XL AP96 Style, 90 uL capacity
• 8017 – P250XL AP96 Style, 220 uL capacity
• 8117 – P250XL AP96 Style, with Filter, 220 uL capacity

Proudly made in the USA! Click here for more made in America products!
  

Labcon SuperSlik® Protease Free Pipette Tips

SuperSlik® Low Retention tips have a proprietary modified polypropylene surface that limits the adhesion of cells, rDNA, proteins, and other viscous materials. Their accuracy and precision is up to 10 times better with viscous samples than standard non-wettable polypropylene. SuperSlik® tips are made from our own proprietary resin formulation that uses no additives or coatings that migrate into your samples. Unlike low retention tips from many others, SuperSlik® tips use no restricted chemicals and meet RoHS regulations. The resin helps increase the contact angle of fluids and lets you dispense the maximum amount of sticky DNA molecules. These tips were developed in our own laboratory and have been found to be ideal for viscous samples. Low retention tips are best suited for pipetting thick or sticky fluids and may not be appropriate for all uses.

Bulk Pack
Tips are supplied in one large bag inside a corrugated container. These are not recommended for long-term storage due to warping. 

96 Rack
Offer workhorse reliability and versatility. They have heavy hook hinges that are extremely durable and an ergonomic snap-latch that won’t catch gloves. Smooth rounded edges and a reinforced seal make these racks durable additions to your lab. Strong enough to be autoclaved many times. The separate rack insert includes a beveled top an extra-sturdy surface for multi-channel pipetting. A vent in the rack sides allows steam autoclaving to be more efficient and assures your tips are sterile. The long thin design of the 192 rack allows for more working space on the lab bench.

Eclipse Refills
Can be used to refill Labcon and some other brands of pipette racks. Low carbon footprint makes them an ideal solution to waste reduction goals for your lab. They refill racks without your having to touch the tips or racks, so you don’t need gloves.

Proudly made in the USA! Click here for more made in America products!
 

Labcon ZAP™ Slik Aerosol Filter Universal Pipette Tips

ZAP™ Slik Aerosol filter Pipette Tips from Labcon combine the higher standard of ZAP™ filters with our own unique low retention pipette tips. These aerosol tips provide you with complete protection from sample carry-over at the same time they reduce sample retention. Incorporating a robotically inserted 10 um filter with a sponge-like porous pathway ZAP™ Slik tips have such a small pore they even block fluids in the unlikely event that you should over-pipette. And our SuperSlik®; polypropylene increases the hydrophobicity of tips surfaces, so they have up to 10 times less fluid retention.

ZAP™ Slik Aerosol Filter Pipette Tips have been proven in independent studies to block aerosol contamination. But unlike some leading brands of self-sealing aerosol resistant pipette tips they have no cellulose gum, toluene solvent, or colored dyes in the filter to mix with and contaminate your sample. Also, unlike self-sealing aerosol tips ZAP™ tips can be autoclaved in a steam autoclave. And ZAP™ tips will not wick fluids like cellulose filled aerosol resistant tips so you don't have to worry about how you hold your pipettor. Our ZAP™ tips in sterile racks, like all our other sterile products, receive valid sterilization processing compliant with ISO 11137. So unlike "pre-sterile" tips from other pipette tip suppliers you can use ZAP™ Slik tips for diagnostic and regulated procedures. And ZAP™ Slik tips are RoHS compliant, unlike other low retention tips, so you don't have to worry that additives will migrate into your sample.

• 1171 - 10 uL ZAP™ Slik Pipette Tips
• 1172 - 10 uL Extended Length with TubeGuard™ ZAP™ Slik Pipette Tips
• 1173 - 10 uL Extra-Long ZAP™ Slik Pipette Tips
• 1175 - 20 uL ZAP™ Slik Pipette Tips
• 1143 - 20 uL ZAP™ Slik Pipette Tips for Rainin® LTS™
• 1174 - 100 uL ZAP™ Slik Pipette Tips
• 1179 - 200 uL ZAP™ Slik Pipette Tips
• 1144 - 200 uL ZAP™ Slik Pipette Tips for Rainin® LTS™
• 1146 - 200 uL Wide Orifice ZAP™ Slik Pipette Tips
• 1178 - 300 uL ZAP™ Slik Pipette Tips
• 1142 - 300 uL ZAP™ Slik Pipette Tips for Rainin® LTS™
• 1147 - 300 uL Extended Length ZAP™ Slik Pipette Tips
• 1177 - 1000 uL ZAP™ Slik Pipette Tips
• 1145 - 1000 uL ZAP™ Slik Pipette Tips for Rainin® LTS™
• 1148 - 1000 uL ZAP™ Slik Wide Orifice Pipette Tips

Packaging

96 Rack
Offer workhorse reliability and versatility. They have heavy hook hinges that are extremely durable and an ergonomic snap-latch that won’t catch gloves. Smooth rounded edges and a reinforced seal make these racks durable additions to your lab. Strong enough to be autoclaved many times. The separate rack insert includes a beveled top an extra-sturdy surface for multi-channel pipetting. A vent in the rack sides allows steam autoclaving to be more efficient and assures your tips are sterile. The long thin design of the 192 rack allows for more working space on the lab bench.

Eclipse UNO Refills
Bring the same ease, value, and low carbon footprint of Eclipse refills to aerosol filter tips. These refills use a validated sterile process and include an expiration date on every pack. Eclipse packaging in made exclusively from recyclable and renewable materials.

Proudly made in the USA! Click here for more made in America products!

Six-Place Linear Pipette Stand

• Colorful six place pipette holder for your benchtop
• Constructed of cast acrylic for years of use

The PST-60 is a six-place pipette holder that accepts most major brands of pipettes and will brighten up your bench top as well. The pipette stand is made of durable, fluorescent orange ¼" cast acrylic for years of use. The skid resistant feet will prevent the stand from sliding on your bench top

Labcon LTS Style Low Binding Tips - Bulk Lid

SuperSlik® Low Retention tips have a proprietary modified polypropylene surface that limits the adhesion of cells, rDNA, proteins, and other viscous materials. Their accuracy and precision is up to 10 times better with viscous samples than standard non-wettable polypropylene. SuperSlik® tips are made from our own proprietary resin formulation that uses no additives or coatings that migrate into your samples. Unlike low retention tips from many others, SuperSlik® tips use no restricted chemicals and meet RoHS regulations. The resin helps increase the contact angle of fluids and lets you dispense the maximum amount of sticky DNA molecules. These tips were developed in our own laboratory and have been found to be ideal for viscous samples. Low retention tips are best suited for pipetting thick or sticky fluids and may not be appropriate for all uses.

1161 – SuperSlik® 10 uL Pipette Tips with UltraFine™ Point
1162 - SuperSlik® 10 uL Extended Length Pipette Tips with TubeGuard™
1165 - SuperSlik® 10 uLL Extra-Long Pipette Tips
1065 - SuperSlik® 200 uL Pipette Tips with BevelPoint™
1167 - SuperSlik® 100 uL Pipette Tips for Eppendorf® Pipettors
1164 - SuperSlik® 250 uL Wide Orifice Pipette Tips for Whole Cells
1166 - SuperSlik® 250 uL UltraFine™ Point Pipette Tips
1169 - SuperSlik® 300 uL Pipette Tips with BevelPoint™
1168 - SuperSlik® 1250 uL UltraFine™ Point Pipette Tips
1066 - SuperSlik® 20 uL Pipette Tips for Rainin® LTS™ Pipettors
1067 - SuperSlik® 250 uL Pipette Tips for Rainin® LTS™ Pipettors
1160 - SuperSlik® 300 uL Pipette Tips for Rainin® LTS™ Pipettors
1068 - SuperSlik® 1000 uL Pipette Tips for Rainin® LTS™ Pipettors 

Packaging

Proudly made in the USA! Click here for more made in America products!
 

Labcon Zap™ Slik Aerosol For Rainin LTS Pipettor Tips

ZAP™ Slik Aerosol filter Pipette Tips from Labcon combine the higher standard of ZAP™ filters with our own unique low retention pipette tips. 

Packaging

96 Rack
Offer workhorse reliability and versatility. They have heavy hook hinges that are extremely durable and an ergonomic snap-latch that won’t catch gloves. Smooth rounded edges and a reinforced seal make these racks durable additions to your lab. Strong enough to be autoclaved many times. The separate rack insert includes a beveled top an extra-sturdy surface for multi-channel pipetting. A vent in the rack sides allows steam autoclaving to be more efficient and assures your tips are sterile. The long thin design of the 192 rack allows for more working space on the lab bench.

Eclipse UNO Refills
Bring the same ease, value, and low carbon footprint of Eclipse refills to aerosol filter tips. These refills use a validated sterile process and include an expiration date on every pack. Eclipse packaging in made exclusively from recyclable and renewable materials.

Proudly made in the USA! Click here for more made in America products!